IDE Installer Version 1.2.0

This program is provided by means of shareware.
If you find it useful (i.e. your drive now works) I
would appreciate $5 U.S. funds to help offset my
costs of development.

David Heritage
1200 N. Perkins Apt#C6
Stillwater, OK   74075

IDEInst.exe is a file created for those out there
having problems installing a 4x or 6x drive into an
existing installation of OS/2 WARP.  It will allow
the user to choose the settings for their IDE
interface and install the necessary drivers for the
drives' use.

You do not need to run Selective Install, but you will
need to have your installation materials handy.  If
you originally installed OS/2 from a CDRom, but
have replaced it with the one you are using (i.e. you
had a double speed, removed it and are replacing it
with a 4x/6x IDE), then you will need to do one of
two things: 1) Resetup your old cdrom for the time
being so this program can access your cdrom for
installation, or 2) you can make disk images of
disks 1, 2, 9, and 12 ( If you make disk
images,make sure to tell the installation that you
have a diskette version).

** Changes in this Version

IDEInst.exe will now support HDD installations
through drive letter R.  You still must use floppy
drive A to install from diskettes.



There is no warranty implied or otherwise with this
software.  I am in no way responsible for damage
done by the use of it on your machine.  However, if
you do experience difficulty, please send email to:
vertigo@okstate.edu with subject title: BUG REPORT.

IDEInst.exe was originally tested on a 486dx/33
running red-box, a dx2/80 running blue-box, and a
dx4/100 running blue-box connect.

IDEInst.exe Copyright (c) 1995 David J. Heritage
All Rights Reserved