# This file is part of reLyX # Copyright (c) 1998-9 Amir Karger karger@post.harvard.edu # You are free to use and modify this code under the terms of # the GNU General Public Licence version 2 or later. package BasicLyX; # This package includes subroutines to translate "clean" LaTeX to LyX. # It translates only "basic" stuff, which means it doesn't do class-specific # things. (It uses the TeX parser Text::TeX) use strict; use RelyxTable; # Handle LaTeX tables use RelyxFigure; # Handle LaTeX figures use Verbatim; # Copy stuff verbatim use vars qw($bibstyle_insert_string $bibstyle_file $Begin_Inset_Include); $bibstyle_insert_string = "%%%%%Insert bibliographystyle file here!"; $bibstyle_file = ""; $Begin_Inset_Include = "\\begin_inset Include"; #################### PACKAGE-WIDE VARIABLES ########################### my $debug_on; # is debugging on? ###### #Next text starts a new paragraph? # $INP = 0 for plain text not starting a new paragraph # $INP = 1 for text starting a new paragraph, so that we write a new # \layout command and renew any font changes for the new paragraph # Starts as 1 cuz if the first text in the document is plain text # (not, e.g., in a \title command) it will start a new paragraph my $IsNewParagraph = 1; my $OldINP; #Save $IsNewParagraph during footnotes # Some layouts may have no actual text in them before the next layout # (e.g. slides). Pending Layout is set when we read a command that puts us # in a new layout. If we get some regular text to print out, set it to false. # But if we get to another layout command, first print out the command to # start the pending layout. my $PendingLayout = 0; # HACK to protect spaces within optional argument to \item my $protect_spaces = 0; # $MBD = 1 if we're in a list, but haven't seen an '\item' command # In that case, we may need to start a nested "Standard" paragraph my $MayBeDeeper = 0; my $OldMBD; #Save $MBD during footnotes -- this should very rarely be necessary! # Stack to take care of environments like Enumerate, Quote # We need a separate stack for footnotes, which have separate layouts etc. # Therefore we use a reference to an array, not just an array my @LayoutStack = ("Standard"); #default if everything else pops off my $CurrentLayoutStack = \@LayoutStack; # Status of various font commands # Every font characteristic (family, series, etc.) needs a stack, because # there may be nested font commands, like \textsf{blah \texttt{blah} blah} # CurrentFontStatus usually points to the main %FontStatus hash, but # when we're in a footnote, it will point to a temporary hash my %FontStatus = ( '\emph' => ["default"], '\family' => ["default"], '\series' => ["default"], '\shape' => ["default"], '\bar' => ["default"], '\size' => ["default"], '\noun' => ["default"], my $CurrentFontStatus = \%FontStatus; # Currently aligning paragraphs right, left, or center? my $CurrentAlignment = ""; my $OldAlignment; # Save $AS during footnotes # Global variables for copying tex stuff my $tex_mode_string; # string we accumulate tex mode stuff in my @tex_mode_tokens; # stack of tokens which required calling copy_latex_known # LyX strings to start and end TeX mode my $start_tex_mode = "\n\\latex latex \n"; my $end_tex_mode = "\n\\latex default \n"; # String to write before each item my $item_preface = ""; ############# INFORMATION ABOUT LATEX AND LYX ############################# # LyX translations of LaTeX font commands my %FontTransTable = ( # Font commands '\emph' => "\n\\emph on \n", '\underline' => "\n\\bar under \n", '\underbar' => "\n\\bar under \n", # plain tex equivalent of underline? '\textbf' => "\n\\series bold \n", '\textmd' => "\n\\series medium \n", '\textsf' => "\n\\family sans \n", '\texttt' => "\n\\family typewriter \n", '\textrm' => "\n\\family roman \n", '\textsc' => "\n\\shape smallcaps \n", '\textsl' => "\n\\shape slanted \n", '\textit' => "\n\\shape italic \n", '\textup' => "\n\\shape up \n", '\noun' => "\n\\noun on \n", # LyX abstraction of smallcaps # Font size commands '\tiny' => "\n\\size tiny \n", '\scriptsize' => "\n\\size scriptsize \n", '\footnotesize' => "\n\\size footnotesize \n", '\small' => "\n\\size small \n", '\normalsize' => "\n\\size default \n", '\large' => "\n\\size large \n", '\Large' => "\n\\size Large \n", '\LARGE' => "\n\\size LARGE \n", '\huge' => "\n\\size huge \n", '\Huge' => "\n\\size Huge \n", # This doesn't work yet! #'\textnormal' => "\n\\series medium \n\\family roman \n\\shape up \n", # Things LyX implements as "Floats" my %FloatTransTable = ( # Footnote, Margin note '\footnote' => "\n\\begin_float footnote \n", '\thanks' => "\n\\begin_float footnote \n", # thanks is same as footnote '\marginpar' => "\n\\begin_float margin \n", # Environments that LyX implements as "floats" my %FloatEnvTransTable = ( "table" => "\n\\begin_float tab \n", "table*" => "\n\\begin_float wide-tab \n", "figure" => "\n\\begin_float fig \n", "figure*" => "\n\\begin_float wide-fig \n", # Simple LaTeX tokens which are turned into small pieces of LyX text my %TextTokenTransTable = ( # LaTeX escaped characters '\_' => '_', '\%' => '%', '\$' => '$', '\&' => '&', '\{' => '{', '\}' => '}', '\#' => '#', '\~' => '~', '\^' => '^', # \i and \j are used in accents. LyX doesn't recognize them in plain # text. Hopefully, this isn't a problem. '\i' => '\i', '\j' => '\j', # Misc simple LaTeX tokens '~' => "\n\\protected_separator \n", '@' => "@", # TeX.pm considers this a token, but it's not really '\@' => "\\SpecialChar \\@", '\ldots' => "\n\\SpecialChar \\ldots\{\}\n", '\-' => "\\SpecialChar \\-\n", '\LaTeX' => "LaTeX", '\LaTeXe' => "LaTeX2e", '\TeX' => "TeX", '\LyX' => "LyX", '\hfill' => "\n\\hfill \n", '\noindent' => "\n\\noindent \n", '\textbackslash' => "\n\\backslash \n", '\textgreater' => ">", '\textless' => "<", '\textbar' => "|", # LyX translations of some plain LaTeX text (TeX parser won't recognize it # as a Token, so we need to translate the Text::TeX::Text token.) my %TextTransTable = ( # Double quotes "``" => "\n\\begin_inset Quotes eld\n\\end_inset \n\n", "''" => "\n\\begin_inset Quotes erd\n\\end_inset \n\n", # Tokens that don't start with a backslash, so parser won't recognize them # (LyX doesn't support them, so we just print them in TeX mode) '?`' => "$start_tex_mode?`$end_tex_mode", '!`' => "$start_tex_mode!`$end_tex_mode", # Things that LyX translates as "LatexCommand"s # E.g., \ref{foo} ->'\begin_inset LatexCommand \ref{foo}\n\n\end_inset \n' # (Some take arguments, others don't) my @LatexCommands = map {"\\$_"} qw(ref pageref label cite bibliography index printindex tableofcontents listofalgorithms listoftables listoffigures); my @IncludeCommands = map {"\\$_"} qw(input include); # Included postscript files # LyX 1.0 can't do \includegraphics*! my @GraphicsCommands = map {"\\$_"} qw(epsf epsffile epsfbox psfig epsfig includegraphics); # Accents. Most of these take an argument -- the thing to accent # (\l and \L are handled as InsetLatexAccents, so they go here too) my $AccentTokens = "\\\\[`'^#~=.bcdHklLrtuv\"]"; # Environments which describe justifying (converted to LyX \align commands) # and the corresponding LyX commands my %AlignEnvironments = ( "center" => "\n\\align center \n", "flushright" => "\n\\align right \n", "flushleft" => "\n\\align left \n", # Some environments' begin commands take an extra argument # Print string followed by arg for each item in the list, or ignore the arg ("") my %ExtraArgEnvironments = ( "thebibliography" => "", "lyxlist" =>'\labelwidthstring ', "labeling" =>'\labelwidthstring ', # koma script list # Math environments are copied verbatim my $MathEnvironments = "(math|equation|displaymath|eqnarray(\\*)?)"; # ListLayouts may have standard paragraphs nested inside them. my $ListLayouts = "Itemize|Enumerate|Description"; ##################### PARSER INVOCATION ################################## sub call_parser { # This subroutine calls the TeX parser & translator # Before it does that, it does lots of setup work to get ready for parsing. # Arg0 is the file to read (clean) LaTeX from # Arg1 is the file to write LyX to # Arg2 is the file to read layouts from (e.g., in LYX_DIR/layouts/foo.layout) my ($InFileName, $OutFileName) = (shift,shift); # Before anything else, set the package-wide variables based on the # user-given flags # opt_d is set to 1 if '-d' option given, else (probably) undefined $debug_on = (defined($main::opt_d) && $main::opt_d); # Hash of tokens passed to the TeX parser # Many values are $Text::TeX::Tokens{'\operatorname'}, which has # Type=>report_args and count=>1 # Note that we don't have to bother putting in tokens which will be simply # translated (e.g., from %TextTokenTransTable). my %MyTokens = ( '{' => $Text::TeX::Tokens{'{'}, '}' => $Text::TeX::Tokens{'}'}, '\begin' => $Text::TeX::Tokens{'\begin'}, '\end' => $Text::TeX::Tokens{'\end'}, # Lots of other commands will be made by ReadCommands:Merge # by reading the LaTeX syntax file # Font sizing commands (local) '\tiny' => {Type => 'local'}, '\small' => {Type => 'local'}, '\scriptsize' => {Type => 'local'}, '\footnotesize' => {Type => 'local'}, '\small' => {Type => 'local'}, '\normalsize' => {Type => 'local'}, '\large' => {Type => 'local'}, '\Large' => {Type => 'local'}, '\LARGE' => {Type => 'local'}, '\huge' => {Type => 'local'}, '\Huge' => {Type => 'local'}, # Tokens to ignore (which make a new paragraph) # Just pretend they actually ARE new paragraph markers! '\maketitle' => {'class' => 'Text::TeX::Paragraph'}, ); # Now add to MyTokens all of the commands that were read from the # commands file by package ReadCommands &ReadCommands::Merge(\%MyTokens); # Here's the actual subroutine. The above is all preparation # Output LyX file my $zzz = $debug_on ? " ($InFileName --> $OutFileName)\n" : "... "; print STDERR "Translating$zzz"; open (OUTFILE,">$OutFileName"); # Open the file to turn into LyX. my $infile = new Text::TeX::OpenFile $InFileName, 'defaultact' => \&basic_lyx, 'tokens' => \%MyTokens; # Process what's left of the file (everything from \begin{document}) $infile->process; # Last line of the LyX file print OUTFILE "\n\\the_end\n"; close OUTFILE; #warn "Done with basic translation\n"; return; } # end subroutine call_parser ########################## MAIN TRANSLATOR SUBROUTINE ##################### sub basic_lyx { # This subroutine is called by Text::TeX::process each time subroutine # eat returns a value. # Argument 0 is the return value from subroutine eat # Argument 1 is the Text::TeX::OpenFile (namely, $TeXfile) my $eaten = shift; my $fileobject = shift; # This handles most but maybe not all comments # THere shouldn't be any if we've run CleanTeX.pl print "Comment: ",$eaten->comment if defined $eaten->comment && $debug_on; my $type = ref($eaten); print "$type " if $debug_on; # This loop is basically just a switch. However, making it a for # (1) makes $_ = $type (convenient) # (2) allows us to use things like next and last TYPESW: for ($type) { # some pre-case work s/^Text::TeX:://o or die "unknown token?!"; my ($dummy, $tok); my ($thistable); # The parser puts whitespace before certain kinds of tokens along # with that token. If that happens, save a space my $pre_space = ""; # whitespace before a token if (/BegArgsToken|^Token|::Group$/) { $dummy = $eaten->exact_print; # Only set prespace if we match something # We wouldn't want it to be more than one space, since that's # illegal in LyX. Also, replace \t or \n with ' ' since they are # ignored in LyX. Hopefully, this won't lead to anything worse # than some lines with >80 chars # Finally, don't put a space at the beginning of a new paragraph if (($dummy =~ /^\s+/) && !$IsNewParagraph) { $pre_space = " "; } # Handle blank lines. if (m/^Paragraph$/o) { # $INP <>0 means We will need a new layout command $IsNewParagraph = 1; # $MBD means start a begin_deeper within list environments # unless there's an \item command $MayBeDeeper = 1; last TYPESW; } # If, e.g., there's just a comment in this token, don't do anything # This actually shouldn't happen if CleanTeX has already removed them last TYPESW if !defined $eaten->print; # Handle LaTeX tokens if (/^Token$/o) { my $name = $eaten->token_name; # name of the token, e.g., "\large" print "'$name' " if $debug_on; # Tokens which turn into a bit of LyX text if (exists $TextTokenTransTable{$name}) { &CheckForNewParagraph; #Start new paragraph if necessary my $to_print = $TextTokenTransTable{$name}; # \@ has to be specially handled, because it depends on # the character AFTER the \@ if ($name eq '\@') { my $next = $fileobject->eatGroup(1); my $ch=""; $ch = $next->print or warn "\@ confused me!\n"; if ($ch eq '.') { # Note: \@ CAN'T have pre_space before it print OUTFILE "$to_print$ch\n"; print "followed by $ch" if $debug_on; } else { warn "LyX (or LaTeX) can't handle '$ch' after $name\n"; print OUTFILE $ch; } } else { # it's not \@ # Print the translated text (include preceding whitespace) print OUTFILE "$pre_space$to_print"; } # end special handling for \@ # Handle tokens that LyX translates as a "LatexCommand" inset } elsif (grep {$_ eq $name} @LatexCommands) { &CheckForNewParagraph; #Start new paragraph if necessary print OUTFILE "$pre_space\n\\begin_inset LatexCommand ", $name, "\n\n\\end_inset \n\n"; # Math -- copy verbatim until you're done } elsif ($name eq '\(' || $name eq '\[') { print "\nCopying math beginning with '$name'\n" if $debug_on; # copy everything until end text $dummy = &Verbatim::copy_verbatim($fileobject, $eaten); $dummy = &fixmath($dummy); # convert '\sp' to '^', etc. &CheckForNewParagraph; # math could be first thing in a par print OUTFILE "$pre_space\n\\begin_inset Formula $name "; print $dummy if $debug_on; print OUTFILE $dummy; } elsif ($name eq '\)' || $name eq '\]') { # end math print OUTFILE "$name\n\\end_inset \n\n"; print "\nDone copying math ending with '$name'" if $debug_on; # Items in list environments } elsif ($name eq '\item') { # What if we had a nested "Standard" paragraph? # Then write \end_deeper to finish the standard layout # before we write the new \layout ListEnv command if ($$CurrentLayoutStack[-1] eq "Standard") { pop (@$CurrentLayoutStack); # take "Standard" off the stack print OUTFILE "\n\\end_deeper "; print "\nCurrent Layout Stack: @$CurrentLayoutStack" if $debug_on; } # end deeper if # Upcoming text (the item) will be a new paragraph, # requiring a new layout command based on whichever # kind of list environment we're in $IsNewParagraph = 1; # But since we had an \item command, DON'T nest a # deeper "Standard" paragraph in the list $MayBeDeeper = 0; # Check for an optional argument to \item # If so, within the [] we need to protect spaces # TODO: In fact, for description, if there's no [] or # there's an empty [], then we need to write a ~, since LyX # will otherwise make the next word the label # If it's NOT a description & has a [] then we're stuck! # They need to fix the bullets w/in lyx! if (($dummy = $fileobject->lookAheadToken) && ($dummy =~ /\s*\[/)) { $fileobject->eatFixedString('\['); # eat the [ $protect_spaces = 1; # Special lists (e.g. List layout) have to print something # before each item. In that case, CFNP and print it if ($item_preface) { &CheckForNewParagraph; print OUTFILE $item_preface; # Font sizing commands # (Other font commands are TT::BegArgsTokens because they take # arguments. Font sizing commands are 'local' TT::Tokens) } elsif (exists $FontTransTable{$name}) { my $command = $FontTransTable{$name}; #e.g., '\size large' if (! $IsNewParagraph) { print OUTFILE "$pre_space$command"; } #otherwise, wait until we've printed the new paragraph command # Store the current font change ($dummy = $command) =~ s/\s*(\S+)\s+(\w+)\s*/$1/; die "Font command error" if !exists $$CurrentFontStatus{$dummy}; push (@{$CurrentFontStatus->{$dummy}}, $2); print "\nCurrent $dummy Stack: @{$CurrentFontStatus->{$dummy}}" if $debug_on; # Table stuff } elsif ($name eq '&') { if ($thistable = &RelyxTable::in_table) { print OUTFILE "\n\\newline \n"; $thistable->nextcol; } else {warn "& is illegal outside a table!"} } elsif ($name eq '\\\\' || $name eq '\\newline') { &CheckForNewParagraph; # could be at beginning of par? print OUTFILE "\n\\newline \n"; # If we're in a table, \\ means add a row to the table # Note: if we're on the last row of the table, this extra # row will get deleted later. This hack is necessary, because # we don't know while reading when the last row is! if ($thistable = &RelyxTable::in_table) { $thistable->addrow; } elsif ($name eq '\hline') { if ($thistable = &RelyxTable::in_table) { # hcline does hline if no arg is given $thistable->hcline; } else {warn "\\hline is illegal outside a table!"} # Figures } elsif ($name =~ /^\\epsf[xy]size$/) { # We need to eat '=' followed by EITHER more text OR # one (or more?!) macros describing a TeX size my $arg = $fileobject->eatMultiToken; my $length = $arg->print; $length =~ s/^\s*=\s*// or warn "weird '$name' command!"; # If there's no "cm" or other letters in $length, the next token # ought to be something like \textwidth. Then it will be empty # or just have numbers in it. # This is bugprone. Hopefully not too many people use epsf! if ($length =~ /^[\d.]*\s*$/) { my $next = $fileobject->eatMultiToken; $length .= $next->print; $length =~ s/\s*$//; # may have \n at end # If we can't parse the command, print it in tex mode &RelyxFigure::parse_epsfsize($name, $length) or &print_tex_mode("$name=$length"); # Miscellaneous... } elsif ($name =~ /\\verb.*?/) { my $dummy = &Verbatim::copy_verb($fileobject, $eaten); print "\nCopying $name in TeX mode: " if $debug_on; &print_tex_mode ($dummy); # Otherwise it's an unknown token, which must be copied # in TeX mode, along with its arguments, if any } else { if (defined($eaten->relyx_args($fileobject))) { ©_latex_known($eaten, $fileobject); } else { # it's not in MyTokens ©_latex_unknown($eaten, $fileobject); } last TYPESW; } # Handle tokens that take arguments, like \section{},\section*{} if (/^BegArgsToken$/) { my $name = $eaten->token_name; print "$name" if $debug_on; # Handle things that LyX translates as a "LatexCommand" inset if (grep {$_ eq $name} @LatexCommands) { &CheckForNewParagraph; #Start new paragraph if necessary print OUTFILE "$pre_space\n\\begin_inset LatexCommand "; # \bibliography gets handled as a LatexCommand inset, but # it's a special case, cuz LyX syntax expects "\BibTeX" # instead of "\bibliography" (I have no idea why), and because # we have to print extra stuff # Because we might not have encountered the # \bibliographystyle command yet, we write # "insert bibstyle here", and replace that string # with the actual bibliographystyle argument in # LastLyX (i.e., the next pass through the file) if ($name eq "\\bibliography") { print OUTFILE "\\BibTeX[", $bibstyle_insert_string, "]"; } else { print OUTFILE "$name"; # \cite takes an optional argument, e.g. my $args = $eaten->relyx_args ($fileobject); while ($args =~ s/^o//) { my $tok = $fileobject->eatOptionalArgument; my $dummy = $tok->exact_print; print OUTFILE $dummy; print OUTFILE "\{"; last TYPESW; # skip to the end of the switch } if (grep {$_ eq $name} @IncludeCommands) { &CheckForNewParagraph; #Start new paragraph if necessary print OUTFILE "$pre_space\n$Begin_Inset_Include $name\{"; last TYPESW; # skip to the end of the switch } # This is to handle cases where _ is used, say, in a filename. # When _ is used in math mode, it'll be copied by the math mode # copying subs. Here we handle cases where it's used in non-math. # Examples are filenames for & citation labels. # (It's illegal to use it in regular LaTeX text.) if ($name eq "_") { print OUTFILE $eaten->exact_print; last TYPESW; } # Sectioning and Title environments (using a LyX \layout command) if (exists $ReadCommands::ToLayout->{$name}) { &ConvertToLayout($name); last TYPESW; #done translating # Font characteristics } elsif (exists $FontTransTable{$name}) { my $dum2; my $command = $FontTransTable{$name}; ($dummy, $dum2) = ($command =~ /(\S+)\s+(\w+)/); # HACK so that "\emph{hi \emph{bye}}" yields unemph'ed "bye" if ( ($dummy eq "\\emph") && ($CurrentFontStatus->{$dummy}->[-1] eq "on")) { $dum2 = "default"; # "on" instead of default? $command =~ s/on/default/; # If we're about to start a new paragraph, save writing # this command until *after* we write '\layout Standard' if (! $IsNewParagraph) { print OUTFILE "$pre_space$command"; # Store the current font change die "Font command error" if !exists $$CurrentFontStatus{$dummy}; push (@{$CurrentFontStatus->{$dummy}}, $dum2); # Handle footnotes and margin notes # Make a new font table & layout stack which will be local to the # footnote or marginpar } elsif (exists $FloatTransTable{$name}) { my $command = $FloatTransTable{$name}; # Open the footnote print OUTFILE "$pre_space$command"; # Make $CurrentFontStatus point to a new (anonymous) font table $CurrentFontStatus = { '\emph' => ["default"], '\family' => ["default"], '\series' => ["default"], '\shape' => ["default"], '\bar' => ["default"], '\size' => ["default"], '\noun' => ["default"], # And make $CurrentLayoutStack point to a new (anon.) stack $CurrentLayoutStack = ["Standard"]; # Store whether we're at the end of a paragraph or not # for when we get to end of footnote AND # Note that the footnote text will be starting a new paragraph # Also store the current alignment (justification) $OldINP = $IsNewParagraph; $OldMBD = $MayBeDeeper; $OldAlignment = $CurrentAlignment; $IsNewParagraph = 1; $MayBeDeeper = 0; #can't be deeper at beginning of footnote $CurrentAlignment = ""; # Accents } elsif ($name =~ m/^$AccentTokens$/) { &CheckForNewParagraph; # may be at the beginning of a par print OUTFILE "$pre_space\n",'\i ',$name,'{' # Included Postscript Figures # Currently, all postscript including commands take one # required argument and 0 to 2 optional args, so we can # clump them together in one else. } elsif (grep {$_ eq $name} @GraphicsCommands) { &CheckForNewParagraph; # may be at the beginning of a par my $arg1 = $fileobject->eatOptionalArgument; # arg2 is a token of an empty string for most commands my $arg2 = $fileobject->eatOptionalArgument; my $arg3 = $fileobject->eatRequiredArgument; my $save = $arg1->exact_print . $arg2->exact_print . $arg3->exact_print; # Parse and put figure into LyX file # Print it verbatim if we didn't parse correctly my $thisfig = new RelyxFigure::Figure; if ($thisfig->parse_pscommand($name, $arg1, $arg2, $arg3)) { print OUTFILE $thisfig->print_info; } else { &print_tex_mode($eaten->exact_print . $save); # Tables } elsif ($name eq "\\multicolumn") { if ($thistable = &RelyxTable::in_table) { # the (simple text) first arg. $dummy = $fileobject->eatRequiredArgument->contents->print; my $group = $fileobject->eatRequiredArgument; $thistable->multicolumn($dummy, $group); } else {warn "\\multicolumn is illegal outside a table!"} } elsif ($name eq '\cline') { if ($thistable = &RelyxTable::in_table) { # the (simple text) first arg. $dummy = $fileobject->eatRequiredArgument->contents->print; # sub hcline does cline if an arg is given $thistable->hcline($dummy); } else {warn "\\cline is illegal outside a table!"} # Bibliography } elsif ($name eq '\bibliographystyle') { $tok = $fileobject->eatRequiredArgument; $bibstyle_file = ""; # There may be >1 token in the {}, e.g. "{a_b}" -> 3 tokens my @toks = $tok->contents; foreach $tok (@toks) { # kludge: CleanTeX adds {} after _ $tok = $tok->contents if ref($tok) eq "Text::TeX::Group"; $bibstyle_file .= $tok->print; print "\nBibliography style file is $bibstyle_file"if $debug_on; # LyX \bibitem actually looks just like LaTeX bibitem, except # it's in a Bibliography par & there must be a space after the # bibitem command. Note we need to explicitly print the braces... } elsif ($name eq "\\bibitem") { $IsNewParagraph=1; # \bibitem always starts new par. in LyX &CheckForNewParagraph; $tok = $fileobject->eatOptionalArgument; print OUTFILE "$name ", $tok->exact_print, "{"; # Miscellaneous # ensuremath -- copy verbatim until you're done # but add \( and \) # Note that we'll only get here if the command is NOT in math mode } elsif ($name eq '\ensuremath') { print "\nCopying math beginning with '$name'\n" if $debug_on; my $tok = $fileobject->eatGroup; # eat math expression my $dummy = $tok->exact_print; $dummy =~ s/\{(.*)\}/$1/; $dummy = &fixmath($dummy); # convert '\sp' to '^', etc. &CheckForNewParagraph; # math could be first thing in a par print OUTFILE "$pre_space\n\\begin_inset Formula \\( "; print $dummy if $debug_on; print OUTFILE $dummy; # end math print OUTFILE "\\)\n\\end_inset \n\n"; print "\nDone copying math" if $debug_on; # Token in the ReadCommands command list that basic_lyx doesn't # know how to handle } else { ©_latex_known($eaten,$fileobject); } # end big if # Exit the switch last TYPESW; # ArgTokens appear when we've used eatRequiredArgument if (/^ArgToken$/) { # If we're copying a recognized but untranslatable token in tex mode my $tok = $tex_mode_tokens[-1] || 0; if ($eaten->base_token == $tok) { ©_latex_known($eaten,$fileobject); } last TYPESW; if (/^EndArgsToken$/) { # If we're copying a recognized but untranslatable token in tex mode my $tok = $tex_mode_tokens[-1] || 0; if ($eaten->base_token eq $tok) { ©_latex_known($eaten,$fileobject); last TYPESW; } my $name = $eaten->token_name; print "$name" if $debug_on; # Handle things that LyX translates as a "LatexCommand" inset # or "Include" insets if (grep {$_ eq $name} @LatexCommands, @IncludeCommands) { print OUTFILE "\}\n\n\\end_inset \n\n"; } elsif (exists $ReadCommands::ToLayout->{$name}) { &EndLayout($name); # Font characteristics # Pop the current FontStatus stack for a given characteristic # and give the new command (e.g., \emph default) } elsif (exists $FontTransTable{$name}) { my $command = $FontTransTable{$name}; ($dummy) = ($command =~ /(\S+)\s+\w+/); pop @{$CurrentFontStatus->{$dummy}}; $command = "\n$dummy $CurrentFontStatus->{$dummy}->[-1] \n"; print OUTFILE "$command"; # Footnotes and marginpars } elsif (exists $FloatTransTable{$name}) { print OUTFILE "\n\\end_float \n\n"; # Reset the layout stack and font status table pointers to # point to the global stack/table again, instead of the # footnote-specific stack/table $CurrentFontStatus = \%FontStatus; $CurrentLayoutStack = \@LayoutStack; # We need to reissue any font commands (but not layouts) foreach $dummy (keys %$CurrentFontStatus) { if ($CurrentFontStatus->{$dummy}->[-1] ne "default") { print OUTFILE $FontTransTable{$dummy}; } # Same paragraph status as we had before the footnote started $IsNewParagraph = $OldINP; $MayBeDeeper = $OldMBD; $CurrentAlignment = $OldAlignment; } elsif ($name =~ m/^$AccentTokens$/) { print OUTFILE "}\n"; } elsif ($name eq "\\bibitem") { print OUTFILE "}\n"; } # End if on $name # Exit main switch last TYPESW; } # end if EndArgsToken # Handle END of scope of local commands like \large if (/^EndLocal$/) { my $name = $eaten->token_name; #cmd we're ending, e.g.,\large print $name if $debug_on; if (exists $FontTransTable{$name}) { my $command = $FontTransTable{$name}; ($dummy = $command) =~ s/\s*(\S*)\s+(\w+)\s*/$1/; #e.g., '\size' die "Font command error" if !exists $$CurrentFontStatus{$dummy}; # TT::OF->check_presynthetic returns local commands FIFO! # So pop font stack, but warn if we pop the wrong thing warn " font confusion?" if pop @{$CurrentFontStatus->{$dummy}} ne $2; print "\nCurrent $dummy Stack: @{$CurrentFontStatus->{$dummy}}" if $debug_on; my $newfont = $CurrentFontStatus->{$dummy}->[-1]; $command = "\n$dummy $newfont\n"; print OUTFILE "$command"; } else { warn "Unknown EndLocal token!\n"; } last TYPESW; # We don't print { or }, but we make sure that the spacing is correct # Handle '{' if (/^Begin::Group$/) { print OUTFILE "$pre_space"; last TYPESW; # Handle '{' if (/^End::Group$/) { print OUTFILE "$pre_space"; last TYPESW; # Handle \begin{foo} if (/^Begin::Group::Args$/) { print $eaten->print," " if $debug_on; # the string "\begin{foo}" my $env = $eaten->environment; # Any environment found in the layouts files if (exists $ReadCommands::ToLayout->{$env}) { &ConvertToLayout($env); # Some environments have an extra argument. In that case, # print the \layout command (cuz these environments always # start new pars). Then either print the extra arg or # ignore it (depending on the environment). if (exists $ExtraArgEnvironments{$env}) { # Should be just one token in the arg. my $arg = $fileobject->eatBalanced->contents->print; if ($ExtraArgEnvironments{$env}) { #print it print "\nArgument $arg to $env environment" if $debug_on; $item_preface = $ExtraArgEnvironments{$env} . $arg."\n"; } else { #ignore it print "\nIgnoring argument '$arg' to $env environment" if $debug_on; } } # end if for reading extra args to \begin command # Math environments } elsif ($env =~ /^$MathEnvironments$/o) { &CheckForNewParagraph; # may be beginning of paragraph my $begin_text = $eaten->print; print "\nCopying math beginning with '$begin_text'\n" if $debug_on; print OUTFILE "\n\\begin_inset Formula $begin_text "; $dummy = &Verbatim::copy_verbatim($fileobject, $eaten); $dummy = &fixmath($dummy); # convert '\sp' to '^', etc. print $dummy if $debug_on; print OUTFILE $dummy; # Alignment environments } elsif (exists $AlignEnvironments{$env}) { # Set it to the command which creates this alignment $CurrentAlignment = $AlignEnvironments{$env}; ($dummy) = ($CurrentAlignment =~ /\S+\s+(\w+)/); print "\nNow $dummy-aligning text " if $debug_on; # alignment environments automatically start a new paragraph $IsNewParagraph = 1; # Environments lyx translates to floats } elsif (exists $FloatEnvTransTable{$env}) { $tok = $fileobject->eatOptionalArgument; if ($tok && defined ($dummy = $tok->print) && $dummy) { print "\nIgnoring float placement '$dummy'" if $debug_on; my $command = $FloatEnvTransTable{$env}; # Open the footnote print OUTFILE "$command"; # table } elsif ($env =~ /^tabular$/) { # don't allow tabular* or ctabular # Table must start a new paragraph $IsNewParagraph = 1; $MayBeDeeper = 1; # We want to print table stuff *after* a \layout Standard &CheckForNewParagraph; # Since table info needs to come *before* the table content, # put a line in the output file saying that the *next* # reLyX pass needs to put the table info there print OUTFILE "\n$RelyxTable::TableBeginString\n"; # Read and ignore an optional argument [t] or [b] $tok = $fileobject->eatOptionalArgument; if ($tok && defined ($dummy = $tok->print) && $dummy) { print "\nIgnoring positioning arg '$dummy'" if $debug_on; # Read the argument into a TT::Group # (that group may contain groups, e.g. for {clp{10cm}} $tok = $fileobject->eatGroup; new RelyxTable::Table $tok; # \begin document } elsif ($env eq "document") { # do nothing #print "\nStarting to translate actual document" if $debug_on; # Special environments to copy as regular text (-r option). # Do this by copying the \begin & \end command in TeX mode # (\Q\E around $env allows *'s in environment names!) } elsif (grep /^\Q$env\E$/, @ReadCommands::regular_env) { print "\nCopying $env environment as regular text\n" if $debug_on; $dummy = $eaten->print; # \begin{env}, ignore initial whitespace &print_tex_mode($dummy); # otherwise, it's an unknown environment # In that case, copy everything up to the \end{env} # Save stuff in global tex_mode_string so we can print it # when we read & handle the \end{env} } else { print "\nUnknown environment $env" if $debug_on; $tex_mode_string = ""; # print "\begin{env} # For reLyXskip env, don't print the \begin & \end commands! $tex_mode_string .= $eaten->exact_print unless $env eq "reLyXskip"; $tex_mode_string .=&Verbatim::copy_verbatim($fileobject,$eaten); } last TYPESW; } # Handle \end{foo} if (/^End::Group::Args$/) { print $eaten->print," " if $debug_on; # the string "\end{foo}" my $env = $eaten->environment; # End of list or quote/verse environment # OR special environment given with -t option if (exists $ReadCommands::ToLayout->{$env}) { &EndLayout($env); $item_preface = ""; # reset when at end of List env. # End of math environments } elsif ($env =~ /^$MathEnvironments$/o) { print OUTFILE "\\end{$env}\n\\end_inset \n\n"; print "\nDone copying math environment '$env'" if $debug_on; } elsif (exists $AlignEnvironments{$env}) { # Back to block alignment $CurrentAlignment = ""; print "\nBack to block alignment" if $debug_on; # assume that \end should end a paragraph # This isn't correct LaTeX, but LyX can't align part of a par $IsNewParagraph = 1; # Environments lyx translates to floats } elsif (exists $FloatEnvTransTable{$env}) { print OUTFILE "\n\\end_float \n\n"; # table } elsif ($env =~ /tabular$/) { # don't allow tabular* if ($thistable = &RelyxTable::in_table) { $thistable->done_reading; print OUTFILE "\n$RelyxTable::TableEndString\n"; } else {warn "found \\end{tabular} when not in table!"} # Anything after a table will be a new paragraph $IsNewParagraph = 1; $MayBeDeeper = 1; } elsif ($env eq "document") { print "\nDone with document!" if $debug_on; # "regular" environment given with -r option } elsif (grep /^\Q$env\E$/, @ReadCommands::regular_env) { $dummy = $eaten->print; # \end{env}, ignore initial whitespace &print_tex_mode($dummy); # Next stuff will be new env. $IsNewParagraph = 1; # End of unknown environments. We're already in TeX mode } else { # Add \end{env} (including initial whitespace) to string # For reLyXskip environment, don't print \begin & \end commands! $tex_mode_string .= $eaten->exact_print unless $env eq "reLyXskip"; # Now print it &print_tex_mode($tex_mode_string); print "Done copying unknown environment '$env'" if $debug_on; } last TYPESW; } # Note for text handling: we have to do lots of stuff to handle # spaces in (as close as possible to) the same way that LaTeX does # LaTeX considers all whitespace to be the same, so basically, we # convert each clump of whitespace to one space. Unfortunately, there # are special cases, like whitespace at the beginning/end of a par, # which we have to get rid of to avoid extra spaces in the LyX display. # \n at the end of a paragraph must be considered like a space, # because the next line might begin with a token like \LyX. But # if the next line starts with \begin, say, then an extra space will be # generated in the LyX file. Oh well. It doesn't affect the dvi file. if (/^Text$/) { my $outstr = $eaten->print; # the actual text # don't bother printing whitespace # Note: this avoids the problem of extra whitespace generating # extra Text::TeX::Paragraphs, which would generate extra # \layout commands last TYPESW if $outstr =~ /^\s+$/; # whitespace at beginning of a paragraph is meaningless # e.g. \begin{foo}\n hello \end{foo} shouldn't print the \n # (Note: check IsNewParagraph BEFORE calling &CFNP, which zeros it) my $replace = $IsNewParagraph ? "" : " "; $outstr =~ s/^\s+/$replace/; # Only write '\layout Standard' once per paragraph &CheckForNewParagraph; # \n\n signals end of paragraph, so get rid of it (and any space # before it) $outstr =~ s/\s*\n\n$//; # Print the LaTeX text to STDOUT print "'$outstr'" if $debug_on; # LyX *ignores* \n and \t, whereas LaTeX considers them just # like a space. # Also, many spaces are equivalent to one space in LaTeX # (But LyX misleadingly displays them on screen, so get rid of them) $outstr =~ s/\s+/ /g; # protect spaces in an optional argument if necessary # Put a SPACE after the argument for List, Description layouts if ($protect_spaces) { $dummy = $TextTokenTransTable{'~'}; # This will not handle brackets in braces! if ($outstr =~ /\]/) { # protect spaces only *until* the bracket my $tempstr = $`; my $tempstr2 = $'; # Note that any \t's have been changed to space already $tempstr =~ s/ /$dummy/g; # Print 1 space after the argument (which finished with ]) # Don't print 2 (i.e. remove leading space from $tempstr2) # don't print the bracket $tempstr2 =~ s/^ //; $outstr = "$tempstr $tempstr2"; $protect_spaces = 0; # Done with optional argument } else { # protect all spaces, since we're inside brackets $outstr =~ s/ /$dummy/g; } # end special stuff for protected spaces # Translate any LaTeX text that requires special LyX handling foreach $dummy (keys %TextTransTable) { $outstr =~ s/\Q$dummy\E/$TextTransTable{$dummy}/g; } # "pretty-print" the string. It's not perfect, since there may # be text in the OUTFILE before $outstr, but it will keep from # having REALLY long lines. # Try to use approximately the same word-wrapping as LyX does: # - before space after a period, except at end of string # - before first space after column seventy-one # - after 80'th column while (1) { $outstr =~ s/\. (?!$)/.\n / or $outstr =~ s/(.{71,79}?) /$1\n / or $outstr =~ s/(.{80})(.)/$1\n$2/ or last; # exit loop if string is < 79 characters } # Actually print the text print OUTFILE "$outstr"; last TYPESW; } # end TT::Text handling # The default action - this should never happen! print("I don't know ",$eaten->print) if $debug_on; } # end for ($type) print "\n" if $debug_on; } #end sub basic_lyx ######################### TEX MODE SUBROUTINES ######################### # This subroutine copies and prints a latex token and its arguments if any. # This sub is only needed if the command was not found in the syntax file # Use exact_print to preserve, e.g., whitespace after macros sub copy_latex_unknown { my $eaten = shift; my $fileobject = shift; my $outstr = $eaten->exact_print; my ($dummy, $tok, $count); # Copy the actual word. Copy while you've still got # arguments. Assume all args must be in the same paragraph # (There could be new paragraphs *within* args) # We can't use copy_verbatim (unless we make it smarter) because # it would choke on nested braces print "\nUnknown token: '",$eaten->print,"': Copying in TeX mode\n" if $debug_on; my $dum2; while (($dum2 = $fileobject->lookAheadToken) && ($dum2 =~ /^[[{]$/)) { if ($dum2 eq '[') { #copy optional argument - assume it's simple $tok = $fileobject->eatOptionalArgument; $outstr .= $tok->exact_print; # also print brackets & whitespace } else { $count = 0; EAT: { #copied from eatBalanced, but allow paragraphs die unless defined ($tok = $fileobject->eatMultiToken); $outstr.="\n",redo EAT if ref($tok) eq "Text::TeX::Paragraph"; $dummy = $tok->exact_print; $outstr .= $dummy; # Sometimes, token will be '\n{', e.g. $count++ if $dummy =~ /^\s*\{$/; # add a layer of nesting $count-- if $dummy =~ /^\s*\}$/; # end one layer of nesting redo EAT if $count; #don't dump out until all done nesting } #end EAT block } # end if $dummy = [{ } #end while # Add {} after macro if it's followed by '}'. Otherwise, {\foo}bar # will yield \foobar when LyX creates LaTeX files $outstr.="{}" if $outstr=~/\\[a-zA-Z]+$/ && $dum2 eq '}'; # Print it out in TeX mode &print_tex_mode($outstr); print "\nDone copying unknown token" if $debug_on; } # end sub copy_latex_unknown # Copy an untranslatable latex command whose syntax we know, along with its # arguments # The command itself, optional arguments, and untranslatable # arguments get copied in TeX mode. However, arguments which contain regular # LaTeX will get translated by reLyX. Do that by printing what you have so # far in TeX mode, leaving this subroutine, continuing with regular reLyX # translating, and then returning here when you reach the ArgToken or # EndArgsToken at the end of the translatable argument. # We need to keep a stack of the tokens that brought us here, because # you might have nested commands (e.g., \mbox{hello \fbox{there} how are you} sub copy_latex_known { my ($eaten, $fileobject) = (shift,shift); my $type = ref($eaten); $type =~ s/^Text::TeX::// or die "unknown token?!"; # token itself for TT::Token, TT::BegArgsToken, # Corresponding BegArgsToken for ArgToken,EndArgsToken my $temp_start = $eaten->base_token; # Initialize tex mode copying if ($type eq "BegArgsToken" or $type eq "Token") { print "\nCopying untranslatable token '",$eaten->print, "' in TeX mode" if $debug_on; push @tex_mode_tokens, $temp_start; # initialize the string of stuff we're copying $tex_mode_string = $eaten->exact_print; } # Start tex copying? # Handle arguments # This token's next arguments -- returns a string matching /o*[rR]?/ my $curr_args = $eaten->next_args($fileobject); if ($type eq "EndArgsToken" or $type eq "ArgToken") { # Print ending '}' for the group we just finished reading $tex_mode_string .= '}'; } # If there could be optional arguments next, copy them while ($curr_args =~ s/^o// && $fileobject->lookAheadToken eq '[') { my $opt = $fileobject->eatOptionalArgument; $tex_mode_string .= $opt->exact_print; } $curr_args =~ s/^o*//; # Some OptArgs may not have appeared if ($type eq "BegArgsToken" or $type eq "ArgToken") { # Print beginning '{' for the group we're about to read $tex_mode_string .= '{'; } # Now copy the next required argument, if any # Copy it verbatim (r), or translate it as regular LaTeX (R)? if ($curr_args =~ s/^r//) { my $group = $fileobject->eatRequiredArgument; my $temp = $group->exact_print; # Remove braces. They're put in explicitly $temp =~ s/\{(.*)\}/$1/; # .* is greedy $tex_mode_string .= $temp; } elsif ($curr_args =~ s/^R//) { print "\n" if $debug_on; &print_tex_mode($tex_mode_string); $tex_mode_string = ""; print "\nTranslating this argument for ",$temp_start->print, " as regular LaTeX" if $debug_on; } else { # anything but '' is weird warn "weird arg $curr_args to ",$temp_start->print,"\n" if $curr_args; } # Finished tex mode copying if ($type eq "Token" or $type eq "EndArgsToken") { # Add {} to plain tokens followed by { or }. Otherwise {\foo}bar # and \foo{bar} yield \foobar in the LaTeX files created by LyX my $dummy; if ($type eq "Token" and $dummy=$fileobject->lookAheadToken and $dummy =~ /[{}]/) $tex_mode_string .= '{}'; # Print out the string print "\n" if $debug_on; &print_tex_mode($tex_mode_string); $tex_mode_string = ""; # We're done with this token pop(@tex_mode_tokens); my $i = $type eq "Token" ? "" : " and its arguments"; my $j = $temp_start->print; print "\nDone copying untranslatable token '$j'$i in TeX mode" if $debug_on; } # end tex copying? } # end sub copy_latex_known # Print a string in LyX "TeX mode" # The goal of this subroutine is to create a block of LyX which will be # translated exactly back to the original when LyX creates its temporary LaTeX # file prior to creating a dvi file. # Don't print \n\n at the end of the string... instead just set the new # paragraph flag. Also, don't print whitespace at the beginning of the string. # Print nothing if it's the beginning of a paragraph, or space otherwise. # These two things avoid extra C-Enter's in the LyX file sub print_tex_mode { my $outstr = shift; print "'$outstr'" if $debug_on; # Handle extra \n's (& spaces) at beginning & end of string my $str_ends_par = ($outstr =~ s/\n{2,}$//); if ($IsNewParagraph) { $outstr =~ s/^\s+//; # .e.g, $outstr follows '\begin{quote}' } else { # Any whitespace is equivalent to one space in LaTeX $outstr =~ s/^\s+/ /; # e.g. $outstr follows "\LaTeX{}" or "Hi{}" } # Check whether string came right at the beginning of a new paragraph # This *might* not be necessary. Probably can't hurt. &CheckForNewParagraph; # Get into TeX mode print OUTFILE "$start_tex_mode"; # Do TeX mode translation; $outstr =~ s/\\/\n\\backslash /g; # don't translate \n in '\n\backslash' that we just made! $outstr =~ s/\n(?!\\backslash)/\n\\newline \n/g; # Print the actual token + arguments if any print OUTFILE $outstr; # Get OUT of LaTeX mode (and end nesting if nec.) print OUTFILE "$end_tex_mode"; $IsNewParagraph = $str_ends_par; return; } # end sub print_tex_mode ############################ LAYOUT SUBROUTINES ########################### sub CheckForNewParagraph { # This subroutine makes sure we only write \layout command once per paragraph # It's mostly necessary cuz 'Standard' layout is the default in LaTeX; # there is no command which officially starts a standard environment # If we're in a table, new layouts aren't allowed, so just return # If $IsNewParagraph is 0, it does nothing # If $INP==1, It starts a new paragraph # If $CurrentAlignment is set, it prints the alignment command for this par. # If $MayBeDeeper==1 and we're currently within a list environment, # it starts a "deeper" Standard paragraph my $dummy; my $layout = $$CurrentLayoutStack[-1]; return if &RelyxTable::in_table; if ($IsNewParagraph) { # Handle standard text within a list environment specially if ($MayBeDeeper) { if ($layout =~ /^$ListLayouts$/o) { push (@$CurrentLayoutStack, "Standard"); print "\nCurrent Layout Stack: @$CurrentLayoutStack\n" if $debug_on; print OUTFILE "\n\\begin_deeper "; $layout = "Standard"; } $MayBeDeeper = 0; # Don't test again until new paragraph # Print layout command itself print OUTFILE "\n\\layout $layout\n\n"; print OUTFILE $CurrentAlignment if $CurrentAlignment; # Now that we've written the command, it's no longer a new paragraph $IsNewParagraph = 0; # And we're no longer waiting to see if this paragraph is empty $PendingLayout = 0; # When you write a new paragraph, reprint any font commands foreach $dummy (keys %$CurrentFontStatus) { my $currf = $CurrentFontStatus->{$dummy}->[-1]; if ($currf ne "default") { print OUTFILE "\n$dummy $currf \n"; } } # end if $INP } # end sub CheckForNewParagraph sub ConvertToLayout { # This subroutine begins a new layout, pushing onto the layout stack, nesting # if necessary. It doesn't actually write the \layout command -- that's # done by CheckForNewParagraph. # The subroutine assumes that it's being passed an environment name or macro # which is known and which creates a known layout # It uses the ToLayout hash (created by the ReadCommands module) which # gives the LyX layout for a given LaTeX command or environment # Arg0 is the environment or macro my $name = shift; my $layoutref = $ReadCommands::ToLayout->{$name}; my $layout = $layoutref->{'layout'}; my $keepempty = $layoutref->{'keepempty'}; my $dummy = ($name =~ /^\\/ ? "macro" : "environment"); print "\nChanging $dummy $name to layout $layout" if $debug_on; # Nest if the layout stack has more than just "Standard" in it if ($#{$CurrentLayoutStack} > 0) { # Die here for sections & things that can't be nested! print " Nesting!" if $debug_on; print OUTFILE "\n\\begin_deeper "; } # If we still haven't printed the *previous* \layout command because that # environment is empty, print it now! (This happens if an environment # is nested inside a keepempty, like slide.) &CheckForNewParagraph if $PendingLayout; # Put the new layout onto the layout stack push @$CurrentLayoutStack, $layout; print "\nCurrent Layout Stack: @$CurrentLayoutStack" if $debug_on; # Upcoming text will be new paragraph, needing a new layout cmd $IsNewParagraph = 1; # Test for nested "Standard" paragraph in upcoming text? # Some environments can nest. Sections & Title commands can't $MayBeDeeper = $layoutref->{"nestable"}; # We haven't yet read any printable stuff in the new paragraph # If this is a layout that's allowed to be empty, prepare for an # empty paragraph $PendingLayout = $keepempty; } # end sub ConvertToLayout sub EndLayout { # This subroutine ends a layout, popping the layout stack, etc. # The subroutine assumes that it's being passed an environment name or macro # which is known and which creates a known layout # It uses the ToLayout hash (created by the ReadCommands module) which # gives the LyX layout for a given LaTeX command or environment # Arg0 is the environment or macro my $name = shift; my $layoutref = $ReadCommands::ToLayout->{$name}; my $layout = $layoutref->{'layout'}; my $dummy = ($name =~ /^\\/ ? "macro" : "environment"); print "\nEnding $dummy $name (layout $layout)" if $debug_on; # If we still haven't printed the *previous* \layout command because that # environment is empty, print it now! Before we pop the stack! # This happens for a totally empty, non-nesting environment, # like hollywood.sty's fadein &CheckForNewParagraph if $PendingLayout; my $mylayout = pop (@$CurrentLayoutStack); # If a standard paragraph was the last thing in a list, then # we need to end_deeper and then pop the actual list layout # This should only happen if the Standard layout was nested # in a nestable layout. We don't check. if ($mylayout eq "Standard") { print OUTFILE "\n\\end_deeper "; print " End Standard Nesting!" if $debug_on; $mylayout = pop (@$CurrentLayoutStack); } # The layout we popped off the stack had better match the # environment (or macro) we're ending! if ($mylayout ne $layout) { die "Problem with Layout Stack!\n"}; print "\nCurrent Layout Stack: @$CurrentLayoutStack" if $debug_on; # If we're finishing a nested layout, we need to end_deeper # This should only happen if the layout was nested # in a nestable layout. We don't check. # Note that if we're nested in a list environment and the # NEXT paragraph is Standard, then we'll have an extra # \end_deeper \begin_deeper in the LyX file. It's sloppy # but it works, and LyX will get rid of it when it # resaves the file. if ($#{$CurrentLayoutStack} > 0) { print " End Nesting!" if $debug_on; print OUTFILE "\n\\end_deeper "; } # Upcoming text will be new paragraph, needing a new layout cmd $IsNewParagraph = 1; # Test for nested "Standard" paragraph in upcoming text? # Some environments can nest. Sections & Title commands can't $MayBeDeeper = $layoutref->{"nestable"}; } # end sub EndLayout ####################### MISCELLANEOUS SUBROUTINES ########################### sub fixmath { # Translate math commands LyX doesn't support into commands it does support my $input = shift; my $output = ""; while ($input =~ s/ (.*?) # non-token matter ($1) (\\ # token ($2) is a backslash followed by ... ( ([^A-Za-z] \*?) | # non-letter (and *) ($4) OR ([A-Za-z]+ \*?) ) # letters (and *) ($5) )//xs) # /x to allow whitespace/comments, /s to copy \n's { $output .= $1; my $tok = $2; if (exists $ReadCommands::math_trans{$tok}) { $tok = $ReadCommands::math_trans{$tok}; # add ' ' in case we had, e.g., \|a, which would become \Verta # Only need to do it in those special cases $tok .= ' ' if defined $4 && $tok =~ /[A-Za-z]$/ && $input =~ /^[A-Za-z]/; $output .= $tok; } $output .= $input; # copy what's left in $input return $output; 1; # return true to calling subroutine