Advanced System products, Inc
	ABP5xx OS/2 2.x 3.0  ADD device driver installation      12/3/94
	==============================================

	A:
	ABP5xx OS/2 2.x 3.0 device driver installation diskette including 3 files:
	PRABP5xx.DDP  -- presence check script file
	PRABP5xx.EXE  -- presence check executable file
	ABP5xx.ADD    -- OS/2 2.x 3.0 device driver for ABP5xx SCSI adapter

	B: If Install device driver to an empty drive, please see B-1,
	   If Install device driver to an OS/2 2.x 3.0 drive, please see B-2,

	B-1:
	Install ABP5xx.ADD device driver from CD-ROM on ABP5xx adapter:
	   1. Have OS/2 Version 2.x 3.0 CD-ROM installation kit ready, include
		  a. IBM OS/2 2.x 3.0 installtion diskette 
		  b. IBM OS/2 2.x 3.0 diskette1             
		  c. IBM OS/2 2.x 3.0 CD-ROM               
	   2. Copy ABP5xx.ADD to the root direcory of diskette1.
	      There is not enough disk space on this diskette, you should
	      delete the other drivers such as aha152x.add, aha154x.add so
	      there will be enough space for ABP5xx.ADD.
	   3. Use editor to add a line "BASEDEV=ABP5xx.ADD" to the
		  config.sys file on diskette1.
	   4. Insert installation diskette to drive A:
		  Insert CD-ROM to CD-ROM drive,
		  and follow the IBM OS/2 installation instructions.

	B-2:
	Install ABP5xx.ADD device driver to an existing OS/2 2.x 3.0 drive:
	   1. Boot up existing OS/2
	   2. Insert diskette to A: drive
	   3. Click icon "OS/2 system - System setup - Device Driver Install"
	   4. Change Source directory to A:
	   5. Change Destination directory to where the OS/2 reside
	   6. click install
	   OS/2 will interprete PRABP5xx.DDP script and run PRABP5xx.EXE
	   to check if ABP5xx adapter present, if it present, OS/2 will add
	   a line "	BASEDEV=ABP5xx.ADD" to config.sys to finsish installation.



       Note: On OS/2 2.11 and 3.0 some of the *.ADD driver files can trash
	     our adapter board.  Please comment out the *.ADD files on config.sys
	     except IBM*.ADD files.