Data aktualizacji: 01.05.1999
Information on the displays
back next
contents
Display 10: Values of paging repeat period, TMSI and periodic
location update timer, AFC and AGC
++++++++++++++
+TMSIaaaaaaaa+
+T321:bbb/ccc+
+PRP:d ee ff+
+ ggggg hhh +
++++++++++++++
- aaaaaaaa --- is TMSI value in hex format
- bbb --- Current value of T3212 counter (range is 000 - 'ccc'), where 1 means 6 min time.
So, if this value is 2 less than 'ccc' then next periodic location updating will be made
within 2*6 min = 12 minutes.
- ccc --- Timeout value of T3212 counter (range is 000-240, where 1 means 6 min time
between location updates and 240 means 240*6 min = 24h between location updates. 000 means
that periodic location update is not in use). This value is received from the network.
- d --- Value of paging repeat (range is 2-9, when paging is in every second multiframe,
mobile takes more current that if it were in every 9th multiframe).
- ee --- Downlink signalling failure value. If value is negative, 0 shown. Maximum value
is 45. When mobile is on TCH then xx is shown.
- ff --- Gain value on TCH/SDCCH, range is 0 to 93
- ggggg --- VCTCXO AFC DAC control, range is -1024 to 1023
- hhh --- serving cell channel number
back next
contents
© Copyright 1999 by KACYKO All rights reserved.