Scanning Images
- Run VueScan
- Insert image into scanner
- Set "Input|Media type"
- Press "Preview" button
- Adjust crop box with mouse
- Press "Scan" button
If the colors don't look quite right in
the preview, try clicking with the right mouse
button (with control key on Mac OS) on an area
of the image that should be gray.
To reset to the automatic color balance setting,
double-click on the image with the right mouse
button (with control key on Mac OS).
If the lighting in the scene is unusual (i.e.
at sunset or with stage lighting), try setting
"Color|Color balance" to "Neutral".
Using Scanner as Copier
\item Run VueScan
\item Set "Input|Scan task" to "Copy to printer"
\item Set "Input|Media type"
\item Set "Input|Media size"
\item Insert image into scanner
\item Press "Scan" button
\item Repeat from step 5
Working with Scanned Images
VueScan is designed to save scanned images to JPEG files
(by default) or TIFF files (optionally).
You can configure your favorite image editing program to
automatically open each image when a scan completes. Use the
"Prefs|External viewer" option to control this.
On Mac OS X, you can set up the default viewer for .tif and .jpg files by:
- click once on a .tif or .jpg file
- choose "File|Show info"
- choose "Open with application"
- pick the application you want to use
- press the "Change All" button
On Mac OS 9, the file type and file creator for the .tif,
.jpg, and .bmp files are determined by the "Prefs|Viewer"
option.
On Windows, you can set up the program that automatically
starts with scanned images by setting up a file association
for .tif and .jpg files. To create a file association, click
on a .tif or .jpg file with the right mouse button,
select "Open with", then "Choose program". Pick the program
you want to use, and also select "Always use the
selected program to open this kind of file".
On Linux, use the "Prefs|Viewer" option to select the
application to use to view .tif and .jpg files.
Note that VueScan's technique for saving scans to a file
uses half as much memory as when using a TWAIN interface
or a Photoshop Import Filter. Since VueScan is designed
to work with very large, high-resolution images, it doesn't
include a TWAIN interface or Photoshop Import Filter.
(You need to turn on the "Prefs|Release memory" option
to release all image memory prior to sending the scan
to the image viewer.)
Note also that VueScan's technique for saving scans to a file
allows you to edit an image while simultaneously scanning the
next image. Since some scans can take between 5 and 10 minutes,
this results in significantly higher productivity than when
using a TWAIN interface or a Photoshop Import Filter.
Scanning Roll of Film
If you're scanning many frames from the same roll of film,
the following procedure will optimally set the CCD
exposure and film base color (i.e. mask color):
- Set "Input|More options" to "All"
- Set "Input|Media type"
- Insert film with most transparent area
- If "Input|Lock exposure" visible
- Clear "Input|Lock exposure"
- Press "Preview" button
- Adjust cropping if necessary
- If "Input|Lock exposure" visible
- Set "Input|Lock exposure"
- Press "Preview" button
- If "Input|Lock film base color" visible
- Set "Input|Lock film base color"
Batch Scanning
To scan multiple images in a batch, set "Input|Batch scan"
to "All" to scan all frames in a device, or set it to "List"
and type in the list of frames (i.e. "4 3 1" for frames 4,
3 and 1, in that order).
More Information
For more information, refer to the
VueScan User's Guide.
General Scanning Resources |
You can often find answers to common scanning questions by
searching the archives of the comp.periphs.scanners newsgroup with
groups.google.com.
You can also discuss scanning techniques, problems and
workarounds with other experienced scanner users in this newsgroup.
There's an excellent web site with
scanning tips
maintained by Wayne Fulton. It contains a scanning tips for
flatbed scanners
and
film scanners.
There's also a summary of the
available film scanners
, a
review of VueScan
and an example of using VueScan's
cleaning, intensity, and contrast options.
Changes from Previous Versions |
What's new in version 7.6.46
- Fixed problem with Scan Dual III banding
- Fixed problem with adjusting crop box corners
- Fixed problem with Neutral color balance
What's new in version 7.6.45
- Fixed problem with variable exposure on Epson scanners
- Fixed problem with HP 7400C when using USB
- Fixed problem with some Microtek scanners
- Fixed problem with button size on Mac OS X
What's new in version 7.6.44
- Fixed problem with using mouse for color balance
- Fixed problem Epson Perfection 660
- Added Epson film holder dimensions to User's Guide
What's new in version 7.6.43
- Fixed problem with single-click on image
- Fixed problem with Home/End keys
- Some improvement to display refresh speed
- Slightly increased default value of "Crop|Buffer (%)"
What's new in version 7.6.42
- Clicking with mouse creates a new crop box
- Clicking with Shift key moves crop box
- Clicking with Option (Alt) key shows previous image
- Fixed problem grabbing corners of crop box
- Fixed problem changing raw scan files while running
- Fixed problem with Canon FB620S
- Added hourglass during display refresh
- Improved calibration on Avision USB scanners
- Default cropping of raw files is whole image
- Several ease-of-use improvements
What's new in version 7.6.41
- Added Home/End/PageUp/PageDown for controlling frame number
- Added lamp control for UMAX Astra 6400 and Astra 1220S V1.5
- Fixed problem with some .CRW and .NEF raw digital camera files
- Several ease-of-use improvements
What's new in version 7.6.40
- Added "Input|Scan task" option
- Several ease-of-use improvements
What's new in version 7.6.39
- Added "Rotate L" and "Rotate R" buttons
- Added "Image|Mirror" command
- Numerous ease-of-use improvements
- Changed some option names for clarity
What's new in version 7.6.38
- Added support for printer ICC calibration
- Improved accuracy of color space conversions
- Fixed problem with reading Fuji S2 .RAF files
- Fixed problem with reading Nikon D1X .NEF files
What's new in version 7.6.37
- Improved ICC calibration accuracy
- Added support for ICC calibration of negative film
- Added support for 50 types of raw digital camera files
- Improved color correction of negative film
- Changed Firewire Epson scanners to display US product name
- "Files|Raw compresson" controls 16-bit raw compression
- Added "Device|Exposure clipping (%)" option
What's new in version 7.6.36
- Fixed problem with HP ScanJet IIcx
- Fixed problem with compressed 16-bit raw scan files
- Reset frame number to 1 when Eject button pressed
- Increased max number of raw scan files from 1024 to 9999
What's new in version 7.6.35
- Fixed problem with Scan Dual III and USB 2.0
- Fixed problem with with writing invalid ICC files
- Improved color correction for most scanners
- Improved ICC calibration
- Added "Color|Scanner ICC description" option
What's new in version 7.6.34
- Improved infrared cleaning
- Improved raw scan file compression (for some scanners)
- Improved descreening
- Added "Device|Descreen dpi" option
What's new in version 7.6.33
- Fixed problem with always writing crop files in 24-bit format
- Added support for lamp control on UMAX 2100S and 2200
- Reduced watermarking in trial version
What's new in version 7.6.32
- Added "Device|Media size" option
- Added "Device|Auto lamp off" option for:
- Most Microtek scanners
- Canon FS4000
- Epson 1250/1260
- Umax 3400/5400
- Added 1600 dpi on Microtek ScanMaker 9800XL
- Added 1800 dpi on Microtek ArtixScan 1800f
- Added 2400 dpi on Microtek ScanMaker 6700/6800
- Fixed problem with unnecessary previews
What's new in version 7.6.31
- Added support for 16-bit samples on Minolta Scan Dual III
- Added support for Epson CX-3200, CX-5200 and CC-700
- Fixed problem with Microtek ScanMaker IV
- Fixed problem with "Prefs|Refresh fast" option
What's new in version 7.6.30
- Fixed problem with Canon FS4000 infrared cleaning
- Fixed problem with ScanWit 2740S infrared cleaning
- Fixed problem with color balance
What's new in version 7.6.29
- Improved IT8 calibration (correct for color balance)
- Fixed problem with Epson 2450 and USB on Mac OS X
- Fixed problem starting up when some SCSI devices busy
- Added "Prefs|Enable raw from disk" option
What's new in version 7.6.28
- Added diagnostic message if IT8 image misaligned
- Added "Prefs|Clear before scan" option (set by default)
- Fixed problem with long startup with Epson 2450 on Mac OS X
- Fixed problem showing density with control key on Mac OS 9/X
What's new in version 7.6.27
- Fixed problem with some Epson scanners
- Fixed problem with Minolta Scan Dual III
- Fixed problem with SprintScan 120
What's new in version 7.6.26
- Increased scanning speed with Minolta Scan Dual III
- Increased scanning speed with Canon N-series and LIDE
What's new in version 7.6.25
- Fixed problem with Canon LIDE black/white scanning
- Fixed problem with Minolta Scan Dual II
What's new in version 7.6.24
- Fixed problem with Minolta Scan Dual III
- Improved color with Canon N-series and LIDE scanners
- Improved color with Epson 1250/1260
- Improved color with UMAX 6400
- Improved color with HP 5300C/5370C
- Added support for Epson Perfection 660
What's new in version 7.6.23
- Increased scanning speed on many Epson scanners
- Increased range of "Color|Brightness" option
- Fixed crash when Monaco scanner profiles used
- Fixed small problem on Mac OS with text in lower left corner
What's new in version 7.6.22
- Updated number of days of free upgrades in "About" command
- Added Standard Edition options when in trial mode
- Fixed problem with ScanMaker X6
What's new in version 7.6.21
- Added lower cost Basic Edition
- Added Standard Edition and Professional Edition
What's new in version 7.6.20
- Added single-pass multi-scanning for SS120, SS4000+, ArtixScan 4000tf
- Fixed SprintScan 120 problem
- Fixed problem with writing 24-bit raw scan files
- Fixed problem with scanning negatives on HP 5370C
What's new in version 7.6.19
- Improved infrared cleaning, especially with Kodachrome
- Added capability to draw crop box outside current crop box
- Fixed SprintScan 120 problem
- Fixed Epson Firewire problem
- Fixed ScanMaker 35t problem
What's new in version 7.6.18
- Changed "Crop|Region" to "Crop|Preview area" (to make clearer)
- Added capability to set "Crop|Preview area" to "Crop box"
- Fixed problem using scanner ICC profiles with infrared cleaning
What's new in version 7.6.17
- Improved accuracy of ICC/IT8 calibration
- Added support for generating synthetic IT8 targets
- Added support for using IT8 targets without description file
- Changed generated ICC profiles from absolute to perceptual intent
- Fixed problem with calibration of some Microtek scanners
What's new in version 7.6.16
- Improved accuracy of ICC/IT8 calibration
- Added "Color|Scanner ICC linearize" option
- Added "Color|Scanner ICC gamma 2.2"
- Removed Image/Slide/Negative curve options
- Separated Mac OS 9 and Mac OS X downloads (smaller downloads)
What's new in version 7.6.15
- Added support for IT8 calibration and scanner ICC files
- Improved internal ICC profiles (better color accuracy)
What's new in version 7.6.14
- Improved color accuracy of "File|File color space"
- Fixed problem with Minolta Scan Dual III and USB 2.0
What's new in version 7.6.13
- Fixed problem with Minolta Scan Dual III and USB 2.0
- Fixed problem with some Epson document feeders
- Fixed text display problem on some older Mac OS 8/9 systems
- Increased display update speed (reduced "Prefs|Display res (Mpix)")
- Added lamp turn-off when exiting with UMAX Astra 2100S and 2200
- Updated Helpful Tips in User's Guide for multi-image flatbed scans
What's new in version 7.6.12
- Significantly improved infrared cleaning
- Improved preview speed on some Microtek scanners
- Fixed problem with three-pass Microtek scanners
- Fixed auto-focus problem on Canon FS2710
- Added "Prefs|Multi-thread scan" option
What's new in version 7.6.11
- Significantly improved infrared cleaning
- Fixed problem with older Microtek scanners
- Fixed problem with HP ScanJet 4P
- Fixed problem with Genius ColorPage-HR5
What's new in version 7.6.10
- Added support for QuatoGraphic x-finity ultra (Microtek 9800XL)
- Fixed problem with some Epson USB scanners on Mac OS X
- Fixed problem with cursor status not displaying in Scan window
- Fixed problem changing "Prefs|Option panel width"
- Changed crop box animation on Windows to previous style
What's new in version 7.6.9
- Added support for multiple VueScan users on Mac OS X
- Fixed problem with Epson 1640SU (GT-8700)
- Fixed problem with Epson ES-800C (GT-8000)
- Fixed problem with slow startup on some Epson USB scanners
- Fixed problem with AGFA DuoScan T2500
- Added display of crop box width/height when mouse down
- Added support for some UMAX Automatic Document Feeders
- Added status feedback when changing colors for display
- Improved visibility of crop box on Windows
What's new in version 7.6.8
- Added display of measurements when mouse moved over image
- Improved support for Microtek and Polaroid scanners
- Fixed problem with UMAX PowerLook III
- Fixed problem with status display when "Scan mode" changes
What's new in version 7.6.7
- Added "Files|Magnification (%)" option
- Added "Crop|Lock aspect ratio" option
- Added support for Microtek ArtixScan 4500t
- Added support for Polaroid SprintScan 45 Ultra
- Added "ECI RGB" color space
- Added "More options" to each tab
- Removed "Device|Option types"
- Fixed problem with some UMAX Astra 600S/610S scanners
What's new in version 7.6.6
- Added monitor/printer rendering intent option for color space conversions
- Fixed problem with Canon LIDE scanners not retracting after scan
- Fixed problem with B/W scans on Epson 1250/1260 and Canon D660
- Changed histogram aspect ratio from 4:3 to 5:3
What's new in version 7.6.5
- Added popup tips when mouse hovers over options
- Added "Prefs|Enable popup tips" option
- Fixed problem with Minolta USB 1.1 scanners on Windows
What's new in version 7.6.4
- Fixed problems with page setup and printer setup
- Fixed several user interface problems
- Upgraded to wxWindows 2.4.0 (user interface improvements)
What's new in version 7.6.3
- Improved grayscale scan speed 3x on Canon LIDE scanners
- Added "Auto" option for "Device|Bits per pixel"
- Improved infrared cleaning
- Removed serial number display from "Help|About"
What's new in version 7.6.2
- Added "Prefs|Single tab panel" option (larger image area)
- Added support for Microtek MTMA transparency adapter
- Added support for scanning to OmniPage on Mac OS X
- Fixed problem with "Color|Black point (%)"
- Fixed slow startup with some Circon scanners
- Fixed problem with Nikon LS-20/LS-1000 and Firewire->SCSI adapter
- Improved histograms to display with 2:3 aspect ratio
What's new in version 7.6.1
- Added support for Nikon LS-10
- Fixed problem with Minolta Scan Dual III
- Improved usability of "Prefs|Option panel width"
What's new in version 7.6
- Added Description and Copyright fields to Files tab
- Increased scan speed on some Epson scanners
- Changed a few options to display in basic mode
- Changed to only display "Device|Scan mode" when necessary
- Added button for selecting viewer on Windows
USB Flatbed scanners supported:
- All Epson models
- Canon FB620U, FB630U, FB636U, FB1210U, N650U, N656U, D660U, N670U, N676U, N1220U, N1240U, LIDE 20, LIDE 30
- HP 2100C, 2200C, 4100C, 5200C, 5300C, 6200C, 6300C, 7400C
- Microtek X12USL, 4700, 5600, 5700, 6700, 6800 (without ICE) and 8700
- UMAX 3400 (some versions), 5400
- Most Acer/BenQ, AGFA models
SCSI Flatbed scanners supported:
- All Epson, Canon, HP, Microtek, UMAX, Linotype-Hell (except Circon), Acer/BenQ, AGFA SnapScan models
- KYE ColorPage HR5
- Apple Color OneScanner 600, 1200/30
FireWire Scanners supported:
- All Epson, Microtek, UMAX, Linotype-Hell models
- Nikon LS-4000, LS-8000
- Polaroid SprintScan 120, 4000+
- Minolta Scan Elite II, Scan Multi Pro
USB Film Scanners supported:
- Nikon CoolScan IV (LS-40)
- Canon FS4000
- Minolta Scan Dual II, Scan Dual III, Scan Elite II
- HP PhotoSmart S20 (Windows only)
SCSI Film Scanners supported:
- Nikon LS-10, LS-20, LS-1000, LS-30, LS-2000
- Minolta QuickScan 35, Scan Dual, Scan Multi, Scan Multi Pro, Scan Speed, Scan Elite
- Canon FS2700, FS2710, FS4000
- HP PhotoSmart
- Acer/BenQ ScanWit 2720S, 2740S
- Polaroid SprintScan 120, 4000, 35, 35/LE, 35+, 45
- Epson FilmScan 200
- Konica Qscan
- Kodak RFS 2035, RFS 2035 Plus, RFS 3570
Unsupported scanners:
- All parallel-port models
- All multifunction units (printer+scanner)
- Canon FS2720, D1230, D1250, D2400, 5000F, 8000F, 9900F, LIDE 50
- All UMAX USB models except 3400 (some versions) and 5400
- All Microtek USB models except X12USL, 4700, 5600, 5700, 6700, 6800, 8700
- HP 3300, 3400, 3500, 4200, 4300, 4400, 4500, 5400 and 5500
- Kodak RFS 3600, Kodak RFS 3570 Plus
- AGFA SnapScan Touch
- All Lexmark, Artec, Mustek, PIE, Primax, Brother, Visioneer models
Please note that these scanners are unsupported for several reasons:
- Parallel port scanners are unsupported because the commands
they use are undocumented by the vendors, are extremely complex
and are difficult to reverse engineer.
- Most other unsupported scanners are parallel-port scanners
internally, with an internal USB-parallel converter.
- The Canon FS2720 is unsupported because it uses a complex
USB-SCSI converter internally and requires complex firmware downloads.
- The other Canon scanners aren't supported because Canon won't
document the commands they use, and these commands are too
complex to reverse-engineer.
Supported Digital Camera Raw Files |
VueScan has preliminary support for raw scan files for the
digital cameras in the following list. However, note that
the colors will only be accurate if you use an IT8 camera
target (like the one produced by Wolf Faust) and if you
use VueScan's "Profile|Profile scanner" command to create
an ICC file for your camera.
Future versions of VueScan will include built-in support
for color correction for these files. If you have a
raw scan file of an IT8 target from one of these cameras,
please send e-mail to support@hamrick.com with a description of how
to obtain the raw scan file (or attach it if it's less
than 2 MBytes).
- Canon PowerShot 600
- Canon PowerShot A5
- Canon PowerShot A50
- Canon PowerShot Pro70
- Canon PowerShot Pro90 IS
- Canon PowerShot G1
- Canon PowerShot G2
- Canon PowerShot G3
- Canon PowerShot S30
- Canon PowerShot S40
- Canon PowerShot S45
- Canon PowerShot S50
- Canon EOS D30
- Canon EOS D60
- Canon EOS 10D
- Nikon D1
- Nikon D1H
- Nikon D1X
- Nikon D100
- Nikon E950*
- Nikon E990*
- Nikon E995*
- Nikon E2500*
- Nikon E4300*
- Nikon E4500*
- Nikon E5000
- Nikon E5700
- Olympus E-10
- Olympus E-20
- Olympus C5050Z
- Minolta DiMAGE 5 (untested)
- Minolta DiMAGE 7 (untested)
- Minolta DiMAGE 7i
- Fuji FinePixS2Pro
- Kodak DCS315C
- Kodak DCS330C
- Kodak DCS420
- Kodak DCS460
- Kodak DCS460A
- Kodak EOSDCS3B
- Kodak EOSDCS1
- Kodak DCS720X
- Kodak DCS760C
- Kodak DCS760M
- Kodak ProBack
- Kodak PB645C
- Kodak PB645H
- Kodak PB645M
- Kodak DCS Pro 14n
- Sigma SD9
*There is a
program available
that will enable raw files on these Nikon digital cameras.
You can share one copy of VueScan among multiple Mac OS X users
by putting the VueScan folder into a read-only folder somewhere
on the hard drive. This will cause the default folder for each
user to be that user's "Pictures" folder. You can share a single
serial number among all users on a Mac OS X system by running
VueScan as root and entering the serial number into the
"About" dialog box.
If VueScan doesn't see your scanner on Mac OS X, first make
sure that Apple System Profiler can see the scanner. If it
doesn't, try powering off the computer, powering off the scanner,
powering on the scanner and then powering on the computer.
If you've installed the Canon software for N-series or LIDE
scanners, you need to use the "System Preferences" "Login Items",
select the ButtonManager for your scanner and press the Remove button.
If you're using an Epson 2400/2450 on Mac OS X, use the
Firewire cable if you have problems with long startup times
with USB.
Canon N-series and LIDE scanners are powered directly by the USB port.
The USB port must provide a power supply of 500 mA. If you plug
the scanner into the USB port on a keyboard or other USB device,
the scanner may not work properly. Attach the scanner directly
to a USB port on the computer or to a 500 mA self-powered USB hub.
If you find that an N-series or LIDE scanner doesn't work with one of
your USB ports, try plugging it into the other USB port.
If you're using Mac OS X 10.0.4 or 10.1 with a SCSI scanner, you may need to
download newer Mac OS X SCSI drivers
Don't install this driver on Mac OS X 10.2 or later, since this can cause
kernel crashes.
The driver for the beige G3 built-in SCSI has bugs on Mac OS X 10.1
which have been fixed in 10.2. The driver for the beige G3 built-in
SCSI is included with Mac OS X.
If you don't have a SCSI interface on your Macintosh, many users
have reported success using VueScan with the
Belkin
FireWire/SCSI Adapter on Mac OS 9.x, 10.1 and 10.2.
If you've installed the beta UMAX OS X scanner software, you'll need
to remove the extensions it installed in order to use VueScan.
These are stored in /System/Library/Extensions. To temporarily
remove them, just rename the .kext file to .kext.save.
If you're using a Microtech FireSCSI adapter, make sure that
you're using SCSI ID 0 and that the SCSI termination is correct.
If you're using an Orange Micro 906F SCSI card, make sure it's
upgraded to at least firmware version F1.35.
If your scanner has a button on the front and
if a program starts up when you press this button
while running VueScan, you need to disable this
behavior to get VueScan to work properly.
To disable button polling on Epson scanners,
use "Epson Scanner Monitor Setup" in the Apple
menu (uncheck "Enable monitoring") or remove
the "Epson Scanner Monitor" extension in Mac OS 9.
If VueScan doesn't see your scanner on Mac OS 9, first make
sure that Apple System Profiler can see the scanner. If it
doesn't, try powering off the computer, powering off the scanner,
powering on the scanner and then powering on the computer.
Canon N-series and LIDE scanners are powered directly by the USB port.
The USB port must provide a power supply of 500 mA. If you plug
the scanner into the USB port on a keyboard or other USB device,
the scanner may not work properly. Attach the scanner directly
to a USB port on the computer or to a 500 mA self-powered USB hub.
If you find that an N-series or LIDE scanner doesn't work with one of
your USB ports, try plugging it into the other USB port.
If you don't have a SCSI interface on your Macintosh, many users
have reported success using VueScan with the
Belkin
FireWire/SCSI Adapter on Mac OS 9.x, 10.1 and 10.2.
If you're using a Firewire or USB scanner on Mac OS 9.x, you may need
to remove the extensions installed by the scanner vendor's
software into the system folder. For instance, to get the Nikon
LS-4000 to work with Mac OS 9.x, remove all the extensions that
begin with the word "Nikon" (make sure you reboot with a film
holder inserted into the scanner).
To get the Minolta Scan Elite II to work on Mac OS 9.x, you'll need to
remove the following extensions. The extensions for the
Scan Multi II are similar.
- DS Elite Library
- MCM Library
- MCM Library DS
- MFSBaseLib2887
- MFSFWDriver
- MFSFWExpLoader
- MFSFWFamily
- MFSLib2887
To get a Umax Firewire scanner to work on Mac OS 9.x, you'll need to
remove the PL3FWIO extension.
If you're using a Microtech FireSCSI adapter, make sure that
you're using SCSI ID 0 and that the SCSI termination is correct.
If you're using an Orange Micro 906F SCSI card, make sure it's
upgraded to at least firmware version F1.35.
If your scanner has a button on the front and
if a program starts up when you press this button
while running VueScan, you need to disable this
behavior to get VueScan to work properly.
To disable button polling on Epson scanners,
use "Epson Scanner Monitor Setup" in the Apple
menu (uncheck "Enable monitoring") or remove
the "Epson Scanner Monitor" extension in Mac OS 9.
Several users have reported problems with some
versions of the Kaleidoscope extension on
Mac OS 9. Removing this extension will
solve the problem.
If you've set up a shortcut to vuescan.exe and are having
problems, try double-clicking c:\vuescan\vuescan.exe directly.
This will test whether the problem is with the way the shortcut
was set up or whether the problem is with VueScan.
If your scanner has a button on the front and
if a program starts up when you press this button
while running VueScan, you have a program running
in the background that you need to stop. To stop
this program, press control-alt-delete, choose the
task manager and use it to stop this program. One
example of this is the Epson Status Monitor.
VueScan works on Windows 95/98/ME/NT/2K/XP, and works with
all known SCSI cards. It also works fine with
multiple computers on a single SCSI bus (i.e. dual
ported access to scanners).
If you're using Windows 2000 or Windows XP and a SCSI scanner and
if VueScan doesn't find your SCSI scanner, you may need to
download and install ASPI
(you don't need this for USB scanners):
If VueScan won't start and you have Logitech MouseWare
or a Logitech keyboard installed, try stopping
EM_EXEC.EXE and/or ITOUCH.EXE. There have been some
reports of these two programs causing problems with
VueScan. (These two Logitech programs cause problems
for many other Windows programs as well.) Alternatively,
try turning off the "Smart Move" option in MouseWare.
If you have an ELSA Synergy III graphics card (or possibly
other NVideo graphics cards) and VueScan hangs when
starting, you may need to disable the Desktop Manager
that comes with the card (the file that causes the problem is
nvdesk32.dll).
On Linux, run vuescan from any directory.
Your serial number will be stored in ".vuescanrc"
in your home directory.
If you're using Red Hat Linux 8.0 or later, you may need
to set up the the environment variable LANG to C. For
instance, to run VueScan with this set, type:
env LANG=C vuescan
You need to make sure all of the /dev/sg* devices are
read/write accessible. To see what scanners are available,
type "cat /proc/scsi/scsi".
Note that the Adaptec AVA-1505 SCSI card doesn't
work with a Nikon film scanner, and will cause a
hard bus hang if you use VueScan with it. This
is due to a bug in the aha152x driver. Another bug
in this driver causes junk to be appended to the
end of a raw scan when using the PhotoSmart. Other
SCSI cards seem to work fine with VueScan on Linux.
There have also been problems reported with the
Adaptec AVA-2904E and the Canon FS2710, although
this combination works fine on Windows.
If you want to add or remove scsi devices without
rebooting your system, use the following commands:
echo "scsi add-single-device 0 0 ? 0" > /proc/scsi/scsi
echo "scsi remove-single-device 0 0 ? 0" > /proc/scsi/scsi
(use the SCSI ID in place of "?" above)
To use USB scanners on Linux, you need to load the
scanner driver and specify the vendor ID and product ID
of the scanner. For instance, to recognize the Canon N670U, use
"modprobe scanner vendor=0x04a9 product=0x220d". Then type
"cat /proc/bus/usb/devices" and make sure "Driver=usbscanner"
is enabled for your scanner.
If you're using Linux 2.4.12 or later, you don't need
to do anything special to have the scanner auto-recognized.
If you're using an earler version of Linux with a USB
scanner, set up the SCANNER0 environment variable to point
to /dev/usbscanner or /dev/usb/scanner (it needs to be
read/write accessible), set up the SCANVID0 environment
variable with the USB Vendor ID (VID) and set up the
SCANPID0 environment variable with the USB Product ID (PID).
You can support up to 8 USB scanners at a time by using
SCANNER1, SCANNER2, SCANVID1, SCANVID2, etc.
Some VID/PID pairs for scanners that VueScan supports are:
VID PID Scanner
---- ---- ---------------------------
03f0 0101 HP 4100
03f0 0201 HP 6200
03f0 0401 HP 5200
03f0 0505 HP 2100
03f0 0601 HP 6300
03f0 0605 HP 2200
0400 1000 BearPaw 1200
0400 1001 BearPaw 2400
0458 2007 ColorPage-HR6
0458 2008 Genius ???
0458 2009 Genius ???
0458 2013 Genius ???
0458 2015 Genius ???
0458 2016 Genius ???
04a5 any Acer/BenQ scanners
04a9 2201 Canon FB320U
04a9 2202 Canon FB620U
04a9 2205 Canon FB1210U
04a9 2206 Canon N650U
04a9 2207 Canon N1220U
04a9 2208 Canon D660U
04a9 220d Canon N670U / LIDE 20
04a9 220e Canon N1240U / LIDE 30
04a9 3042 Canon FS4000US
04b0 4000 Nikon CoolScan IV (LS-40)
04b8 0101 Epson Perfection 636 (GT-7000)
04b8 0102 Epson GT-2200 (GT-2200)
04b8 0103 Epson Perfection 610 (GT-6600)
04b8 0104 Epson Perfection 1200 (GT-7600)
04b8 0105 Epson StylusScan 2000
04b8 0106 Epson StylusScan 2500
04b8 0107 Epson Expression 1600 (ES-2000)
04b8 0108 Epson CC-700
04b8 0109 Epson Expression 1640XL (ES-8500)
04b8 010a Epson Perfection 1640 (GT-8700)
04b8 010b Epson Perfection 1240 (GT-7700)
04b8 010c Epson Perfection 640 (GT-6700)
04b8 010e Epson Expression 1680 (ES-2200)
04b8 010f Epson Perfection 1250 (GT-7200)
04b8 0110 Epson Perfection 1650 (GT-8200)
04b8 0111 Epson Perfection 2450 (GT-9700)
04b8 0112 Epson Perfection 2450 (GT-9700)
04b8 011a Epson 1000 ICS
04b8 011b Epson Perfection 2400 (GT-9300)
04b8 011c Epson Perfection 3200 (GT-9800)
04b8 011d Epson Perfection 1260 (GT-7300)
04b8 011e Epson Perfection 1660 (GT-8300)
04b8 0801 Epson CX-5200 (CC-600PX)
04b8 0802 Epson CX-3200 (CC-570L)
0638 026a Minolta Scan Dual II
0686 400d Minolta Scan Dual III
06bd 2061 AGFA SnapScan 1212U
06bd 0100 AGFA SnapScan Touch (not supported)
06bd any other AGFA scanners
07b3 0005 Plustek ??
07b3 0007 Plustek ??
07b3 000f Plustek ??
07b3 0010 Plustek U12
07b3 0011 Plustek U24
07b3 0012 Plustek ??
07b3 0013 Plustek ??
07b3 0014 Plustek A3
07b3 0015 Plustek U24
07b3 0016 Plustek ??
07b3 0017 Plustek ??
1606 0060 Umax 3400
1606 0160 Umax 5400
For instance, to set up VueScan for the Epson 640, use
the following commands if you're using csh:
setenv SCANNER0 /dev/usbscanner
setenv SCANVID0 04b8
setenv SCANPID0 010c
or if you're using sh or bash:
export SCANNER0="/dev/usbscanner"
export SCANVID0="04b8"
export SCANPID0="010c"
Note that you don't need to set up these environment variables
on newer Linux kernels.
If you're having problems with USB timeouts (i.e. with
the Nikon CoolScan IV (LS-40), make sure you use the
"usb-uhci" (CONFIG_USB_UHCI) module instead of the
alternate "uhci" (CONFIG_UHCI_ALT) module. You might also
increase the kernel usb timeout value (CONFIG_USB_LONG_TIMEOUT=y).
To remove VueScan, delete the entire directory.
There are no files installed elsewhere on the
system.
THIS SOFTWARE AND ACCOMPANYING DOCUMENTATION (INCLUDING
INSTRUCTIONS FOR USE) ARE PROVIDED "AS IS" WITHOUT WARRANTY
OF ANY KIND, FURTHER, HAMRICK SOFTWARE DOES NOT WARRANT,
GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE,
OR THE RESULTS OF USE, OF THE SOFTWARE OR DOCUMENTATION
IN TERMS OF CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS,
OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS AND
PERFORMANCE OF THE SOFTWARE IS ASSUMED BY YOU. IF THE
SOFTWARE OR WRITTEN MATERIALS ARE DEFECTIVE, YOU, AND NOT
HAMRICK SOFTWARE OR ITS DEALERS, DISTRIBUTORS, AGENTS, OR
EMPLOYEES, ASSUME THE ENTIRE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
HAMRICK SOFTWARE DISCLAIMS ALL OTHER WARRANTIES, EITHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, THAT IS MADE BY HAMRICK SOFTWARE,
ON THIS HAMRICK SOFTWARE PRODUCT. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY HAMRICK SOFTWARE, ITS
DEALERS, DISTRIBUTORS, AGENTS OR EMPLOYEES SHALL CREATE
A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS
WARRANTY AND YOU MAY NOT RELY ON ANY SUCH INFORMATION OR
ADVICE. YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE
TO STATE.
NEITHER HAMRICK SOFTWARE NOR ANYONE ELSE WHO HAS BEEN
INVOLVED IN THE CREATION, PRODUCTION OR DELIVERY OF THIS
PRODUCT SHALL BE LIABLE FOR ANY DIRECT, INDIRECT,
CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING DAMAGES FOR
LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF
BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE
OR INABILITY TO USE SUCH PRODUCT EVEN IF HAMRICK SOFTWARE
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Copyright © 2003 Hamrick Software
Last updated: June 2, 2003