For WINDOWS users on Artisoft Lantastic Networks

Before running NETTALK, go into Windows Setup
via the Windows Control Panel.

Then FOR NETWORK TYPE Select Artisoft Lantastic

(either 3.x or 4.x depending on your version
of Lantastic).

You will need the Windows disks 1 or 2 to
perform this task.


--------------------------------------------------------

FOR LANTASTIC - When encountering the problem of "Cannot add
Netbios names - Name already in use."

Edit STARTNET.BAT

If the line AILANBIO is followed by @filename then you are
using a configuration file. Changes should be made to this
file. Otherwise, the changes go into STARTNET.BAT.

if changing STARTNET.BAT add:

     AILANBIO VERBOSE
     PAUSE

if changing a configuration file, add the line:

     VERBOSE

     Then reboot or run STARTNET

     (AILANBIO will display its current config)

     Write down the number following

     MAX_NAMES=

     Now change STARTNET.BAT to:

     AILANIO MAX_NAMES=X

     Or add a line to the configuration file:

     MAX_NAMES=X

     (X=original setting number +3, i.e., 6+3=9, for a total

     of 9 Netbios names)

     (remove PAUSE line from STARTNET.BAT)

     Then reboot or run STARTNET

     and try LANTSR again.