1	Installation
2	Registration Diskette
3	Please run the product disk installation
4	There is insufficient memory to run the Install.  Please close one or more applications and run Install again.
5	Not enough memory to complete the installation.  Please close one or more applications and run Install again.
6	Installation Complete!
7	Install Interrupted!
8	Are you sure you want to exit the Installation?
9	Are you sure you want to exit %s Installation?
10	Install is unable to create the sub-directory '%'.\nPlease choose a different directory, or check your hard disk for available space.
11	Install is unable to create the parent directory '%'.\nPlease choose a different directory, or check your hard disk for available space.
12	Please enter a valid directory name, with drive letter and full path.  Example: C:\CA
13	An error occurred while copying file %. The file may be in use, you may be out of hard disk space, or you may not have write access.
14	The application program you selected is bad.  Please correct it then run install again.
15	Install: File % missing.
16	Size of installation files exceed the available disk space. Continue?
17	To install %s, enter a new path below or click Continue to install into the default directory.
19	Cannot write to your registration file.  Ensure that the write-protect switch (or tab) is OFF.
20	Subdirectory '%' must have read and write access.
21	File '%' must have read and write access.
22	%s Installation
23	Bad ISC File
24	Bad KEY File
25	'%' not found.
26	Ensure that the write-protect switch (or tab) is OFF.
27	Error writing to .INI file.
28	Please verify that the %s is in drive %c.  Click OK to continue, or Cancel to change disk location.
29	Error !
30	Warning !
31	CA-Multiple Products
32	Version 4.40
33	Copyright 1990-1998 Computer Associates Intl.  All rights reserved.
34	108510
35	Not for Resale - For Demonstration Purposes Only
36	For Educational Use Only
37	Do you want to create a permanent install directory on your hard disk?
38	To create a permanent install directory for %s, enter a new path below or click Continue to install into the default directory.
39	Copied %s to %s.
40	Decompressed and copied %s to %s.
41	Created directory %s.
42	***** Log file of %d-%d-%d %02d:%02d *****
43	Installed %s to %s.
44	Install Program Auto Execute
45	Create Workplace Objects?
46	Install Objects
47	No parent directory specified in ISC file.
48	Cannot change to drive %.
49	Cannot change directory to %.
50	Cannot set environment strings.
51	Cannot run program : %.
52	This is the recommended method for installation.  Everything necessary will be installed.
53	This method is for experienced users.  You can use this method to set up the application to suit your preference.
54	Size of installation files (%ldK) exceed the available disk space (%ldK). Continue?
55	All Basic Components Installed
56	Unicenter Install Help
57	Install files for %s into the following directory, which it will create on your hard disk. 
58	If you want to install the files into a different directory and/or drive, type the name of the directory in the space below. Click Continue to begin the installation.
59	Please enter a new path below or click Continue to create a directory to put common CA tools.
60	Can't write data to file %s.
61	Can't open initialization file %s.
62	Create Workplace Objects for %s?
63	Error copying file.
64	The file %s is read-only. Copy file anyway?
65	%s is not installed. Continue with installation of next product?
66	Installation is finished but may not be complete. Reinstallation may be required at a later date.
67	Cannot open file: %.
68	A bad parameter was passed to the installer. Stop installation?
69	CA-Install 4.40 for 32-Bit Windows
70	Installer could not set up a license. The product may not run.
71	Information
72	A hardware plug is required to install and run the product. If you have not already done so please make sure that a hardware plug is present on the parallel port.
73	Error occurred while decompressing file.
74	Time Stamp: %s  %s
75	Version Stamp: %u.%u.%u.%u
76	Software\ComputerAssociates
77	Environment
78	Software
79	Software\Classes
80	This product requires Windows 3.1 or greater to install and run.
81	This product requires Win32s.  Do you want to install Win32s now?
82	Upgrade Windows
83	Win32s Installation Disk 1
84	\Start Menu\Programs
85	EVAL
86	Installation is complete but the product may not run properly because some files were not copied.  Reinstallation may be required at a later date.
87	No products were selected to be installed.  Exiting...
88	Setup complete.\n\nReboot system now to complete installation?
89	Reboot System?
90	File %s is in use by the system.  You need administrator privledges to overwrite this file.
91	Not all files could be copied!  Run %s to copy files at a later time.
92	System\CurrentControlSet\Control\Session Manager\Environment
93	Setup complete. Please reboot your system to complete installation.
94	A group has fewer files than specified in the install script.  Exiting...
95	File %s is in use by another application.  Close applications and press RETRY, press IGNORE to go to the next file, or press ABORT to stop installation.
96	File %s is in use by another application.  Add to list of files to copy later?
3000	You have to type in your name to continue.
3001	No memory.  Please terminate some of your application programs and run install again.
3002	System Error: Bad Signature Command in ISC file.
3003	Internal Error.
3004	Cannot open file: %.
3005	Installation of this product could not complete because prerequisite products are not installed.
3006	The application program that you have selected could not be found.  Make sure that you have the correct version and have provided the directory where your application resides.
3007	Cannot allocate memory for decompression.
3008	File corrupted, failed to decompress.
3009	Please enter product ID into both fields.
3010	The product ID you entered is invalid.
3011	Cannot open response file.
3012	Error reading the response file.
3013	Cannot open log file.
3014	Cannot open product log file.
3015	Cannot load Exit List processor.
3016	Initialization failed.
3017	Failed to create main window.
3018	Error reading or interpreting the script file.
3019	New group in old group.  Line % in [files] section.
3020	File count mismatch.  Line % in [files] section.
3021	Files need 'R', 'D' or 'T' flag.  Line % in [files] section.
3022	Installation program can't communicate with Program Manager.  No program group is created.  You should create it manually.
3023	Script Error - Improper Version Flags.
3024	Script Error - No Opcode in Version Checking.
3025	Script Error - Bad Opcode in Version Checking.
3026	Script Error - No Operand in Version Checking.
3027	Script Error - Bad Operand in Version Checking.
3028	Unable to upgrade.  Verify that you are installing the same product that exists in your target directory.
3029	Cannot open log file.
3030	Error in the script. Source file name is required.
3031	CRC validation failed while decompressing %s. Please select retry to try again, ignore to go to next file or abort to stop installation.
3032	Unable to upgrade an Evaluation product.
3033	Unable to load CAIN4SHL.DLL.  Desktop objects and icons may not be set up.
3034	License data required for each product.  CA-Install terminating.
3035	CA-Install already running.  This program terminating.
3036	Script Error - Destination Directory for file (%) not in Directories section.
3037	**** File %s not installed because it is in use.
3038	**** File %s not installed because of user selection.
3039	**** File %s not installed because user doesn't have sufficient priviledge to overwrite file.
3040	**** File %s not installed because of flag setting.
3041	**** File %s not installed because it has the same date as previous version.
4000	Install is unable to read file from your disk.  Please correct the problem and press RETRY to resume or CANCEL to abort.