Fun 'N Games(tm) and (c) 1995 Williams Entertainment Inc. PC CD-ROM version 1.03 Installation and Setup 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 Fun 'N Games runs directly from your CD-ROM drive. Information about your configuration will be saved on your hard drive in the C:\FUNGAMES.CD directory. The manual states that you can disable the save directory. That is incorrect. The save directory will always be created when you first run Fun 'N Games. To play Fun 'N Games, first change to your CD-ROM drive. Then type 'fun' and press the Enter key. If this is the first time you have run Fun 'N Games, the setup menu will appear. Use the arrow keys and the Enter key to navigate through the menus. Your current selections are listed in the blue Configuration Summary window on the right side of the screen. Be sure to carefully check your sound and music options. To change your configuration later, run 'setup' from your CD-ROM drive. Refer to the Fun 'N Games manual for more information on the setup program. Memory 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 Fun 'N Games uses a DOS extender which merges all available memory into one region to maximize performance. You need to have 3 Meg of available EMS or XMS memory to play Fun 'N Games. A computer with a total of 8 Meg should easily be able to be configured to leave 3 Meg free. A system with a total of 4 Meg would need most drivers, disk caches, and TSR that use EMS or XMS memory to be unloaded. If you need to increase the amount of available memory, please refer to your DOS manual. SVGA Graphics 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 Fun 'N Games requires an SuperVGA video card with a minimum of 512K RAM.