Jumpers
| 1 3 5 7 9
| ---------------
| | o o o o o |
| | | Front Of Drive -->
| | o o o o o |
| ---------------
| 2 4 6 8 10
|
-------------------------------------------------------
Single drive: Pins 3-4 jumpered.
Two-drive master: Pins 3-4 jumpered and pins 5-6 jumpered.
Two-drive slave: Pins 3-4 open and pins 5-6
open.
LED connected: Pins 9-10 must be
jumpered to connect to an activity LED
on the controller. Without this jumper, the drive will
work, but there will be no activity light (unless you
connect an LED to the connector on the front of the
drive itself).