Idek Iiyama Vision Master 17 (MF-8617) Reference


This is a fairly popular monitor for use with the Amiga, since it is a high quality, relatively inexpensive 17-inch monitor that can sync down to about 23.5 kHz, and therefore works with most (all?) AGA "double" screenmodes. All presets and controls are digital, set through three front-panel buttons and an LCD display. The image can easily be expanded to fill the screen in all modes. (See Boards/A2320 'Amber' Reference for information on the A2320 'Amber' board that may be used with this monitor.)

Specifications

��� Sync Frequency: 23.5 kHz to 86.0 kHz Horizontal
������������������� 50 Hz to 120 Hz Vertical

������� Resolution: Maximum 1280 x 1024 at 80 Hz

� Input Connectors: Five BNC connectors and one DB15 (not high density)
������������������� (A cable is included to connect a HDD15 VGA-type
������������������� connector to the DB15 connector on the monitor.)

Pin-Outs

� DB15:

�� Pin 1: Red
�� Pin 2: Red Ground
�� Pin 3: Green
�� Pin 4: Green Ground
�� Pin 5: Blue
�� Pin 6: Blue Ground
�� Pin 7: Ground
�� Pin 8: NC
�� Pin 9: NC
� Pin 10: NC
� Pin 11: NC
� Pin 12: NC
� Pin 13: NC
� Pin 14: Horizontal or HV Sync
� Pin 15: Vertical Sync



[Main]