4) Format the disk and make it bootable, by typing:
format drive DF0: name Flashboot
install DF0:
5) Copy the corresponding Flashupdate file for YOUR machine to the disk.
If you have a CyberstormPPC board:
copy ram:Flashpdates/PPCUpdate DF0:
If you have a BlizzardPPC board with a 68040:
copy ram:Flashpdates/BlizzPPC040Update DF0:
If you have a BlizzardPPC board with a 68060:
copy ram:Flashupdates/BlizzPPC060Update DF0: NOTE: If you have a BlizzardPPC it's very important which 680x0 processor you've got.
6) TURN THE POWER OFF TO YOUR MACHINE AND WAIT 2 FULL MINUTES (that way you're sure no
patches and other stuff are still in memory)
7) Turn your Amiga on, while holding down both mouse-buttons, to get the Early Bootup
Menu.
8) Disable ALL hard drives in your system. (by clicking in the boot menu).
9) After making sure the diskette you created earlier is in drive DF0:, click on the
"Boot" button.
Your system should boot to a plain, blue Shell window, with a "1:> " prompt,
in low-res. If it does not, repeat starting at Step 6, but increase the time in Step 7 to
longer periods until you DO boot with a window as described.
11) Run the Flash program you copied to the diskette in Step 5 above.
with a CyberstormPPC type:
PPCUpdate
with a BlizzardPPC with 68040 type:
BlizzPPC040Update
with a BlizzardPPC with 68060 type
BlizzPPC060Update
NOTE: Press Return after you've typed the command :)
12) If all went well (it should print "Done." when finished), reboot your
machine, and everything should work fine.
If your system does not work after this, try repeating from Step 6 above, and if your
system STILL doesn't work, consult with your dealer about possible repairs.
DO NOT REBOOT YOUR MACHINE WHEN YOU ARE UPDATING!!! IT WILL
DESTROY THE ROM AND MAKE THE BOARD USELESS!!!