| From: | matt ainscough |
| Date: | 3 May 2000 at 22:35:11 |
| Subject: | Re: Someone just please please help!!! |
Hello oruk_amigan@btinternet.com
On 02-May-00, oruk_amigan@btinternet.com wrote:
<sniiiiiiiip>
> My problem: the memory i plug in is not recognised, and the memory is fine
> because I have tested it in another A1200 accelerator; a Viper V on
> another desktop A1200. It is 60ns type, Fast Page and EDO; good
> quality because it is working fine.
>
> I plug it in via the Ateo Bus 150pin edge connector, and all that I get
> is no memory; therefore no PPC, but CPU shows there is a 68040 there.
> Whooop deeee whooop; a 68040 that can't even perform properly
> because of NO fast RAM, and to top it off, I had a faster 68040
> before... :///
>
> I try removing the Ateo Bus controller and plug directly to the 150pin
> A1200 accelerator slot - no joy :-[=
<sniiiiiip>
Not sure what this 150pin thing is but this may help.
The PPC needs 4meg installed on the board as fast RAM for the minimum configuration.
Try plugging some RAM in the PPC board as well.
Or hold down ESC while booting for the secret menu and fanny with the settings there.
If you didn't get a manual, let me know and I'll scan mine for you.
Cheers
matt
P.S. just read todays mails before sending this and I think you are already doing this. The offer of the manual is still open though but I can't see anything of any use in it.
------------------------------------------------------------------------
High rates giving you headaches? The 0% APR Introductory Rate from
Capital One. 9.9% Fixed thereafter!
http://click.egroups.com/1/3010/2/_/468125/_/957386604/
------------------------------------------------------------------------
Quote carefully and read all ADMIN:README mails