1	Camera battery charge is low.
\nTurning camera off to replace or charge the battery or to connect to an AC adapter is recommended.
2	Camera has turned OFF because of low battery condition.
\nPlease exit application and replace battery.
3	Camera battery is charged.
4	The camera powered down because it has not been accessed for a long period.
5	Camera powered down due to low battery charge.
\nReconnect to camera after replacing or charging the battery or connecting to an AC adapter.
6	Opening the battery chamber cover caused the camera to power down.
\nClose the cover and reconnect to continue.
7	Changing the camera's mode switch position caused the camera to disconnect.To connect again, ensure the camera is ready.
8	Opening the memory card slot cover caused the camera to power down.
\nClose the cover and reconnect to continue.
9	Internal Error.
\nDisconnect from camera.
10	Camera is no longer available. Quit the application and check the cable connection or another cause of a disconnection.
11	Transferring image data.
12	Decoding JPEG image.
13	Transferring data to the application.
14	Click Cancel to stop transfer.
15	%d of %d image(s) transferred.
16	File not found or inaccessible.
17	File access error.
18	Image properties data not acquired.
\nThe image type may not be supported, the file contents may have been altered, or a portion of the data may be missing.
19	Camera not detected.Check the camera connection and try to reconnect.
20	The camera is busy. No response from camera.
21	Internal error in camera.
\nCanon Digital Camera TWAIN will disconnect the camera.
22	No memory card in camera.
\nInsert a memory card and then reconnect.
23	Camera driver software not installed properly.Reinstall the Canon Digital Camera TWAIN driver that accompanied your camera.
24	Communications port in use.If another application program is connected to the camera, quit that program and reconnect with RemoteCapture.
25	Camera not detected! Camera poorly attached or not ready.
\nCheck power and cable connections.
\nClick Communication Settings button to confirm settings.
26	Incompatible camera.Check the camera model for compatibility.
27	Insufficient system memory resources.Quit other application programs that are running or free up additional hard disk space.
28	This image type is not supported.
\nCannot continue processing.
29	There are no images in the camera
30	The camera is busy and cannot respond. If the LCD monitor of the camera is turned on, turn it off. Click Retry to try again or click Cancel to disconnect the camera.
31	Decoding RAW image.
32	Decoding TIFF image.
33	Decoding image.
34	Creating preview image.
35	%d images will be erased. Erased images are permanently lost.
\nDo you want to erase the selected images?
36	Updated images on camera.
\nClick the OK button when the access lamp on the camera goes out.
\nThis will update the thumbnail display.
37	The camera will disconnect in %1!u! seconds. Do you wish to maintain the connection?
38	Comment is too long. Comments up to 120 characters long can be input.
39	Creating index image.
40	Number of characters or digits is too long.
\nThe file name prefix can be up to 12 standard characters (or 6 Asian characters) and the sequence number can be up to 9 digits.
41	The start number has more than the specified number of sequence number digits.
42	The folder already contains file '%s'.
\nOK to overwrite?
43	Specify a sheet size in the range 4 to 11 inches for both height and width.
44	Specify sheet resolution in range 50pixels/inch to 300pixels/inch.
45	Save File
46	%d of %d file(s) saved.
47	Saving to file.
48	Click cancel to halt remainder of save operation.
49	Data not saved for some images.
\nSave data?
50	Unable to save images with an image type other than that specified when the folder was selected.
51	Specify a sheet size in the range 10.16cm to 27.94cm for both height and width.
52	Specify a sheet resolution in the range 20pixels/cm to 118pixels/cm.
53	Setting same tone curve for RGB. OK to proceed?
54	The specified folder name already exists or contains ineligible characters.
\nCouldn't create folder.
55	The specified folder name already exists or contains ineligible characters.
56	Unsupported screen setting.
\nSpecify a screen resolution of 800x600 or higher with 16bit colors or higher.
57	Protected images were not erased.
58	Invalid value entered.
\nValid values must be in the range 256 to 65279 and separated from other points by at least 256.
\nValid output values must be in the range 1 to 65534 and separated from other points by at least 1.
59	Cannot detect camera.   
\nCheck connection to camera, then retry.
60	%s is marked with a print mark.
\nDelete it anyway?
61	%s is registered in a slide show.
\nDelete it anyway?
62	%s is registered in a slide show and marked with a print mark.
\nDelete it anyway?
63	%s has been marked with one of the following.
\n	Print Mark
\n	Slide Show Mark
\n	Transfer Mark
\nDelete it anyway?
64	Specify resolution in range 50pixels/inch to 2400pixels/inch.
65	Specify resolution in range 20pixels/cm to 944pixels/cm.
66	An unsupported image type is included in the file save.
67	You do not have access permission for the folder.
\nPlease select a different folder.
68	Drive %s is not ready.
\nPlease insert a disk.
69	Cannot save to drive %s because the drive is a CD-ROM.
\nPlease select a different folder.
70	Cannot save to drive %s because it is write-protected.
\nTurn off write protection or set another disk.
71	Error saving file.
72	Building image list.
73	Building image list.
74	Extracting image(s)
75	Building image list.
76	Rotating image...
77	Error writing information. This information is not reflected in the image.
78	Creating preview image.\nAcquiring image data.
79	Creating preview image.\nDecoding image.
80	Creating preview image.\nDecoding image.
81	Creating preview image.\nRotating image...
82	An unsupported image type is included in the image transfer.
83	Do not convert
84	Exif-JPEG
85	Exif-TIFF(8bit/ch)
86	TIFF(16bit/ch)
87	Standard
88	1 (High Compression Ratio)
89	2
90	3
91	4 (Highest Image Quality)
92	5 (Highest Image Quality)
93	Both
94	RAW Only
95	JPEG Only
96	\*.*
97	\*.JPG
98	\*.TIF
99	\*.CRW
100	\*.TIF
101	_J.JPG
102	_RJ.JPG
103	_RT8.TIF
104	_RT16.TIF
105	_R.TIF
107	.JPG
108	.TIF
109	%s TWAIN Driver
110	\VarFileInfo\Translation
111	\StringFileInfo\%04x%04x\
112	Canon Camera/DV
113	Canon Camera Support Library
114	File Name
115	Shooting Date/Time
116	pixels / inch
117	pixels / cm 
118	0
119	1
120	2
121	3
122	4
123	5
124	Preferences
125	Low
126	Medium
127	High
128	Default
129	Shot Settings
130	High
131	Medium-high
132	Standard
133	Medium-low
134	Low
135	One of the selected images cannot be extracted as a JPEG image.
\nContinue process for extractable images?
136	Canon Utilities RAW Image Converter Version %s
137	JPEG contained in selected image.
\nProcessing not applied to JPEG.
138	IPTC Information saved.
139	Unable to overwrite listed image files.
140	The following RAW image types, which cannot be saved as TIFF (16bit/ch) images are included.
\n	PowerShot G1
\n	PowerShot Pro90 IS
\nImages saved as Exif-TIFF (8bit/ch) images.
141	Converting RAW Image.
142	_JFR.JPG
143	.CRW
144	.WAV
145	000000000%d
146	Rough
147	Mid.Rough
148	Standard
149	Mid.Fine
150	Fine
151	Off
152	Updating Thumbnail...
153	_%d
154	Specified folder does not exist.
\nClick OK to create specified folder.
155	Invalid number of digits entered.
\nAvailable digits are 1 to 9.
156	Images for which IPTC information cannot be set are included in the selected images.
\nIPTC information setup cannot be performed on these images.
157	The compensation value is always displayed as 0.0 when multiple RAW images are selected.
158	%s%.1f
159	inch
160	cm
161	DPI
162	Ev
163	MB
164	KB
165	Images in DCIM folder (JPEG & RAW)
166	RAW (*.TIF) images in any folder
167	RAW (*.CRW) images in any folder
168	JPEG (*.JPG) images in any folder
169	RAW in DCIM folder
170	List images with the following image types. Please select DCIM folder.
171	List images with the following image types.
172	RGB
173	Rch
174	Gch
175	Bch
176	TCD File(*.TCD)|*.TCD||
177	Highest Priority (=1)
178	Normal (=5)
179	Low Priority (=8)
180	IPTC information
181	IPTC File(*.IPK)|*.IPK||
182	&Read
183	&Save As...
184	&Clear
185	<&Previous
186	&Next>
187	&Go Back
188	Save
189	OK(&D)
190	%d/%d
191	Cameras that support the RAW image type are listed. Select the camera model you are using from the list. 
\n
\nThe selected model is added to the model-specific processing mode, and advanced settings for RAW image conversion become available.
192	You can also select a model later in the Preferences dialog box.
193	Specify an image transfer destination folder.
194	EXE File(*.EXE)|*.EXE||
195	\VarFileInfo\Translation
196	\StringFileInfo\%08x\
197	FileVersion
198	ProductName
199	Are you sure you want to delete the '%s' folder and all of the files inside it?
200	Disconnected from '%s'.
201	Delete Original Folder Confirmation
202	Copying was completed successfully.
\nErase original folder and images?
203	Analyzing images...
204	Images that are not supported by model-specific processing are included in these images.
\nModel-specific processing cannot be performed on these images.
\nPerform model-specific processing only on supported images?
205	Click White Balance was specified for images not supported by model-specific processing.
\nPerform Click White Balance processing on the RAW images using model-specific processing mode.
206	Canon Utilities File Viewer Utility
207	Specified execution file does not exist. 
208	Communication Settings
209	Detected Camera Model
210	Select Camera
211	More than one camera is connected.
\nSelect a camera to set up from the list. 
212	Select Camera/Memory Card
213	Please select a camera or a memory card.
214	Specify an image transfer folder when you specify the image transfer destination application.
215	Although RAW or animated images exist in the camera, this software only displays JPEG images
216	A file name cannot contain any of the following characters:
\n
\n \ / :  , ; * ? " < > |
217	%s could not be overwritten because it is erase-protected.
218	Protected images. Images are unable to be overwritten.
219	The following file is either protected or cannot be displayed with the File Viewer Utility. 
\nThese files and folders have not been deleted. 
220	Saving IPTC information...
221	Could not find audio device or it is not responding.
222	No image transfer folder was specified. 
\nSpecify a folder in the General settings in the Preferences dialog box.
223	No application to transfer the images has been specified.
\nSelect an application to send the images in the General settings in the Preferences dialog box. 
224	Cannot write to the selected folder. 
\nSelect another folder.
225	You cannot move this folder because a folder named '%s' already exists in this folder.
226	You cannot copy this folder because a folder named '%s' already exists in this folder.
227	The following files cannot be displayed using the File Viewer Utility.
\nThese files and folders were not deleted. 
228	Files and folders not deleted
229	No memory card in camera.
\nInsert the memory card and try again to connect. 
230	No image for which IPTC information can be set has been selected.
231	Canon Utilities RemoteCapture
232	Canon Utilities Camera Window
233	Version %s
234	A folder name cannot contain any of the following characters:
\n
\n \ / :  , ; * ? " < > |
235	Images with changed exposure parameters already exist.
\nSwitching folders will clear results of exposure parameter changes.
\nSwitch folders?
236	Do not display this dialog again.
237	No changes were saved to read-only files.
238	The camera's date/time setting is invalid.
\nSetting to the date/time of your PC.
239	You cannot perform this operation on read-only media.
240	You do not have access rights to this folder using this application.
241	The character string is too short.
242	Perform this operation after setting the Color Effects Mode to Custom.
243	Unsupported images are included in the selected images.
\nThe process cannot be performed on these images.
244	Insufficient disk space.
245	Insufficient memory.
246	Specify resolution in range 10 to 2,000 pixels/inch.
247	Copyright (C) Canon Inc.
248	File Viewer Utility is unable to access the folder. Select another folder.
249	Images with changed exposure parameters already exist.
\nExiting the application will clear results of exposure parameter changes.
\nExit the application?
250	Canon Utilities Camera Window(Launcher)
251	Select Camera
252	Please select a camera.
253	Canon EOS Support Library
254	Transferring sound files.
57344	Canon Digital Camera
57345	Progress
57346	Transfer Images
57347	Yes
57348	No
57349	Save File
57350	Extract & save JPEGs
57351	Save index file
57352	CameraWindow
57353	Camera is no longer available.\nQuit the application and check the cable connection or another cause of a disconnection.
57354	There is no space available in the folder to which you want to save.\nPlease check the folder and try again.\n
57355	Skip
57356	Stop
57357	The camera is busy. No response from camera.
57358	This application can't start directly.
61440	Open
61441	Save As
61442	All Files (*.*)
61443	Untitled
61446	an unnamed file
61457	&Hide
61472	No error message is available.
61473	An unsupported operation was attempted.
61474	A required resource was unavailable.
61475	Out of memory.
61476	An unknown error has occurred.
61696	Invalid filename.
61697	Failed to open document.
61698	Failed to save document.
61699	Save changes to %1?
61700	Failed to create empty document.
61701	The file is too large to open.
61702	Could not start print job.
61703	Failed to launch help.
61704	Internal application error.
61705	Command failed.
61706	Insufficient memory to perform operation.
61707	System registry entries have been removed and the INI file (if any) was deleted.
61708	Not all of the system registry entries (or INI file) were removed.
61709	This program requires the file %s, which was not found on this system.
61710	This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s.
61712	Please enter an integer.
61713	Please enter a number.
61714	Please enter an integer between %1 and %2.
61715	Please enter a number between %1 and %2.
61716	Please enter no more than %1 characters.
61717	Please select a button.
61718	Please enter an integer between 0 and 255.
61719	Please enter a positive integer.
61720	Please enter a date and/or time.
61721	Please enter a currency.
61728	Unexpected file format.
61729	%1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730	Destination disk drive is full.
61731	Unable to read from %1, it is opened by someone else.
61732	Unable to write to %1, it is read-only or opened by someone else.
61733	An unexpected error occurred while reading %1.
61734	An unexpected error occurred while writing %1.
61836	Unable to read write-only property.
61837	Unable to write read-only property.
61840	Unable to load mail system support.
61841	Mail system DLL is invalid.
61842	Send Mail failed to send message.
61856	No error occurred.
61857	An unknown error occurred while accessing %1.
61858	%1 was not found.
61859	%1 contains an invalid path.
61860	%1 could not be opened because there are too many open files.
61861	Access to %1 was denied.
61862	An invalid file handle was associated with %1.
61863	%1 could not be removed because it is the current directory.
61864	%1 could not be created because the directory is full.
61865	Seek failed on %1
61866	A hardware I/O error was reported while accessing %1.
61867	A sharing violation occurred while accessing %1.
61868	A locking violation occurred while accessing %1.
61869	Disk full while accessing %1.
61870	An attempt was made to access %1 past its end.
61872	No error occurred.
61873	An unknown error occurred while accessing %1.
61874	An attempt was made to write to the reading %1.
61875	An attempt was made to access %1 past its end.
61876	An attempt was made to read from the writing %1.
61877	%1 has a bad format.
61878	%1 contained an unexpected object.
61879	%1 contains an incorrect schema.
61888	pixels