27     ;escape char: to escape from CONNECT mode back to the Apple.
13     ;end-of-line char send to host after a kermit package.
35     ;the kermit quote char the Apple uses to prefix control chars.
0      ;the kermit padding char the Apple needs.
0      ;number of padding chars the Apple needs.
1      ;start-of-header (SOH) char the Apple uses to indicate a kermit packet.
5      ;Apple key to manually interrupt the sending/receiving of files: <^E>
17     ;Xon char used during CONNECT when printing the screen.
19     ;Xoff char used during CONNECT when printing the screen.
40     ;number of wait-cycles after sending a Xoff during the screendump.
94     ;max kermit packet length the Apple can handle ( 20..94 ).
5      ;max number of retries before the Apple breaks off sending/receiving.
5      ;number of seconds(1..31) after which the host should resend a packet.
0      ;half-duplex mode. ( 0 = false ).
0      ;debug mode during sending/receiving. ( 0 = false ).
1      ;file-warning for incoming files to avoid name conflicts. ( 0 = false )
1      ;text-file send/rec mode. ( 1 = true )
1      ;no formfeeds during CONNECT when screendump is on. ( 1 = true )
1      ;in CONNECT:no echoing of control chars (exc. cr,lf,ff,bs,bell )(1=true)
0      ;backspace key translated to DEL during CONNECT. ( 1 = true )
1      ;type of acia on serial card.(0 = unknown, 1 = 6551 acia, 2 = 6850 acia )
-16214 ;adress of the acia command register. ( Apple Super Serial Card )
-16213 ;adress of the acia control register. ( Apple Super Serial card )
300    ;initial baud rate.
8      ;number of databits ( word-length ).
1      ;number of stopbits.
0      ;parity ( 0=nopar; 1=oddpar; 2=evenpar; 3=markpar; 4=spacepar ).
80     ;80= 80-column card in slot 3; 40= normal 40 column screen.
       ;****************************** SSC.TEXT *******************************

