-------------------------------------------------------------- Microsoft Plus! for Windows 95 Readme for Internet Connections August 1995 -------------------------------------------------------------- (c) Copyright Microsoft Corporation, 1995 This document provides complementary or late-breaking information to supplement the Microsoft Plus! documentation. Additional information about installing and using the Internet Jumpstart Kit is added to the World Wide Web as it becomes available. This information can be found at the following address for Microsoft's World Wide Web server: http://www.msn.net ------------------------ HOW TO USE THIS DOCUMENT ------------------------ To view Internet.txt on screen in Notepad, maximize the Notepad window. To print Internet.txt, open it in or another word processor, and then use the Print command on the File menu. -------- CONTENTS -------- INSTALLING PC CARD (PCMCIA) MODEMS USING SERIAL LINE INTERNET PROTOCOL (SLIP) SUPPORT MANUALLY LOGGING ONTO AN INTERNET CONNECTION USING SCRIPTING FOR DIAL-UP NETWORKING USING A LOCAL AREA NETWORK PROXY OR FIREWALL USING PROGRESSIVE NETWORKS' REALAUDIO SUPPORT USING INTERNET EXPLORER WITH VIRTUAL MEMORY INSTALLING PC CARD (PCMCIA) MODEMS ================================== If you are using a PC card (PCMCIA) modem for your Dial-up Networking connection to the Internet and have not yet installed the modem, you may have to enable Windows 95 PC card socket support before running the Internet Setup wizard. To enable PCMCIA socket support: 1. Click the Start button, point to Settings, and then click Control Panel. 2. Double-click the PC Card (PCMCIA) icon to start the PC Card Wizard, and then follow the instructions on your screen. NOTE: If you can't find the PC Card icon, you may need to install the PC card (PCMCIA) drivers. To do this, double-click the Add New Hardware icon, click No, click PCMCIA Support from the list of hardware items, and then follow the instructions on your screen. USING SERIAL LINE INTERNET PROTOCOL (SLIP) SUPPORT ================================================== Setting Up A SLIP or CSLIP Connection ------------------------------------- The Internet Jumpstart Kit supports three kinds of Dial-up Networking connection protocols: point-to-point protocol (PPP), serial line internet protocol (SLIP), and compressed SLIP (CSLIP). The Internet Setup wizard creates only PPP dial-up connections. If your Internet service provider requires you to use a SLIP or CSLIP connection, do the following: 1. Create the Dial-Up Networking connection by runing the Internet Setup wizard while setting up Microsoft Plus!. You can also do this after setting up Microsoft Plus! by clicking the Start button, pointing to Programs, then pointing to Accessories, then pointing to Internet Tools, and then double- clicking Internet Setup Wizard. If your Internet service provider requires you to enter a sequence of commands to establish the SLIP or CSLIP connection, make sure the "Bring Up Terminal Window After Dialing" box is checked. TIP: You may also be able to use Dial-Up Scripting to automate entering the required sequence of commands. See "Using Scripting For Dial-Up Networking" below for more information. 2. Double-click the My Computer icon, and then double-click the Dial-Up Networking folder. 3. Click the connection you created in step 1, and then click Properties on the File menu. 4. Click Server Type, click either SLIP or CSLIP in the Type Of Dial-Up Server list, and then click OK. Running the Internet Setup Wizard If You Have an Existing SLIP Connection ------------------------------------------------------------------------- If you have set up an existing Internet Dial-Up Networking connection to use SLIP as the server type and you run the Internet Setup Wizard, the wizard will change the server type for the existing connection to PPP. To change the server type for the connection back to SLIP: 1. Double-click My Computer, and then double-click Dial-Up Networking. 2. Using the right mouse button, click the connection you want to change, and then click Properties. 3. Click Server Type. 4. In the Type of Dial-Up Server list, click SLIP: Unix Connection, and then click OK. 5. In the Properties dialog box, click OK to save your changes. MANUALLY LOGGING ONTO AN INTERNET CONNECTION ============================================ Some Internet service providers require you to manually log on in order to establish an Internet connection. If you are running the Internet Setup Wizard to create such a connection, make sure you check the Bring Up Terminal Window After Dialing box. You can also select this option after you have run the wizard by doing the following: 1. Double-click My Computer, and then double-click Dial-Up Networking. 2. Using the right mouse button, click the connection you want to change, and then click Properties. 3. Click Configure, and then click Options. 4. Make sure the Bring Up Terminal Window After Dialing box is checked, and then click OK. 5. In the Properties dialog box, click OK to save your changes. TIP: You can also use Scripting for Dial-Up Networking to automate logging onto the Internet. For more information, see the following topic. USING SCRIPTING FOR DIAL-UP NETWORKING ====================================== You can use Scripting for Dial-Up Neworking to automate the manual steps required by certain Internet service providers to establish a connection to the Internet. If your Internet service provider recommends using an automated connection script, after running the Internet Setup wizard, you can create a script file, and then Use the Dial-Up Scripting Tool to associate this file with the Dial-Up Networking connection you created. For more information about creating a Dial-Up Networking script and associating it with your Internet Dial-Up Networking connection: 1. Click the Start button, and then click Help. 2. Double-click the Microsoft Plus! For Windows 95 book. 3. Double-click the Using The Network And The Internet book, and then click Automating A Dial-Up Networking Connection. 4. Follow the instructions in the Help topic. USING A LOCAL AREA NETWORK PROXY OR FIREWALL ============================================ If you want to use a proxy or firewall to protect your Local Area Network from being accessed by other on the Internet, follow these steps: 1. Run the Internet Setup wizard while setting up Microsoft Plus!. You can also run the wizard after setting up Microsoft Plus! by clicking the Start button, pointing to Programs, then pointing to Accessories, then pointing to Internet Tools, and then double- clicking Internet Setup Wizard. 2. Configure your computer to connect to the Internet by using TCP/IP on on your local area network. 3. When asked for the gateway address, type the address supplied by your network administrator only if your organization uses gateways for routing information over the network. NOTE: The gateway computer is not the same as the proxy or firewall computer which protects your local area network from the Internet, so do not type your proxy or firewall address here. 4. Click the Start button, point to Settings, and then click Control Panel. 3. Click the Internet icon, and then click the Advanced tab. 5. Make sure the Use Proxy Server box is checked. 6. Type the http server address and the port number for the computer you want to use as the proxy server in the Proxy Server box. The following is an example of a proxy server address and port number: http://myproxy.mycompany.com:80 In the Bypass Proxy On box, type the names of the computers, domains, and ports on the Internet that, when accessed, will not go through the proxy server. Separate each item you type with a comma. If you do not know what to type in the Proxy Server, or Bypass Proxy On boxes, see your network administrator. For Help on these items, click the ? in the title bar, and then click the item. USING PROGRESSIVE NETWORKS' REALAUDIO SUPPORT ============================================= The Internet Jumpstart Kit includes support for Progressive Networks' RealAudio. This enables you to listen to audio files in real time over a dial-up modem or direct-network Internet connection. To use RealAudio, you must have a Windows 95-supported sound card installed in your computer. RealAudio works best on 486/33 or faster processors. To try RealAudio, connect to http://www.realaudio.com. NOTE: RealAudio will not work if your connection is routed through a local area network proxy or firewall. USING INTERNET EXPLORER WITH VIRTUAL MEMORY =========================================== Internet Explorer requires you to use virtual memory. Otherwise, Internet Explorer will not run properly. To make sure you are using virtual memory: 1. Click the Start button, then point to Settings, and then click Control Panel. 2. Double-click the System icon, and then click the Performance tab. 3. Click the Virtual Memory button. 4. If you are specifying your own virtual memory settings, make sure the Disable Virtual Memory box is unchecked. If this box is checked, then you are not using virtual memory and Internet Explorer won't run. TIP: You can let Windows manage virtual memory for you by selecting the Let Windows Manage My Virtual Memory Settings option.