Stirling Technologies, Inc.  (c) 1990-1994
SRCDIR
SRCDISK
TARGETDISK
TARGETDIR
WINDIR
WINDISK
WINSYSDIR
WINSYSDISK
ERRORFILENAME	
INFOFILENAME
SUPPORTDIR
CMDLINE
ISVERSION
SHAREDB
LAST_RESULT
CMDVALUE
HINST_INSTALL
BATCH_INSTALL
LOGHANDLE
_sdRECT
right
bottom
PRODINFO
serNumber
regName
regOrg
isUpgrade
firstUse
productType
expirationType
expired
expireDateDay
expireDateMonth
expireDateYear
relativeExpire
grace
major_version
minor_version
upgradeDateDay
upgradeDateMonth
upgradeDateYear
periodsUsed
DATEINFO
month
_sdSIZE
SelectObject
GetTextExtentPoint
EnableWindow
GetClassName
GetDC
GetDlgItem
GetFocus
GetWindowLong
GetWindowRect
GetWindowWord
IsWindow
IsWindowEnabled
MoveWindow
USER	
ReleaseDC
SetFocus
SetWindowText
ShowWindow
KERNEL
GetModuleHandle
GetClientRect
SetWindowPos
PostMessage
ShowCursor
SystemParametersInfo
DVZSETUP
RegNumValid
DVZSETUP
LoadProdInfoFile
DVZSETUP
WriteProdInfoToShell
DataViz Inc.a	
MacOpenera
1.00a
macopen.exe
CPINST.CPa	
CPINST.CP!
Unable to copy Installation File.  Please call DataViz Tech Support at (203) 268-0030.A
DVZSETUP.DLL
Unable to find Installation File.  Please call DataViz Tech Support at (203) 268-0030.A
Registration
Enter your product registration information below:
Enter a valid registration number.A
Enter a valid registration number.A
PRODINFOa
regNameA
PRODINFOa
regOrgA
PRODINFOa	
serNumberA
WIN.INIa	
MACOPENERa
PATHR
MACOPEN
There is not enough space available on the disk
Please free up some space or change the target location
to a different disk
Windows 3.1,
Windows 95,
Windows NT,
Windows 32s,
Unknown
Setup has determined you are using b
.  Is this correct ?
Confirm Windows Version
Setup has determined you are running the Windows Version specified below.  If this is incorrect, select the correct version:
Windows VersionsJ
Windows 3.1 (16 bit)A
Windows 95 (32 bit)A
Windows NT (32 bit)A
Windows 32s (32 bit)A
Windows 3.1 (16 bit)!
Windows 95 (32 bit)!
Windows NT (32 bit)!
Windows 32s (32 bit)!
WIN.INIa	
MACOPENERa
PATHb#
macopen.exe
General"
Copying 16 bit program files...,
Copying 32 bit program files...
MO.Za
prog\*.*A
MO.Za
prog16\*.*A
MO.Za
prog32\*.*A
System
MO.Za
systemNT\*.*A
drivers
MO.Za
systemNT\drivers\*.*A
MacOpenDeinstKeyA
MacOpener
Copying 16 bit program files...,
Copying 32 bit program files...
Unable to create a directory under b
Please check write access to this directory.*
General file transfer error.a0
Please check your target location and try again.$
 Error Number:$
 Related File: $
Creating Program Group and Icons....&
MacOpener<
MACOPEN.EXE
MacOpenerb
WINHELP.EXEa
MOPENER.HLP$
MacOpener Helpb+
UNINST.EXE
unInstall MacOpenerb
MacOpenerb
SYSTEM\CurrentControlSet\Services\ASPI32P
ErrorControlA
StartA
TypeA
macopen.exe
Unable to write to Executable.  Please call DataViz Tech Support at (203) 268-0030.A
DVZSETUP.DLL
Installation complete."
Setup is complete.  You must restart your computer to complete the installation of MacOpener.,
Setup is complete.
Installing a	
MacOpener
SetupA
This program requires VGA or better resolution.A
MacOpener Device Driver$
The MacOpener Device Driver allows you to access Macintosh Disks from within the File aW
Manager, DOS, and other programs.  Do you want to install the MacOpener Device Driver ?
NOTE: The MacOpener Device Driver does NOT have to be installed to use Macintosh Disks with the MacOpener Windows program.
Device Driver InstallationJ
Installing the MacOpener Device Driver
Choose the method for installing the MacOpener Device Driver (the recommended choice for your system is selected):
You should choose AUTOEXEC.BAT if you have a network or CD-ROM Drive immediately following your last Hard Drive.$
  For example a Hard Drive at C: and a Network or CD-ROM Drive at D:.  Otherwise you should choose CONFIG.SYS.
NOTE: The MacOpener Device Driver does NOT have to be installed to use Macintosh Disks with the MacOpener Windows program.
Device Driver Installation MethodsJ
CONFIG.SYSA
AUTOEXEC.BATA
Do Not Install the Device DriverA
CONFIG.SYS!
AUTOEXEC.BAT!
Do Not Install the Device Driver!
Modifying CONFIG.SYS File
The following line(s) must be added to your CONFIG.SYS file:
CONFIG.SYS
C:\CONFIG.MO
MO.SYS $
DEVICE=b)
MO.SYS $
DEVICEb&
CONFIG.MO*
Your original CONFIG.SYS has been saved as CONFIG.MO.A
The modifications you must make are in the file, C:\CONFIG.MO.A
Modifying AUTOEXEC.BAT File
The following lines must be added to your AUTOEXEC.BAT file:
AUTOEXEC.BAT
C:\AUTOEXEC.MO
PATH=%PATH%;b
LOADMO.EXE
%PATH%;b
PATHb&
LOADMO.EXE
WINB9
AUTOEXEC.MO*
Your original AUTOEXEC.BAT has been saved as AUTOEXEC.MO.A
The modifications you must make are in the file, C:\AUTOEXEC.MO.A
edit(
SETUPSTR862R)
Disk Space0
temp.txt
temp.txt
In function '%s':
Unable to create dialog.
Make sure the _ISRES.DLL is in _SETUP.LIB.
Errorb*
_sdSIZEa
%s-%ldb
SdRegisterUserEx!
ResultA
szNameA
szCompanyA
szSerialA
SdRegisterUserEx!
szNameA
szCompanyA
szSerialA
ResultA
SdShowFileMods!
ResultA
nSelectionA
SdShowFileMods!
nSelectionA
ResultA
SdAskOptions!
ResultA
ComponentA
SdAskOptions!
ComponentA
ResultA
_MRQ^
3.00.062