[<<Previous Entry]
[^^Up^^]
[Next Entry>>]
[Menu]
[About The Guide]
6.1.4 Answer control
Manual answer Defines that the Mailer should wait for the
RING message from the modem and then send the
force answer string (below) to force the
modem to answer.
This is the safest way to control modem
answering and should be used unless your
modem does not support it. For Hayes
compatible modems, you should add S0=0 to one
of your init strings to prevent the modem
from answering automatically.
Force answer The string forcing the modem to answer an
incoming call. This should be "ATA|" in most
cases.
Answer delay When the Mailer receives the RING message
from the modem, it will pause for nn 1/10
seconds before sending the force answer
string. This should be set between four and
eight for most modems.
Limited hours
Starting time
Ending time Allows you to force the Mailer to ignore the
RING message outside the specified hours.
This is useful if the telephone line is
shared by other people during daytime but
available during the night for example.
This page created by ng2html v1.05, the Norton guide to HTML conversion utility.
Written by Dave Pearson