KERMIT
Section: User Commands (1C)
Updated: LOCAL
Index
Return to Main Contents
NAME
kermit - kermit file transfer
SYNOPSIS
kermit
[ option ...] [file ...]
DESCRIPTION
Kermit
is a file transfer program that allows files to be moved
between machines of many different operating systems and architectures.
This man page describes version 4E(072) of the program. See the C-Kermit
documentation (ckuker.doc) or the Kermit book for further information.
Arguments are optional. If
Kermit
is executed without arguments, it will enter command mode. Otherwise,
kermit
will read the arguments off the command line and interpret them.
The following notation is used in command descriptions:
- fn
-
A Unix file specification, possibly containing either of the "wildcard"
characters '*' or '?' ('*' matches all character strings, '?' matches
any single character).
- fn1
-
A Unix file specification which may not contain '*' or '?'.
- rfn
-
A remote file specification in the remote system's own syntax, which may
denote a single file or a group of files.
- rfn1
-
A remote file specification which should denote only a single file.
- n
-
A decimal number, in most cases between 0 and 94.
- c
-
A decimal number between 0 and 127 representing the value of an ASCII
character.
- cc
-
A decimal number between 0 and 31, or else exactly 127, representing the
value of an ASCII control character.
- [ ]
-
Any field in square braces is optional.
- {x,y,z}
-
Alternatives are listed in curly braces.
Kermit
command line options may specify either actions or settings. If
Kermit
is invoked with a command line that specifies no actions, then it will
issue a prompt and begin interactive dialog. Action options specify
either protocol transactions or terminal connection.
COMMAND LINE OPTIONS
- -s fn
-
Send the specified file or files. If
fn
contains wildcard (meta) characters, the Unix shell expands it into a
list. If
fn
is '-' then
Kermit
sends from standard input, which may come from a file:
kermit -s - < foo.bar
or a parallel process:
ls -l | kermit -s -
-
You cannot use this mechanism to send terminal typein. If you want to
send a file whose name is "-" you can precede it with a path name, as in
kermit -s ./-
- -r
-
Receive a file or files. Wait passively for files to arrive.
- -k
-
Receive (passively) a file or files, sending them to standard output.
This option can be used in several ways:
kermit -k
-
Displays the incoming files on your screen; to be used only in "local
mode" (see below).
kermit -k > fn1
-
Sends the incoming file or files to the named file,
fn1.
If more than
one file arrives, all are concatenated together into the single file
fn1.
kermit -k | command
-
Pipes the incoming data (single or multiple files) to the indicated
command, as in
kermit -k | sort > sorted.stuff
- -a fn1
-
If you have specified a file transfer option, you may specify an
alternate name for a single file with the
-a
option. For example,
kermit -s foo -a bar
-
sends the file foo telling the receiver that its name is bar. If more
than one file arrives or is sent, only the first file is affected by the
-a
option:
kermit -ra baz
-
stores the first incoming file under the name baz.
- -x
-
Begin server operation. May be used in either local or remote mode.
Before proceeding, a few words about remote and local operation are necessary.
Kermit
is "local" if it is running on a PC or workstation that you are using
directly, or if it is running on a multiuser system and transferring
files over an external communication line --- not your job's controlling
terminal or console.
Kermit
is remote if it is running on a multiuser system and transferring files
over its own controlling terminal's communication line, connected to
your PC or workstation.
If you are running
Kermit
on most systems,
Kermit
runs in remote mode by default, so on a PC or workstation, you will have
to put it into local mode. The following command sets
Kermit's
"mode":
- -l dev
-
Line --- Specify a terminal line to use for file transfer and terminal
connection, as in
kermit -l /dev/ttyi5
When an external line is being used, you might also need some additional
options for successful communication with the remote system:
- -b n
-
Baud --- Specify the baud rate for the line given in the
-l
option, as in
kermit -l /dev/ttyi5 -b 9600
-
This option should always be included with the
-l
option, since the speed of an external line is not necessarily what you
might expect.
- -p x
-
Parity ---
e,
o,
m,
s,
n
(even, odd, mark, space, or none). If parity is other than none, then
the 8th-bit prefixing mechanism will be used for transferring 8-bit
binary data, provided the opposite
Kermit
agrees. The default parity is none.
- -t
-
Specifies half duplex, line turnaround with XON as the handshake
character.
The following commands may be used only with a
Kermit
which is local --- either by default or else because the
-l
option has been specified.
- -g rfn
-
Actively request a remote server to send the named file or files;
rfn
is a file specification in the remote host's own syntax. If
fn
happens to contain any special shell characters, like '*', these must be
quoted, as in
kermit -g x\*.\?
- -f
-
Send a 'finish' command to a remote server.
- -c
-
Establish a terminal connection over the specified or default
communication line, before any protocol transaction takes place. Get
back to the local system by typing the escape character (normally
Control-Backslash) followed by the letter 'c'.
- -n
-
Like
-c,
but after a protocol transaction takes place;
-c
and
-n
may both be used in the same command. The use of
-n
and
-c
is illustrated below.
On a timesharing system, the
-l
and
-b
options will also have to be included with the
-r,
-k,
or
-s
options if the other
Kermit
is on a remote system.
If
kermit
is in local mode, the screen (stdout) is continously updated to show the
progress of the file transer. A dot is printed for every four data
packets, other packets are shown by type (e.g. 'S' for Send-Init), 'T'
is printed when there's a timeout, and '%' for each retransmission. In
addition, you may type (to stdin) certain "interrupt" commands during
file transfer:
-
Control-F: Interrupt the current File, and go on to the next (if any).
-
Control-B: Interrupt the entire Batch of files, terminate the transaction.
-
Control-R: Resend the current packet
-
Control-A: Display a status report for the current transaction.
-
These interrupt characters differ from the ones used in other
Kermit
implementations to avoid conflict with Unix shell interrupt characters.
With System III and System V implementations of Unix, interrupt commands
must be preceeded by the escape character (e.g. control-\).
Several other command-line options are provided:
- -i
-
Specifies that files should be sent or received exactly "as is" with no
conversions. This option is necessary for transmitting binary files.
It may also be used to slightly boost efficiency in Unix-to-Unix
transfers of text files by eliminating CRLF/newline conversion.
- -e n
-
Specifies the (extended) receive-packet length, a number between 10
and about 1000 (depending on the system). Lengths of 95 or greater require
that the opposite Kermit support the long packet protocol extension.
- -w
-
Write-Protect --- Avoid filename collisions for incoming files.
- -q
-
Quiet --- Suppress screen update during file transfer, for instance to
allow a file transfer to proceed in the background.
- -d
-
Debug --- Record debugging information in the file debug.log in the
current directory. Use this option if you believe the program is
misbehaving, and show the resulting log to your local
Kermit
maintainer.
- -h
-
Help --- Display a brief synopsis of the command line options.
The command line may contain no more than one protocol action option.
INTERACTIVE OPERATION
Kermit's
interactive command prompt is "C-Kermit>". In response to this prompt,
you may type any valid command.
Kermit
executes the command and then prompts you for another command. The
process continues until you instruct the program to terminate.
Commands begin with a keyword, normally an English verb, such as "send".
You may omit trailing characters from any keyword, so long as you
specify sufficient characters to distinguish it from any other keyword
valid in that field. Certain commonly-used keywords (such as "send",
"receive", "connect") have special non-unique abbreviations ("s" for
"send", "r" for "receive", "c" for "connect").
Certain characters have special functions in interactive commands:
- ?
-
Question mark, typed at any point in a command, will produce a message
explaining what is possible or expected at that point. Depending on the
context, the message may be a brief phrase, a menu of keywords, or a
list of files.
- ESC
-
(The Escape or Altmode key) --- Request completion of the current keyword
or filename, or insertion of a default value. The result will be a beep
if the requested operation fails. Tab does the same thing.
- DEL
-
(The Delete or Rubout key) --- Delete the previous character from the
command. You may also use BS (Backspace, Control-H) for this function.
- ^W
-
(Control-W) --- Erase the rightmost word from the command line.
- ^U
-
(Control-U) --- Erase the entire command.
- ^R
-
(Control-R) --- Redisplay the current command.
- SP
-
(Space) --- Delimits fields (keywords, filenames, numbers) within a
command.
- CR
-
(Carriage Return) --- Enters the command for execution.
LF
(Linefeed) or
FF
(formfeed) may also be used for this purpose.
- \
-
(Backslash) --- Enter any of the above characters into the command,
literally. To enter a backslash, type two backslashes in a row (\\).
A single backslash immediately preceding a carriage return allows you
to continue the command on the next line.
You may type the editing characters (DEL, ^W, etc) repeatedly, to delete
all the way back to the prompt. No action will be performed until the
command is entered by typing carriage return, linefeed, or formfeed. If
you make any mistakes, you will receive an informative error message and
a new prompt --- make liberal use of '?' and ESC to feel your way through
the commands. One important command is "help" --- you should use it the
first time you run
Kermit.
Interactive
Kermit
accepts commands from files as well as from the keyboard. Upon
startup,
Kermit
looks for the file .kermrc in your home or current directory (first it
looks in the home directory, then in the current one) and executes any
commands it finds there. These commands must be in interactive format,
not Unix command-line format. A "take" command is also provided for use
at any time during an interactive session. Command files may be nested
to any reasonable depth.
Here is a brief list of
Kermit
interactive commands:
- ! command
-
Execute a Unix shell command. A space is required after after the !.
- % text
-
A comment. Useful in take-command files.
- bye
-
Terminate and log out a remote
Kermit
server.
- close
-
Close a log file.
- connect
-
Establish a terminal connection to a remote system.
- cwd
-
Change Working Directory (also, "cd").
- dial
-
Dial a telephone number.
- directory
-
Display a directory listing.
- echo
-
Display arguments literally. Useful in take-command files.
- exit
-
Exit from the program, closing any open logs.
- finish
-
Instruct a remote
Kermit
server to exit, but not log out.
- get
-
Get files from a remote
Kermit
server.
- hangup
-
Hang up the phone.
- help
-
Display a help message for a given command.
- log
-
Open a log file --- debugging, packet, session, transaction.
- quit
-
Same as 'exit'.
- receive
-
Passively wait for files to arrive.
- remote
-
Issue file management commands to a remote
Kermit
server.
- script
-
Execute a login script with a remote system.
- send
-
Send files.
- server
-
Begin server operation.
- set
-
Set various parameters.
- show
-
Display values of 'set' parameters, program version, etc.
- space
-
Display current disk space usage.
- statistics
-
Display statistics about most recent transaction.
- take
-
Execute commands from a file.
The 'set' parameters are:
- block-check
-
Level of packet error detection.
- delay
-
How long to wait before sending first packet.
- duplex
-
Specify which side echoes during 'connect'.
- escape-character
-
Character to prefix "escape commands" during 'connect'.
- file
-
Set various file parameters.
- flow-control
-
Communication line full-duplex flow control.
- handshake
-
Communication line half-duplex turnaround character.
- line
-
Communication line device name.
- modem-dialer
-
Type of modem-dialer on communication line.
- parity
-
Communication line character parity.
- prompt
-
Change the
Kermit
program's prompt.
- receive
-
Set various parameters for inbound packets.
- retry
-
Set the packet retransmission limit.
- send
-
Set various parameters for outbound packets.
- speed
-
Communication line speed.
The 'remote' commands are:
- cwd
-
Change remote working directory (also, "remote cd").
- delete
-
Delete remote files.
- directory
-
Display a listing of remote file names.
- help
-
Request help from a remote server.
- host
-
Issue a command to the remote host in its own command language.
- space
-
Display current disk space usage on remote system.
- type
-
Display a remote file on your screen.
- who
-
Display who's logged in, or get information about a user.
FILES
$HOME/.kermrc Kermit initialization commands
./.kermrc more Kermit initialization commands
SEE ALSO
cu(1C), uucp(1C)
Christine Gianone,
Kermit User's Guide,
Columbia University, 7th Edition
- Frank da Cruz,
-
Kermit, A File Transfer Protocol,
Digital Press (1987)
- The file ckuker.doc.
-
DIAGNOSTICS
The diagnostics produced by
Kermit
itself are intended to be self-explanatory.
BUGS
See recent issues of the Info-Kermit digest (on the Internetwork, BITNET,
USENET, etc), or the file ckuker.bwr, for a list of bugs. See the file
ckuker.upd for descriptions of bugs that were fixed in each release.
Index
- NAME
-
- SYNOPSIS
-
- DESCRIPTION
-
- COMMAND LINE OPTIONS
-
- INTERACTIVE OPERATION
-
- FILES
-
- SEE ALSO
-
- DIAGNOSTICS
-
- BUGS
-
This document was created by
man2html,
using the manual pages.
Time: 23:14:03 GMT, February 06, 2023