Logical device Unblocking a logical device

After the rebuild operation is completed on a disk group, if the array contained RAID level-0 logical devices, you can unblock the RAID level-0 logical drives and access them once again. But remember, the logical device contains damaged data. You must re-create, install, or restore the data from the most recent backup disk or tape.

To unblock a blocked logical device:

  1. In the Logical devices view, click Logical device (blocked logical device).

  2. Right-click Unblock logical device.

  3. Click Yes to confirm, understanding that the data on the logical drive is not valid. The Adaptec Storage Manager unblocks the blocked logical drive.

  4. Initialize all unblocked logical devices before using them.

  5. Restore the data to the drive from your most recent backup disk or tape.

More information

Glossary | Contents

 

x-0356-ASM-00-06-EN