Could not send the event to the system.

Explanation:

An event could not be sent to the remote system.

Action:

1. Verify that the Adaptec Storage Manager is running on the remote system.
   
   
2. Verify that the port number specified in the Notification list matches the value for the start-up port number on the remote system.
   • You can verify the port number for this event in the Notification Manager by using the "System properties" window for this system.
     
     
   • You can verify the port number on the remote system by going to the Adaptec Storage Manager running on that system and doing the following:
     1. Click Agent actions Configure Adaptec Storage Manager agent.
     2. Click the General settings tab.
     3. Verify the value for the port number.
        
        
3. Verify the following:
   1. The remote system is on.
   2. Both the local and remote systems are connected to the network.
   3. TCP/IP networking support is configured on both the local and remote systems.
   4. The network is functioning.
      
      
4. Verify that the local and remote systems are using compatible versions of the Adaptec Storage Manager. If they are not, upgrade to the latest version of the Adaptec Storage Manager.

x-0050-ASM-00-06-EN