NetWare Connect 2 Initial Setup Survey Thank you for purchasing NetWare Connect 2. To help us in our continuing efforts to improve the ease-of-use of this product, please take a few minutes to fill out the following survey. For each question, put an X next to all answers that apply. 1. This installation was: An initial installation of NetWare Connect. An upgrade from NetWare Connect 1.0. Comments: 2. The version of NetWare you are running on your NetWare Connect server is: 3.12 4.10 other (Specify: _________) don't know Comments: 3. Which service(s) are you running? ARAS NCS PPPRNS RNS other (Specify: _________) don't know Comments: 4. Which of the following did you refer to during initial installation and setup. For those that you did use, rate the usefulness on a scale of 1-5, with 1 being the least useful and 5 being the most useful (note: we're not asking for a ranking of the 5 items, but an indication of how relevant the information contained in each item was): On-line instructions On-line help Quick install card Printed manual Technical support Comments: 5. How helpful did you find the new automated setup procedure? Very helpful Somewhat helpful Not very helpful It messed up my system I skipped automatic setup Comments: 6. Compared to other Novell products, how would you rate the ease of installation of NetWare Connect 2? Easiest Better than most About average Worse than most Hardest This is the first Novell product I've installed Comments: 7. What kind of ports do you have? Direct Connect lines Modems connected to serial ports X.25 Other Comments: 8. Was NetWare Connect able to determine what kind of modems you have? Listed more than one match Picked the wrong modem type (Please list actual modem type(s) below) Didn't recognize my modem (Please list modem type(s) below) I don't have any modems I skipped automatic modem detection Comments: 9. Please put an X next to the optional configuration items you perform: General ------- Rename ports Specify port descriptions Specify some ports as dial-in only or dial-out only Specify default directory context (4.X only) Specify server description and location Create additional port groups Change default audit log parameters Security-related ---------------- Restrict ports by user Restrict service by user Restrict service by port Restrict service access to port by time-of-day Specify maximum connect time for all users Specify maximum connect time for specific users Specify maximum idle time for all users Specify maximum idle time for specific users Specify a global dialback mode Specify a dialback mode for specific users Restrict dial-out numbers for all users Restrict dial-out numbers for specific users Set remote client passwords for users Set password lockout on failed logins Specify a minimum password length Change default dialback parameters (wait time, busy retry count, interval) ARAS ---- Specify default zone restrictions Specify zone restrictions for specific users Specify the client version(s) to support Enable CRC checking Force remote clients to enter password Specify an ARAS greeting NCS --- Create additional NCS general names Change the NCS server alias Change the NCS dial-in general name Specify an NCS modem-independent group Disable NCS or NASI security Change the NASI command interpreter prompt Change the NCS break duration PPPRNS ------ Disable security Change the default authentication protocols Specify IPX address range for users or containers Specify an IPX home server list for users or containers Specify IP domain information for users or containers Specify IP boot parameters for users or containers Other ----- Generate a configuration report to verify your configuration settings None of the above Comments: 10. What else could we have done to simplify installation and initial setup? Contact information (optional) ------------------------------ Name: Title: Company Name: Address: City: State: Zip: Phone Number: ext: Fax Number: CompuServe ID: