NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:              NASI Maximum User Limitation Fix
DOCUMENT ID:        TID000319
DOCUMENT REVISION:  A
DATE:               01JUL93
ALERT STATUS:       Yellow
INFORMATION TYPE:   Symptom Solution
README FOR:         PTF205.EXE

NOVELL PRODUCT and VERSION:
NetWare Asynchronous Communication Services (NACS) 3.0
NetWare Asynchronous Communication Services (NACS) 2.0

ABSTRACT:
The present version of NASI Application Installation Program (INSTAPPS) has
a limit on the number of users that can be added to the UART file.  It has
been possible to get from 40-56 users added to the UART file.  After adding
that many, you would get several different errors.
_________________________________________________________________

DISCLAIMER
THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL. 
NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. 
HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION
ONLY.  NOVELL MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS
INFORMATION.
_________________________________________________________________

Self-Extracting File Name:  PTF205.EXE

Files Included     Size     Date        Time

\
INSTAPPS.EXE      61448   03-05-90      2:30p
INSTAPPS.MSG      12672   08-09-89     10:33a
  PTF205.TXT          (This File.)
\PTF206\
INSTAPPS.EXE      61448   03-05-90      2:30p
INSTAPPS.MSG      12672   08-09-89     10:33a
     READ.ME       1330   05-10-90     08:46a


              NASI Maximum User Limitation Fix


This applies to:  NetWare AnyWare  Version 3.00
           NetWare ASCOM IV for NACS Version 1.41


Problem Description:

The present version of NASI Application Installation Program (INSTAPPS) has
a limit  on  the  number  of users that can be added  to  the  UART  file. 
 In different  situations, it has been possible to get from 40 to 56 users 
added to  the UART file. When an attempt is made to add more users,  the 
following error message displays.

    *** ERROR WRITING TO UART FILE.  THE DISK OR DIRECTORY ***
    *** MAY BE FULL, OR THE UART FILE MAY BE CORRUPTED.    ***
    *** DETERMINE THE CAUSE OF THE FAILURE AND REINSTALL   ***
    *** THE PRODUCT USERS AFTER DELETING OLD UART FILE.    ***

    Press <Esc> to exit to DOS ...


Problem Resolution:

This  Product Temporary Fix resolves the above problem.  It allows  over 
400 users to be added.
ÿ