TABLE OF CONTENTS

The files on this diskette are use to generate the following for the
Racal InterLan NI9210 Ethernet Controller:
-   Workstation Shell for Novell Netware v2.15
-   Server Driver for Novell Netware v2.15

The following files are included: 

  FILE           SIZE    DATE     TIME
  NAME         IN BYTES  STAMP    STAMP
------------     ----   -------   -----
A9210DRV OBJ     8723   1-21-90   9:44a
B9210DRV OBJ     8723   1-21-90   9:46a
C9210DRV OBJ     8723   1-21-90   9:47a
D9210DRV OBJ     8723   1-21-90   9:48a
E9210OS  LAN      681   1-21-90   9:11a
E9210SH  OBJ     9831   1-22-90   9:39a
E9210SH  LAN      234   1-22-90  11:29a

==============================================
============================

NETWARE SETUP STEPS FOR THE RACAL INTERLAN NI9210

STEP 1: CONFIGURING THE RACAL INTERLAN NI9210 

The Racal InterLan NI9210 is configured through the use of the
Reference Disk that is shipped with your microchannel system. The files 
NI9210.16 (for NI9210s with 16KB buffer) and NI9210.64 (for NI9210s with
64KB buffer) contain the information necessary to describe the configuration
of the card.
==============================================
============================

STEP 2: INSTALLING THE DRIVER FILES FOR THE RACAL INTERLAN
NI9210

      1. Copy the E9210SH.LAN file to the SHGEN-1 diskette for "floppy
         disk" method or to the SHGEN-1 sub-directory if you are using
         "harddisk" or "network" method. It is a Shell driver description
         file.
      2. Copy the Operating System driver description file E9210OS.LAN to
         the AUXGEN diskette for "floppy disk" method or to the AUXGEN
         sub-directory if you are using "harddisk" or "network" method.
         But if you are generating an External Bridge, the E9210OS.LAN file
         should be copied to the BRGEN-1 diskette or the BRGEN-1
         sub-directory.
      3. For the "floppy disk" method a blank disk needs to be formated
         and labeled.  Use the DOS LABEL command to label the diskette
         as LAN_DRV_003.  If the "harddisk" or "network" method is being
         used the a subdirectory under the NETWARE directory must be
         created.  Use the DOS MKDIR command to create the LAN_DRV_.003
         subdirectory.  Copy the *.OBJ files to either the labeled diskette
         or subdirectory depending on which method is being used.
      4. Run NETGEN and select the correct driver from the list of LAN adapter 
         options to generate the file server operating system.
      5. Run SHGEN and select the correct driver from the list of LAN adapter
         options to generate the workstation shell.
      6. Run BRGEN and select the correct driver from the list of LAN adapter
         options to generate the external bridge software.
==============================================
============================
                !!!!!!!!!!!!!  IMPORTANT  !!!!!!!!!!!!!

     Note: The NI9210 is a MCA adapter board and is therefore self-
           configuring. Always choose option 0: Self Configuring when
        generating the shell IPX.COM.

==============================================
============================

RACAL INTERLAN CUSTOMER SUPPORT AND ORDERS FOR MANUALS,
DRIVERS OR
ADDITIONAL PRODUCTS.

First line support for your Racal InterLan products should be 
obtained from your VAR or distributor who sold you the product. If
additional assistance is needed ... 

 - for technical or installation assistance
 - for additional manuals or Racal InterLan products
 - for general product information

... please call Racal InterLan in Massachussetts (U.S.A)  at:

       1-800-LAN TALK or 1-508-263-9929

FAX services are available at:  1-508-263-8655
TELEX services are available at: 6200 4561 
==============================================
==========================

DRIVER UPDATES THROUGH THE RACAL INTERLAN ON-LINE BULLETIN
BOARD SERVICE

Racal InterLan maintains a bulletin board service for our customers
that allows the electronic downloading of drivers, product information
revisions and updates for all of our products.

This bulletin board can be accessed as follows

    Phone: 1-508-264-4345     Modem Settings: 8/N/1
    300, 1200 or 2400 baud.   XMODEM protocol

There is an index of all the files contained on the board. To access this
index, use choice 1 then choice 6 from the main menu.
==============================================
============================