ES3210 Newtare 386 3.0 Server Driver

Table of Contents

       Name         Size     Date    Time

   !RII0101 CFG     6306   3-09-90   8:26a
   ES3210   LAN    11378   6-19-90  10:11a


INSTALLING THE ES3210 NETWARE 3.0 SERVER DRIVER - ES3210.LAN

1) Copy the RII0101.CFG configuration file into the configuration
   directory on your EISA computer. A detailed procedure is included
   in the ES3210 Installation Manual(950-1278-00 AA). A summary 
   follows:

       a) Copy A:!RII0101.CFG C:\<directory name>
       b) Change to configuration utility directory with CD command.
       c) Type: CF <RET>  - where <RET> means ENTER key.
       d) When the utility is up it will display all the cards installed 
          in your EISA machine. Select the slot with the words Racal 
          InterLAN ES3210 Ethernet Controller.
       e) Type: CTRL-D to enter change mode.
       f) Press ENTER when the cursor is at the parameter to be changed.
       g) Remember the slot the card was installed in if there is more
          than one ES3210. This will be needed later when loading the 
          drivers. 
       h) When finished configuring save the configuration and exit the
          configuration utility.

2) Bring up the file server.

3) When the : appears type: 

        LOAD <directory name>ES3210.LAN <RET> 

    where <directory name> is the directory name where the *.LAN files are 
    kept, i.e. C:\NW386\. <RET> stands for the ENTER key.

4) You will be prompted for interrupt value, DMA channel and I/O 
   base address.( Remember those things you were told to write down
   in step 1 above?). 

5) Finally you must bind the driver to a protocol by typing:

       BIND ES3210 TO <protocol> <RET>

    where <protocol> will usually be IPX and <RET> is again the enter
    key.

6) You will be prompted to enter a network number. Enter a number and
   the server is ready to communicate with workstations.


If you need HELP

  Your first line of Assistance and service for this product is available 
  from your dealer or distributor that sold you the product. If you are 
  unable to obtain the needed assistance, please contact Racal Interlan 
  at:
  
        1-800-LAN-TALK

  or outside the United States:
  
        1-508-263-9929.

  Please have your product name(ES3210) and serial number ready when you 
  call us. 

Racal Bulletin Board Update/Technical Information Service 

  The I.B.B.S. is a dial up service that provides subscribers with 
  up-to-date marketing and technical information about Racal Interlan
  products.  In addition, up-to-date DOS, Novell, LAN Manager, Banyan,
  3COM and other device drivers are available.  The service is available 
  23 hours a day.  Individual dial up service is also available.  Contact
  Racal Interlan at 1-800-LAN-TALK or 508-263-9929 for complete details.