1. Table of Contents Listed below are Novell developed LAN drivers for 3Com's 3C501, 3C503, 3C505 (2012), and 3C523 LAN adapters. -3C501 NetWare v2.12 server and workstation drivers are provided for the 3Com 3C501 Etherlink 8 bit LAN adapter card. Note: These drivers have not been certified with current versions of NetWare, but are provided as a service to Novell customers. Listing of the 3C501 driver's file are as follows: File Name Size in Bytes Date Stamp Time Stamp 3C501.LAN 1151 10/11/90 11:51a S3C501.LAN 1133 10/10/90 4:29p A3C501.OBJ 4107 10/05/88 10:40a B3C501.OBJ 4107 10/05/88 10:40a C3C501.OBJ 4107 10/05/88 10:40a D3C501.OBJ 4107 10/05/88 10:41a S3C501.0BJ 4309 10/03/88 1:56p -3C503 NetWare v2.15 server driver with AppleTalk 1, server driver with AppleTalk 2, and workstation driver are provided for 3Com's 3C503 8 bit LAN adapter card. Listing of the 3C503 drivers' files are as follows: -3C503 with AppleTalk 1 File Name Size in Bytes Date Stamp Time Stamp 3C503A1.LAN 649 10/10/90 4:27p A3C503A1.OBJ 6451 08/17/90 10:54a B3C503A1.OBJ 6451 08/17/90 10:55a C3C503A1.OBJ 6451 08/17/90 10:56a D3C503A1.OBJ 6451 08/17/90 10:57a -3C503 with AppleTalk 2 File Name Size in Bytes Date Stamp Time Stamp 3C503A2.LAN 651 08/30/90 8:34a A3C503A2.OBJ 6584 08/17/90 11:02a B3C503A2.OBJ 6584 08/17/90 11:03a C3C503A2.OBJ 6584 08/17/90 11:04a D3C503A2.OBJ 6584 08/17/90 11:05a -3C503 Dedicated IPX (workstation shell driver) File Name Size in Bytes Date Stamp Time Stamp S3C503.LAN 395 10/10/90 10:06a S3C503.OBJ 6313 05/07/90 1:11p -3C505 (2012) NetWare v2.15 server driver with AppleTalk 1 and server driver with AppleTalk 2 are provided for 3Com's 3C505 (2012) 16-bit LAN adapter card. Listing of the 3C505 (2012) drivers' files are as follows: -3C505 with AppleTalk 1 File Name Size in Bytes Date Stamp Time Stamp 3C505A1.LAN 581 08/30/90 8:34a A3C505A1.OBJ 10037 08/20/90 11:55a B3C505A1.OBJ 10037 08/20/90 11:57a C3C505A1.OBJ 10037 08/20/90 11:58a D3C505A1.OBJ 10037 08/20/90 12:00p -3C505 with AppleTalk 2 File Name Size in Bytes Date Stamp Time Stamp 3C505A2.LAN 581 08/30/90 8:34a A3C505A2.OBJ 10167 08/20/90 12:01p B3C505A2.OBJ 10167 08/20/90 12:02p C3C505A2.OBJ 10167 08/20/90 12:04p D3C505A2.OBJ 10167 08/20/90 12:05p -3C523 NetWare v2.15 server driver with AppleTalk 1, and workstation driver are provided for 3Com's 3C523 MCA 16-bit LAN adapter card. Listing of the 3C523 drivers' files are as follows: -3C523 with AppleTalk 1 File Name Size in Bytes Date Stamp Time Stamp 3C523A1.LAN 1318 08/30/90 8:34a A3C523A1.OBJ 9136 07/31/90 9:13a B3C523A1.OBJ 9136 07/31/90 9:13a C3C523A1.OBJ 9136 07/31/90 9:13a D3C523A1.OBJ 9136 07/31/90 9:13a -3C523 Dedicated IPX (workstation shell driver) File Name Size in Bytes Date Stamp Time Stamp S3C523.LAN 116 10/10/90 10:05a S3C523.OBJ 7847 09/07/90 3:32p 2. NetWare Setup Steps a. Configuring the LAN adapter or controller card For setup and installation instructions for the 3COM adapter cards, please refer to the installation manual that accompanied your 3Com LAN card. b. Configuring and installing the drivers. i. Copy the workstation driver description file {S3C*.LAN} file to the SHGEN-1 diskette for "floppy disk" method or to the SHGEN-1 sub- directory if you are using the "harddisk" or "network" method. ii. Copy the Operating System driver description file {3C*.LAN} to the AUXGEN diskette for "floppy disk" method or to the AUXGEN sub- directory if you are using "harddisk" or "network" method. For generating an External Bridge, the {3C*.LAN} file should be copied to the BRGEN-1 diskette or the BRGEN-1 sub-directory. iii. For the "floppy disk" method a blank disk needs to be formatted and labeled. Use the DOS LABEL command to label the diskette as {LAN_DRV_180}. If the "harddisk" or "network" method is being used a subdirectory under a NetWare generation or work directory must be created. Under this generation directory use the DOS MKDIR command to create the {LAN_DRV_.180} Copy the *.OBJ files to either the labeled diskette or subdirectory depending on which method is being used. iv. Run NETGEN and select the correct driver from the list of driver options to generate the file server operating system. v. Run SHGEN and select the correct driver from the list of LAN adapter options to generate the workstation shell. vi. Run BRGEN and select the correct driver from the list of LAN adapter options to generate the external bridge software. 3. Customer Support -For technical support and help with problems installing these Novell developed LAN drivers, call Novell's Technical Support in Provo, Utah at 800-LANSWER or (801) 429-5588. 4. Driver Updates/ -Driver updates can be down loaded from CompuServer on Novell's bulletin board, NetWire. You can also ask your reseller for a copy of any driver that has been loaded on NetWire. 5. Installation Manuals -Most of the driver installation manual are included in the NetWare 386 v3.1 software kit. Additional available manual kits may be ordered under part number 183-000246-001.