Novell Message Librarian Data File Version 1.00
COPYRIGHT (c) 1985 by Novell, Inc.  All Rights Reserved.
<<< BAD MESSAGE >>>
BROLLFWD-6.10b-1: This workstation has insufficient memory to complete the operation.
BROLLFWD-6.10b-2: The log file was created at %s.
BROLLFWD-6.10b-3: An internal program error has occured.
BROLLFWD-6.10b-4: The specified owner name is invalid.
Please reenter the owner name: 
         
 DATA: 
 KEY: 
The default value is 40 bytes.
 [/d:nn] [/t:nnnnn] [/k:nnnn] [/h] [/v] [/l]
 [/o:owner name]
   /d specifies the BROLLFWD data buffer size in kilobytes to retrieve the BTRIEVE records.
   /t specifies the length of the data in bytes to be printed.
   /k specifies the length of the key in bytes to be printed.
   /h specifies printing the data and key in hexadecimal numbers.
The default prints the data and key in decimal numbers.
   /v specifies printing the operation listing in verbose mode.
The default prints the listing in normal mode.
   /l specifies generating a listing of the operations Btrieve is rolling forward.
   /o specifies the owner name.
BROLLFWD-6.10b-21: The utility is unable to open %s. The number of the applicable system error code is %d.
BROLLFWD-6.10b-22: An error occurred while the utility was reading %s.
BROLLFWD-6.10b-23: File %s ended unexpectly during the roll forward process.
BROLLFWD-6.10b-24: The utility could not find the log file header information in %s.
BROLLFWD-6.10b-25: %s contains incorrect syntax in the log file header.
BROLLFWD-6.10b-26: Btrieve operation %d was unsuccessful. The number of the applicable Btrieve status code is %3d
BROLLFWD-6.10b-27: The utility could not find %s in the BLOG.CFG file.
BROLLFWD-6.10b-28: The record size of the Btrieve file %s exceeds the size of the data buffer specified with the /d parameter.
BROLLFWD-6.10b-29: The length of the data to be printed, specified with the /t option, is invalid. Valid data lengths range from 1 through the value of the data buffer size specified with the /d option.
BROLLFWD-6.10b-30: The length of the key to be printed, specified with the /k option, is invalid. Valid lengths for printing keys range from 1 through 255 characters.
BROLLFWD-6.10b-31: %d entry in the log file has been processed.            
BROLLFWD-6.10b-32: %d entries in the log file have been processed.         
Btrieve file: %s 
Log file: %s
Entry              Key                  Data Length
         Operation          Position
Entry              Key                  Data Length                     Time
         Operation          Position               Network Address
 User Name: %s
The operations completed successfully. 
BROLLFWD-6.10b-40: The Btrieve file %s is currently being rolled forward, using the log file %s.
Btrieve Roll Forward - Version 6.10b
Copyright (c) 1989 - 1993 Novell, Inc.
All Rights Reserved.
BROLLFWD-6.10b-42: The disk is full.
BROLLFWD-6.10b-43: The utility started the roll forward process at %s.
%08u %9u %8d 
%08x %9x %8x 
%1x%1x
           
%10u 
%10x 
 %-20s %-20s
%02x 
%02x  
Usage: 
 BROLLFWD {<btrieveFileName> | @<listFile> | /a} 
Valid data lengths range from 1 through the value of the data buffer size specified with the /d option.
The default value is 8 kilobytes.
The default value is 10 bytes.
Valid lengths for printing keys range from 1 through 255 bytes.
The valid range is from 1 through 64 kilobytes.