=================================================================
NOVELL GROUPWISE 4.1A                              UPDATE PATCH 2
=================================================================

This patch is intended for Novell GroupWise 4.1a for Windows that
has already had Update Patch #1 applied to it. This patch cannot
be used with any other version of GroupWise.  This patch addresses
issues with running under Windows 95 and some commonly reported
problems.


--------------------------------
Instructions
--------------------------------

The patch consists of the following files:
     
  GWUSC2.TXT (this file)
  GWPAT2.EXE

Copy these files to a workstation or network directory. You will
need at least 15M of free space on the drive for use as workspace
for the patch utilities.  It will be freed when the patch is 
complete.

You will need network WRITE and DELETE access rights to the 
directory containing the primary domain to be patched.

You should backup the domain to be updated before applying the
patch.  If the patch is interrupted you will then be able to 
restore the domain from the backup and start again.  If you 
don't backup the domain you may have to reinstall the original
4.1a version and re-apply patch #1 before attempting to apply
patch #2.

The patch process may take from 15 to 30 minutes depending on the
speed of your machine, the speed of your disk and the speed of
your network.


To apply the patch:

     1    Set your current working directory to the directory
          containing the patch files listed above.

     2    At the DOS prompt type:
	
          GWPAT2

          This file is a self extracting EXE that extracts the
          following files:

            PATCH.EXE
            SPAN.EXE
            SPANX.EXE
            SQP.EXE
            KDEL.EXE
            FIXDATE2.EXE
            DOPATCH.BAT
            DOSPNSET.BAT
            OFWIN41.BAT
            WNUSID41.BAT
            GWUSC2.RTP
            OFWIN41.RTP
            WNUSID41.RTP
	

     3    At the DOS prompt, enter the following command:

          DOPATCH primarydomain

          where primarydomain is the drive and directory of a 
          primary domain.  For example, if the primary domain is
          J:\HEADQ, you would enter the following command:

          DOPATCH J:\HEADQ


     4    After applying the patch, distribute the updated
          software in the normal way:

          a. Using the AD.EXE Software Management option (under
             the Tools menu), copy the updated software to 
             other domains and/or post offices.

          b. After copying the software to a post office, go into
             Windows and run SETUPWIN /A.

--------------------------------
Troubleshooting
--------------------------------

If PATCH.EXE cannot locate the correct files to patch, the
following message will be displayed:

     Warning wpt0015: Old File does not exist

This may indicate one or more of the following situations:

     *    You have previously deleted one or more files from the
          original GroupWise 4.1a installation.

     *    You are attempting to patch the wrong version of
          GroupWise. 

You may need to reinstall the original GroupWise 4.1a files and
apply Update Patch #1 before applying this patch.

If PATCH.EXE determines that a file does not need to be patched,
it will report the following message:

     New Version of File FILENAME already exists.

This may indicate that you have already applied the patch.
PATCH.EXE has verified that your software is up-to-date; you do 
not need to take further action.

--------------------------------
Files Modified
--------------------------------

In the WPOFFICE\OFWIN40 directory:

     README.WIN
     SETUP.DAT
     SETUPUS.EXE
     OFUS0024.VER (added)
     WPOF0024.VER (added)


In the WPOFFICE\OFWIN40\SETUP directory (containing compressed
span set files):

     OFWIN41.(S01,S02,S03,S04,SPN)
     WNUSID41.(S01,S02,S03,S04,SPN)

Within the span sets, the following GroupWise files
have been modified:

OFWIN.EXE   
OFWINFIL.EXE
OFWINENG.DLL
VEWIN.EXE   
VEWINFIL.EXE
NTWIN.EXE
MAPI.DLL    
WPROF.DC    
WPOFUS.DLL  
WPOFUSM.HLP 
WPVEUS.DLL
README.WIN
UPGRDEGW.WCM (new)

The following shared code files have been modified:

SHX20US.DLL 
SHWIN20.DLL 
SHWINB20.DLL
SHWINX20.DLL
SPWIN20.EXE 
OFCH41.DLL
OFENUS.DLL
GWUE41US.DLL (new)