Nokia 121 Programming

FEATURES

Test Mode: No

NAM: You can change it only with the Keyboard.

ESN: You can´t change It

NAM PROGRAMMING INSTRUCTIONS

The Nokia 121 series handportable CMT uses an EEPROM NAM that can be programmed directly from the standard user keypad. In order to access the NAM, you must enter the special access code currently programmed into the phone.

Once the programming mode is accessed, NAM parameters are loaded by entering them into the display and "storing" them in selected memory locations. Be sure to obtain all parameters before proceeding.

ACCESS NAM PROGRAMMING MODE:

1. Turn the phone on.
2. Enter the NAM access code. Factory default is: * 60312 # 1 2 3 4 5
3. Enter [M] 00.
4. Verify that "STORE NOT DONE" appears in the display.
   If "NOT ALLOWED" appears, check to see if you have entered the access code correctly.

Note: If the correct access code is unknown, reprogramming must be referred back to the wholesale purchaser of the phone.

MEMORY LOCATIONS

There are four memory locations, called 01 to 05, that contains the configuration info of the phone.
The data of each memory location has a "*" separator.

Memory Location 01
Explanation	Values	Default
Emergency number (such as 911 or *911) followed by the pound (#) key	any phone number	9 1 1 # * 9 1 1
Language code: 0 = English, 1 = French, 2 = Spanish.	0-2	1
Four digit lock code	0000-9999	1234
EXAMPLE: 9 1 1 # * 9 1 1 # 0 * 1 2 3 4 Enter [M] 01 [M].

Memory Location 02 Primary NAM
Explanation	Values	Default
ENTER MOBILE PHONE NUMBER Enter the correct 10 digit phone number. If desired, press the [ABC] key and enter a name of up to 16 characters. Note that the zero (0) key can be used to insert a blank space. After the name is entered, press [ABC].	any phone number
EXAMPLE: 908 567621 Enter [M] 02 [M].

Memory Location 03 Setup Primary NAM
Explanation	Values	Default
System ID	00-99	34
Access Overload Class		1
Access Method Local Use Mark		1
Initial Paging Channel	000-999	334 (323 Spain)
Group ID Mark
?
EXAMPLE: 3 4 * 1 * 1 * 3 3 4 * 1 5 * 1 5 Enter [M] 03 [M].

Memory Location 04 Optional NAM
Explanation	Values	Default
ENTER MOBILE PHONE NUMBER Enter the correct 10 digit phone number. If desired, press the [ABC] key and enter a name of up to 16 characters. Note that the zero (0) key can be used to insert a blank space. After the name is entered, press [ABC].	any phone number
EXAMPLE: 908 567621 Enter [M] 04 [M].

Memory Location 05 Setup Optional NAM
Explanation	Values	Default
System ID	00-99	34
Access Overload Class		1
Access Method Local Use Mark		1
Initial Paging Channel	000-999	334 (323 Spain)
Group ID Mark
?
EXAMPLE: 3 4 * 1 * 1 * 3 3 4 * 1 5 * 1 5 Enter [M] 05 [M].

VERIFY NAM INFORMATION:

Press the up [^] and down [v] key and verify that the memory locations from above (01 through 05) had the correct information.
To exit the programming mode, power the phone off then back on. If NAM ERROR or NO SVC appears on the display, programming was done incorrectly and must be repeated.

Note: if NAM ERROR appears on the display check the memory locations for bad values.