1	JetDirect
2	General
3	NetWare
4	TCP/IP
5	DLC/LLC
6	EtherTalk
7	PJL Settings: Controls the JetDirect card's use of PJL (all recommended).  Toner Notification: Controls whether users get advanced notice when toner is getting low.
8	Frame Types: Controls the frame types that the card and peripheral should use.
9	Protocol Stacks: Controls the protocol stacks in which the JetDirect card and peripheral can receive print data.
10	Restart NetWare Server Connection: Restarts the JetDirect connection with file server.  Complete Re-initialization: Re-boots the JetDirect card (same as printer power cycle).  
11	Broadcast Rate (sec.): Controls the frequency of "SAPs" with NetWare bindery.  Job Poll Rate (sec.): Controls frequency in which the JetDirect peripheral will check NetWare queues for new print jobs.
12	The the source routing option for the card.  You may also change the default address for the card.  ONLY change the address when absolutely necessary.
13	  Reset Card to Factory Defaults: Clears all information from card (Includes name).
14	Warning:  Changing the frame type could result in a loss of communication with the printer.  Do you want to continue?
15	Reset JetDirect Card
16	Advanced
17	Time Intervals
18	Protocol Stacks
19	Frame Types
20	Firmware Date: %s
21	Token Ring
22	Packets Received
23	Packets Transmitted
24	Name: %s
25	Date: %s
26	Version: %s
27	PCL
28	PostScript
29	Engine Page Count: %d
30	Firmware Date: %s
31	Frame Types
63	Diagnostics not available
64	Unicast Packets Received:  %10lu
65	Total Packets Received:  %10lu
66	Bad Packets Received:  %10lu  (%2d.%d%%)
67	Framing Errors Received:  %10lu  (%2d.%d%%)
68	Line Errors Received:  %10lu  (%2d.%d%%)
69	Burst Errors Received:  %10lu  (%2d.%d%%)
70	FS Set Errors Received:  %10lu  (%2d.%d%%)
71	Unicast Packets Transmitted:  %10lu
72	Total Packets Transmitted:  %10lu
73	Transmission Errors:  %10lu  (%2d.%d%%)
74	Transmit Late Collisions:  %10lu  (%2d.%d%%)
75	Retransmissions:  %10lu  (%2d.%d%%)
76	File Server:  ????
77	File Server:  %s  (Not Attached)
78	File Server:  %s
79	Connection Status(0x%02X): %s
80	NCP Status(0x%02X): %s
81	Queue Name:  Unknown Queue(s)
82	Queue Name:  %s
83	Queue Name:  %s  (Error)
84	Print Server:  %s
85	Printer Number:  %d
86	Frame Type:  %s
87	Network:  %s
88	Network Hops:  %u
89	Frame Counts
90	Ethernet_802.2 (EN_8022):  %10lu
91	Ethernet_Snap (EN_SNAP):  %10lu
92	Ethernet_II (EN_II):  %10lu
93	Ethernet_802.3 (EN_8023):  %10lu
94	Token-Ring (TR_8022):  %10lu
95	Token-Ring_Snap (TR_SNAP):  %10lu
96	Server Status:  %s
97	Printer Status:  %s
98	Control Panel
99	BOOTP
100	Printer Status:  %s
101	System Location:  %s
102	System Contact:  %s
103	Host Name:  %s
104	Config Source:  %s
105	IP Address:  %s
106	Network Mask:  %s
107	Default Gateway:  %s
108	Idle Timeout(secs):  %lu
109	System Log Server:  %s
110	Syslog Facility:  %s
111	BOOTP Server:  %s
112	Connections
113	Connections Accepted:  %lu
114	Connections Denied:  %lu
115	Connections Aborted:  %lu
116	Connections Killed:  %lu
117	Byte Counts
118	Bytes Received:  %lu (current connection)
119	Bytes Sent:  %lu (current connection)
120	Total Bytes Received:  %lu (since reset)
121	Total Bytes Sent:  %lu (since reset)
122	TCP Statistics
123	%lu segments received
124	%lu segments received in error
125	%lu segments received in order
126	%lu segments received out of order
127	%lu zero window probes
128	%lu segments discarded
129	%lu segments sent
130	UDP Statistics
131	%lu datagrams received and delivered
132	%lu discarded due to no destination application
133	%lu discarded due to other reasons
134	%lu datagrams sent
135	IP Statistics
136	%lu datagrams received
137	%lu discarded due to IP header errors
138	%lu discarded due to address error
139	%lu discarded due to an unknown protocol
140	%lu datagram transmission requests
141	%lu discarded due to lack of resources
142	%lu discarded because no route to destination
143	%lu valid routing entries discarded
144	ICMP Statistics
145	%lu messages received
146	%lu messages received with ICMP-specific errors
147	%lu destination unreachable
148	%lu time exceeded
149	%lu source quench
150	%lu redirect
151	%lu echo
152	%lu messages sent
153	%lu destination unreachable
154	%lu time exceeded
155	%lu echo reply
156	SNMP Statistics:
157	%lu packets received
158	%lu GetRequests
159	%lu GetNexts
160	%lu SetRequests
161	%lu bad community names
162	%lu operations prevented by SNMP community name
163	%lu packets sent
164	%lu traps
165	Flash Download
166	Steps:  1) Click on the "+" next to the printer component / environment you wish to gather diagnostics information.  2) Select "Expand All" button to view all values, or "Collapse All" to hide them.
167	Unknown
168	Printer IO Type:  %s
169	Network IO Type:  %s
170	  3) Select "Refresh" button to update all values. 4) Select "Save" button to save this information.
171	Printer
172	MIO Revision: %d.%d
173	MIO Revision: Unknown
174	Diagnostics
175	JetDirect IO Ports: %s
176	Version: %s
177	JetDirect Model: %s
178	Network Number: %s
179	Node Address: %s
180	&Collapse All
181	&Expand All
182	JetDirect
183	Asset Number: %s
184	Serial Number: %s
185	SIMM Modules
186	Slot %d: %s: %ld MB
187	Slot %d: %s
188	Empty
189	Unknown
190	Unsupported
191	Read Only Memory
192	Volatile RAM
193	Non-Volatile RAM
194	Flash Memory
195	Disk Drive
196	RAM/ROM
197	Input Paper Device
198	Output Paper Device
199	Text Files (*.txt)|*.txt|All Files (*.*)|*.*|
200	txt
201	jetadmin.txt
223	Restart Server Connections?
224	HP JetAdmin
225	JetDirect connections to file servers restarted.
226	Re-initialize card completely?
227	JetDirect card re-initialized.
228	Reset card to factory defaults?
229	JetDirect configuration set to factory defaults.
230	Incorrect address specified.
231	Internal Error: Settings not saved.
232	Internal Error: LAA not changed
233	Diagnostics
234	Type: Bindery
235	Type: Remote Printer
236	Type: NetWare Directory Services
237	NDS Status(0x%02X): %s
238	Connections
239	Queues
240	No Such Queue or Printer Object
241	Authentication Failed
242	Resolve Name Failed
243	No Licenses
244	Connected To File Server
400	Status Not Available
401	NetWare Protocol Not Configured
402	Configuration Error
403	Configuration Channel Busy
404	Initializing Interface
405	Shutdown
406	Trying to Connect to Print Server
407	Unable to Find Print Server
408	Unable to Connect to Print Server
409	Printer Number in Use
410	Printer Number Not Defined
411	Connected to Print Server
412	Disconnecting from Print Server
413	Trying to Connect to File Server
414	Unable to Find File Server
415	Unencrypted Password Error
416	Print Server Not Defined
417	Password Error
418	No Queue Assigned
419	Connected to File Server
420	Disconnecting from File Server
421	Unable to Connect to File Server
422	Unable to Negotiate Buffer Size
423	Unable to Log Into File Server
424	Unable to Set Password
425	Unable to Attach to Queue
426	Connecting to File Server
427	Error Connecting to File Server
428	Out of Buffers
429	Connection to Print Server Failed
430	Unable to Reserve Printer Number
431	Print Server Requested Disconnect
432	Unexpected Data from Print Server
433	Listening for Connection
434	Connected to Client/Server
435	NetWare Protocol is Disabled
436	NetWare Protocol Not in use
438	Maximum File Servers Exceeded
439	Cannot login
440	Cannot Authenticate
441	Cannot Change Password
442	Cannot Read Server Key
443	Cannot Read Print Server Key
444	Cannot Resolve Server Name
445	Cannot Get Server Address
446	Cannot Resolve Print Server Name
447	Cannot Read Print Server Printer List
448	Cannot Read Printer Notify List
449	Cannot Read Printer Queue List
450	Cannot Resolve Printer Object
451	Invalid Server Version
452	No Printer Objects Assigned
453	Maximum Printer Objects Assigned
454	No Queues Objects Assigned
455	Maximum Queue Objects Assigned
456	Cannot Find Tree
457	Cannot Change Connection State
458	Cannot Resolve Queue
459	Cannot Read Queue Host
500	Ethernet_802.2
501	Ethernet_Snap
502	Ethernet_II
503	Ethernet_802.3
504	Token-Ring
505	Token-Ring_Snap
506	Token-Ring Source Routing
507	Token-Ring_Snap Source Routing
1000	MS Sans Serif
1001	NetWare Directory Services
1002	NDS Status (NDS):
1003	Not Configured.
1004	Not Available.
1005	Cannot Locate NDS Tree
1006	Cannot Authenticate into NDS Tree
1007	Cannot Find NDS Print Server Object
1008	Cannot Locate NDS Print Queues
1009	Cannot Locate NDS Printer Objects
1010	Not Supported.
1011	To enable NDS support, both a Tree Name and a context must be specified.
1012	NWADMIN.EXE must be used to configure the file server for the NDS support in the JetDirect.  Print queues specified in JetAdmin will be serviced through bindery services.
1013	Tree: %s
1014	Print Server Context: %s
1015	Print Server Object: %s
1016	Printer may be offline
1017	File server timeout
1018	File server downed
1019	Intruder lockout
1020	No queue job
1021	Queue error
1022	Queue on hold
1023	No such object
1024	Intermediate error
1025	Printer Name: %s
1026	Phase: %s
1027	Network Number: %s
1028	Node Number: %s
1029	Zone: %s
1030	Server Address: %s
1031	Peer-To-Peer
1032	Connection to JetDirect card lost.  Properties will now be closed.
1033	Please turn off the printer for the reset to take effect.  Properties will now be closed.
1034	ANSI_CHARSET
1035	6
61440	Open
61441	Save As
61442	All Files (*.*)
61443	Untitled
61588	Linked %s
61589	Unknown Type
61696	Invalid filename.
61697	Failed to open document.
61698	Failed to save document.
61699	Save changes to %1?
61700	Failed to create empty document.
61701	The file is too large to open.
61702	Could not start print job.
61703	Failed to launch help.
61704	Internal application error.
61705	Command failed.
61706	Insufficient memory to perform operation.
61712	Please enter an integer.
61713	Please enter a number.
61714	Please enter an integer between %1 and %2.
61715	Please enter a number between %1 and %2.
61716	Please enter no more than %1 characters.
61717	Please select a button.
61718	Please enter an integer between 0 and 255.
61719	Please enter a positive integer.
61728	Unexpected file format.
61729	%1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730	Destination disk drive is full.
61731	Unable to read from %1, it is opened by someone else.
61732	Unable to write to %1, it is read-only or opened by someone else.
61733	An unexpected error occurred while reading %1.
61734	An unexpected error occurred while writing %1.
61829	%1\nUnable to register document.\nThe document may already be open.
61836	Unable to read write-only property.
61837	Unable to write read-only property.
61840	Unable to load mail system support.
61841	Mail system DLL is invalid.
61842	Send Mail failed to send message.
61984	OK\n50
61985	Cancel\n50
61986	&Apply\n50
61987	&Help\n50
61988	Close