6	Untitled
100	Failure to initialize OLE. Make sure that the OLE libraries are the correct version.
128	PhotoImpact
129	\nUntitled-\nPI3\n\n.bmp\nPI3.Image\nUlead PhotoImpact 3.0 Image
130	iedit3.cfg
1000	Send an object to the bottom layer\nSend to Bottom
1001	Send an object down one layer\nSend to Back
1002	Bring an object up one layer\nBring to Front
1003	Bring an object to the top layer\nBring to Top
1010	Make a new selection, or change an existing selection\nMake a new selection, or change an existing selection
1011	View other options\nOptions Menu
1012	Define the rotation of an object\nrotate or flip
1013	Select the shape of a selection area\nSelect the shape of a selection
1014	Choose the magnification of an image\nView
1017	Determine the range of colors to select\nDetermine the range of colors to select
1018	Click or drag a line to make a selection \nClick or drag a line to make a selection 
1019	Click or drag around an area to make a selection\nClick or drag around an area to make a selection
1023	Make a selection snap to edges\nMake a selection snap to edges
1024	Determine the range of sensitivity to snap to\nDetermine the range to snap to (1..10 pixels)
1034	Create a selection area based on a fixed size\nCreate a selection based on a fixed size
1036	Width of a selection area\nWidth of a fixed selection
1037	Height of a selection area\nHeight of a fixed selection
1040	\nColor-1
1041	\nColor-2
1042	\nColor-3
1043	\nColor-4
1044	\nColor-5
1045	\nColor-6
1046	\nColor-7
1047	\nColor-8
1048	\nColor to paint with
1050	Show the entire image at actual size (zoom ratio 1)
1051	Show the entire image at a zoom ratio that can fit in the workspace
1053	Change the zoom ratio to view an image\nZoom Ratio
1055	Enlarge or shrink an object (hold shift to keep the aspect ratio)\nResize
1056	Adjust the slant of an object\nSlant
1057	Distort the shape of an object\nDistort
1058	Change the perspective of an object\nPerspective
1059	Use a line to rotate an object horizontally to\nRotate by Horizontal Line
1060	Use a line to rotate an object vertically to\nRotate by Vertical Line
1061	Rotate an object freely\nRotate Freely
1062	Rotate an object clockwise by degrees\nRotate Clockwise
1063	Rotate an object counterclockwise by degrees\nRotate Counterclockwise
1065	Specify the degree to rotate by\nRotate by Degree
1074	Choose a brush shape\nChoose a brush shape
1075	Set the size of the brush head\nSet the brush head size
1077	Save the current options to the My Gallery\nAdd tool attributes to the My Gallery
1081	Set the degree of transparency when applying color onto an image\nControl paint transparency (0..99%)
1082	Set the density of color when painting\nSet the space between paint drops (1..300%)
1083	Adjust how much the color blends along the edges of an image\nSoften paint edges (0..100%)
1084	Control how color is spread over an image\nControl paint distribution (1..100)
1085	Control how much color is applied\nControl brush pressure (1..100)
1088	Control the way paint merges with an image\nControl how paint merges
1091	Set the strength of the applied effect\nSet strength of effect
1094	View various painting mode commands\nChoose a painting mode
1095	View various cloning mode commands\nChoose a cloning mode
1111	\nDodge
1112	\nBurn
1113	\nBlur
1114	\nSharpen
1115	\nSmudge
1120	\nPaintbrush
1121	\nAirbrush
1122	\nCrayon
1123	\nCharcoal
1124	\nChalk
1125	\nMarker Pen
1130	\nImage Clone
1131	\nObject Clone
1150	Continue to draw
1151	Load a file to be cloned\nLoad a file to clone
1160	Choose a color tint for the mask\nChange mask color
1170	\nStandard Eraser
1171	\nColor Eraser
1172	Change a color to this color\nChange to this color
1173	Choose the color to change\nChange from this color
1174	Specify the color to erase to\nChange to this color
1200	Specify the font type\nSpecify the font type
1201	Specify the font size\nSpecify the font size
1202	Specify the text color\nSpecify text color
1203	Specify text shadow\nSpecify shadow color
1204	Specify the font style\nSpecify the font style
1205	Specify how text is displayed\nSpecify how text is displayed
1206	Choose to edit a new path or an existing path\nEdit new path or existing path
1207	Choose Object for the text\nCreate text as an object
1209	Specify a shadow's horizontal position\nSpecify a horiztonal shadow
1210	Specify a shadow's vertical position\nSpecify a vertical shadow
1211	Edit an existing object\nEdit an existing object
1212	Determine how to draw on an object\nSpecify the drawing mode
1213	Fill an object in an even-odd cycle\nFill in an even-odd cycle
1214	Fill an object in an even-odd cycle\nFill in an even-odd cycle
1215	Edit an object freely\nEdit an object freely
1220	Print an image\nSend image to printer
1221	Change the printer options\nChange printer options
1222	Resize an image to be printed\nResize the image
1223	Specify the number of copies to print\nSpecify the number of copies to print
1224	Specify the horizontal position to print from\nHorizontal position to print from
1225	Specify the vertical position to print from\nVertical position to print from
1226	Print a title with an image\nadd a title to the image
1229	Define various options for printing an image\nOptions Menu
1230	Define various options for viewing an image\nView Menu
1232	Close the preview window and return to the workspace\nClose the preview and return to the workspace
1250	Switch between the color map and color cells\nSwitch between color map and color cells
1251	Click the right mouse button to set the background color\nBackground Color
1252	Click the right mouse button to set the foreground color\nForeground Color
1253	Click the left mouse button to set the foreground color, right button for the background color\nPick a color
1254	Adjust the colors of an image\nClick to enhance an image's color
1320	The value must be within the range (%d..%d).
1321	Invalid number.
1322	The value must be within the range (%s..%s).
1323	Invalid integer.
1431	Choose the color used to fill\nBucket Fill Color
1432	Select a range of colors to fill\nSelect a range of colors to fill
1434	Control the way the fill color merges with an image\nControl how the fill color merges
1435	Control the degree of transparency when applying a fill color\nControl fill color transparency
1437	Smooth the edges of a fill\nAnti-aliasing
1438	Choose the starting color for the fill\nFill from this Color
1439	Choose the ending color of the fill\nFill to this Color
1440	Choose the color ramp used to perform the fill\nSpecify the fill color ramp
1441	Control the degree of transparency when applying a fill color\nControl fill color transparency
1443	Control the way the fill color merges with an image\nControl how the fill color merges
1452	\nBucket Fill
1453	\nLinear Gradient Fill
1454	\nRectangular Gradient Fill
1455	\nElliptical Gradient Fill
1600	All
1601	Blur & Sharpen
1602	Noise
1603	Camera Lens
1604	2D
1605	3D
1606	Natural Painting
1607	Special
1608	Custom
1610	All
1611	Tune
1612	Tone Map
1613	Effect
1614	Color Table
1615	Tools
1620	Magic
1621	Natural
1622	User-defined Magic
1658	Select object group
1660	Show a thumbnail's description
1661	Apply a thumbnail to an image
1662	Apply a thumbnail to an image after modifying its properties
1663	Delete selected thumbnails
1664	Change a thumbnail's properties
1665	Use image as thumbnail\nUse image as thumbnail
1666	Use a specific area of an image as the thumbnail
1667	Reset all thumbnails to the default thumbnails
1668	Open the file of a thumbnail as a new image
1669	Use the thumbnail image instead of its actual file
1670	Create an object library group
1671	Delete an object library group
1672	Import an object library group
1673	Delete selected objects
1674	View a group's properties
1675	Set a group as read-only for sharing
1676	Store a selection as an image
1677	Store selection as a selection marquee
1678	Store an image as a selection marquee
1679	Copy the selected object to the active image
1680	Drag-and-Drop in PhotoImpact Only
1688	Change function groups using tabs
1690	Menu Commands\nMenu Commands
1692	EasyPalette Galleries\nEasyPalette Galleries
3001	&Browse...
3002	&Option...
3003	&Preview...
3005	Sav&e to Album
3006	&Album...
3008	Save Se&lection
3009	Save Se&lection (EPS file for printing only)
7001	Black & White (1-bit)
7002	Grayscale (8-bit)
7003	Indexed 16-Color (4-bit)
7004	Indexed 256-Color (8-bit)
7005	RGB True Color (24-bit)
7006	HiColor (16-bit)
7009	CMYK True Color (32-bit)
7010	Unrecognized type
7020	Non-compressed
7021	Compressed
7022	%s
7024	%d Pixels
7025	%d Pixels (%d.%s %s)
7026	%d Lines (%d.%s %s)
7027	 KB
7028	 Bytes
7029	%d ppi
7030	Inches
7031	Cm
7032	Pixels
7033	Percent
7034	Pixels/Inch
7035	Pixels/Cm
7036	All Formats
8003	Move Object
8004	Add Object
8005	Delete Object
8006	Change Active
8007	Adjust Color
8008	Adjust Tone
8009	Adjust Focus
8011	Create New Selection
8012	Select None
8013	Change Selection
8014	Convert to Object
8015	Move Static Selection
8016	Paint
8017	Clone
8018	Erase
8019	Cut Object
8021	Resize
8022	Slant
8023	Distort
8024	Perspective
8025	Flip Vertically
8026	Flip Horizontally
8027	Rotate Left 90°
8028	Rotate Right 90°
8029	Rotate 180°
8030	Rotate by Horizontal Line
8031	Rotate by Vertical Line
8032	Rotate Freely
8033	Rotate by Degree
8035	Dodge
8036	Burn
8037	Blur
8038	Sharpen
8039	Smudge
8040	Select All
8041	Select Invert
8042	Select Border
8043	Select Similar
8044	Soften Selection
8045	Load Selection
8046	Duplicate Object
8048	Group Objects
8049	Ungroup Objects
8050	Change Object Properties
8051	Add Shadow
8052	Merge Selected Objects
8053	Merge All Objects
8054	Revert Object
8055	Convert Image Data Type
8057	Object Clone
8058	Retouch Selection
8080	Dimension
8081	Resolution
8090	Auto Straighten
8091	Auto Crop
8092	Auto Remove Moiré
8093	Auto Focus
8094	Auto Saturation
8095	Auto Brightness
8096	Auto Contrast
8097	Auto Balance
8098	Auto Process/Batch
8100	Bucket Fill
8101	Linear Gradient Fill
8102	Rectangular Gradient Fill
8103	Elliptical Gradient Fill
8110	Focus
8120	Quick Color Tuning
8130	Bring to Front
8131	Send to Back
8132	Bring to Top
8133	Send to Bottom
8134	Drag to Copy Object
8135	Drag to Move Object
8136	Drag to Fill
8137	Drag to Copy Selection
8138	Drag to Move Selection
8139	Set as Wallpaper - Tile
8140	Set as Wallpaper - Center
10000	Attribute Toolbar
10001	Standard Toolbar
10002	Tool Panel
10003	Color Panel
10006	This file contains no image objects.
10007	Do you want to clear any objects in the clone tool?
10008	Please click the Open button on the Attribute toolbar to load the image or UFO file you wish to clone.
10009	The base image data type must be the same as the loaded objects.
10010	The loaded objects contain an Indexed-Color image. This may result in unpredictable colors. Do you want to continue?
10011	You cannot undo or redo this action when using the Mask Brush tool.
10015	Mask Brush
10016	The %s does not work with Indexed-Color or Black & White images. Please convert to True Color or Grayscale and try again.
10017	retouch tool
10018	natural painting tool
10019	Clone tool
10020	Global Viewer
10021	Release mouse button to close Global Viewer.
10022	You cannot perform this action when using the Mask Brush tool.
10024	Clone Continuously
10025	Press the shift key and click the left mouse button to define the starting point of the area to clone.
10026	It is not possible to clone between two images of different data types.
10040	The current position exceeds the printable area, do you want to continue?
10041	%s on %s
10042	Exceeds page size.
10050	spacing
10051	The %s must be within the range (%d - %d).
10052	brush shape size
10053	transparency
10054	soft edge
10055	distribution
10056	pressure
10057	fade
10058	moisture
10059	similarity
10060	Destination
10061	Calibration
10062	Post Processing
10063	To: %s      Subject: %s
10065	The filename needs to end with at least one integer, e.g. file01.bmp.
10066	You need to specify the destination of the acquired image.
10067	You need to specify the filename of the acquired image.
10068	You need to specify mailing information for the acquired image.
10069	Please check the File check box and specify the filename of the acquired image in order to send it along with your mail.
10080	MAP
10081	Scan Map
10082	Do you want to delete the calibration map '%s'?
10083	DESC
10084	SCHEME
10090		Ctrl+Z
10091		Ctrl+Y
10095	[Preserve Base Image] 
10096	[Move Selection Marquee]
10100	New
10101	Add
10102	Subtract
10103	Rectangle
10104	Square
10105	Ellipse
10106	Circle
10110	Shape Size:
10111	Shape:
10200	Insufficient memory.
11001	TWAIN_32.DLL
11002	DSM_Entry
11003	Please close the Source dialog box before executing this command.
11242	Optimize window size at zoom in ratio 2
11243	Optimize window size at zoom in ratio 3
11244	Optimize window size at zoom in ratio 4
11245	Optimize window size at zoom in ratio 5
11246	Optimize window size at zoom in ratio 6
11247	Optimize window size at zoom in ratio 7
11248	Optimize window size at zoom in ratio 8
11249	Optimize window size at zoom in ratio 9
11250	Optimize window size at zoom in ratio 10
11251	Optimize window size at zoom in ratio 11
11252	Optimize window size at zoom in ratio 12
11253	Optimize window size at zoom in ratio 13
11254	Optimize window size at zoom in ratio 14
11255	Optimize window size at zoom in ratio 15
11256	Optimize window size at zoom in ratio 16
11261	Optimize window size at actual view
11262	Optimize window size at zoom out ratio 1/2
11263	Optimize window size at zoom out ratio 1/3
11264	Optimize window size at zoom out ratio 1/4
11265	Optimize window size at zoom out ratio 1/5
11266	Optimize window size at zoom out ratio 1/6
11267	Optimize window size at zoom out ratio 1/7
11268	Optimize window size at zoom out ratio 1/8
11269	Optimize window size at zoom out ratio 1/9
11270	Optimize window size at zoom out ratio 1/10
11271	Optimize window size at zoom out ratio 1/11
11272	Optimize window size at zoom out ratio 1/12
11273	Optimize window size at zoom out ratio 1/21
11274	Optimize window size at zoom out ratio 1/14
11275	Optimize window size at zoom out ratio 1/15
11276	Optimize window size at zoom out ratio 1/16
11900	u32brows.dll
11901	u32print
11902	u32feui
11903	u32txtur
11904	u32tu
11905	u32tx
11906	u32r2v
11907	u32cvt
11930	ufdFindFile
11931	u32Get256ColorTable
11932	u32ReGenerateTexture
11933	u32GetPredefined256ColorTable
12001	Always
12002	Hue & Saturation
12003	Hue Only
12004	If Lighter
12005	If Darker
12006	Pigment
12020	All
12021	Blur && Sharpen
12022	Noise
12023	Camera Lens
12024	2D
12025	3D
12026	Natural Painting
12027	Special
12028	Custom
12030	All
12031	Tune
12032	Tone Map
12033	Effect
12034	Color Table
12035	Tool
12040	Magic
12041	Natural
12042	Custom Magic
12100	Fading 3
12101	Fading 6
12102	Fading 9
12103	Fading 12
12104	Fading 15
12105	Face-Flushed
12106	Face-Pale
12107	Face-Dark
12108	Face-Embarrassed
12109	Face-Ghost
12110	Face-Weak
12111	Face-Blonde
12112	Face-Fantasy
12113	Face-Red Eyes
12114	House-Gold
12115	House-Vibrant
12116	House-Red
12117	House-White
12118	Red to Yellow
12119	Red to Orange
12120	Red to Pink
12121	Red to Purple
12122	Red to White
12123	Pink to Yellow
12124	Pink to Orange
12125	Pink to Red
12126	Pink to Purple
12127	Pink to White
12128	Purple to Yellow
12129	Purple to Orange
12130	Purple to Red
12131	Purple to Pink
12132	Purple to White
12133	Yellow to Orange
12134	Yellow to Red
12135	Yellow to Pink
12136	Yellow to Purple
12137	Yellow to White
12138	Dark Green
12139	Grass Green
12140	Withered Grass
12141	Withered Leaves
12142	Lighter Grass Green
12143	Bean Sprout Green
12144	Light-Argon
12145	Light-Helium
12146	Light-Krypton
12147	Light-Neon
12148	Light-Xenon
12149	Light-Bulb
12150	Light-Candle
12151	Light-Fluorescent
12152	Light-Shadow
12153	Light-Wood
12154	Light-Overcast
12155	Light-Sunny
12156	Sunset/Late Sunrise
12157	Sunset/Early Sunrise
12158	Sunset/Sunrise
12159	Beach-Golden
12160	Beach-White
12161	Sculpture-Bronze
12162	Sculpture-Copper
12163	Sculpture-Gold
12164	Sculpture-Iron
12165	Sculpture-Nickel
12166	Sculpture-Silver
12167	Sea-Deep Aqua
12168	Sea-Lake
12169	Sea-Light Aqua
12170	Sea-River
12171	Mountain-Forest
12172	Mountain-Soil
12173	Mountain-Snow
12174	Season-Spring
12175	Season-Summer
12176	Season-Autumn
12177	Season-Winter
12178	Sky-Blue
12179	Sky-Cloudy
12180	Sky-Evening
12181	Sky-Gray
12182	Sky-Red Cloudy
12183	Sky-Typhoon
12184	Sky-Sunshine to Sunset
12185	Sky-Sunset to Sunshine
12186	Filter-Yellow 10%
12187	Filter-Yellow 20%
12188	Filter-Magenta 10%
12189	Filter-Magenta 20%
12190	Filter-Cyan 10%
12191	Filter-Cyan 20%
12192	Filter-Red 10%
12193	Filter-Red 20%
12194	Filter-Green 10%
12195	Filter-Green 20%
12196	Filter-Blue 10%
12197	Filter-Blue 20%
12198	Other-Colorful
12199	Other-Sunglasses
12200	Predefined
12201	Style-Int-%s
12202	Style-Sat-%s
12203	Style-Chr-%s
12204	Custom
12210	The image data type cannot be used as a reference image.
12211	Please use a Grayscale or Black & White image.
12262	%d x %d Pixels
12263	(%d-bit)
12270	Px
12271	In
12272	Cm
12273	C
12274	M
12275	Y
12276	K
12277	%s%s
12290	ULEAD32.INI
12291	ULEAD.DAT
12292	PLUG IN
12293	PLUGINDIR%d
12294	PLUGIN
12300	There are other objects hidden beneath the selected objects. Do you want to continue?
12301	Obj-%d
12305	G%d
12306	%s/%s
12307	%s/%s/%s
12308	Unavailable (plug-in effects)
12309	None (Tool Options)
12310	IEEFFECT.SMP
12311	IEMY.SMP
12312	IESTYLE.SMP
12313	IEMAGIC.SMP
12314	IENATURE.SMP
12315	IECUSTOM.SMP
12316	IEGRAD.SMP
12331	EasyPalette
12332	Effect Gallery
12333	Style Gallery
12334	Texture Gallery
12335	Gradient Gallery
12336	My Gallery
12337	Layer Manager
12338	Object Library
12369	Sel
12370	Lasso
12371	Magicwand
12372	MaskBr
12373	EyeDropper
12374	Zoom
12375	Trans
12376	Dodge
12377	Burn
12378	Blur
12379	Sharpen
12380	Smudge
12381	PaintBr
12382	AirBr
12383	Crayon
12384	Charcoal
12385	Chalk
12386	Marker
12389	Image Clone
12390	Object Clone
12391	EraseAll
12392	Erase
12393	Bucket Fill
12394	Gradient Fill
12395	Text
12396	Path
12494	O?%02d_*.PCX
12495	OBJPOOL.DAT
12496	Image-%d
12497	Selection-%d
12498	Import Object Group
12499	Object Group Files (*.OPG)|*.OPG|All Files (*.*)|*.*||OPG|
12500	OI%02d_%03d.PCX
12501	OM%02d_%03d.PCX
12502	.OPG
12503	More Groups...
12504	OA%02d_%03d.PCX
12505	Failure to save object.
12506	Failure to load object.
12507	To perform this function you first need to enable the PCX file format from Preferences.
12508	The object library cannot have more than 32 groups.
12509	A group cannot have more than 256 objects.
12510	This group already exists in the object library.
12511	This command cannot be undone. Are you sure you want to continue?
12512	This command cannot be undone. Are you sure you want to continue?
12513	The group file is illegal.
12514	The folder is write-protected.
12515	Failure to create the object group file. The filename may contain unsupported characters.
12516	Failure to save the object library properties. Disk may be full.
12517	Unable to import this object group as there is a group with the same group ID in the same folder.
12518	The group file of group '%s' does not exist. The group will be deleted.
12519	A group already exists with the same name.
12520	Unable to continue. The group is read-only or in use.
12521	The object group '%s' is being edited by another user right now.
12522	Unable to import group. The group file '%s' is being edited by another user right now.
12523	Unable to change file attributes. The group is being used by another user right now.
12524	A group name cannot contain any of the following characters:\n\/:*?"<>|
12525	\/:*?"<>|
12526	Failure to create the object group. The object group file already exists.
12527	This volume does not support long filenames.
12528	The folder (%s) does not exist. Do you want to create it?
12529	Unable to import group. The group file has been moved from the folder it was created in, or been renamed.
12550	Closing the EasyPalette now will reset all thumbnails. Do you want to continue?
12551	There are no plug-in effects.
12562	Select object group (%s)
12563	Plug-in Effect: %s
12570	Please close the dialog box open in another PhotoImpact program first.
12572	The plug-in effect is unavailable.
12573	The plug-in effects are not loaded. Check the Load plug-in effects during initialization option in the File/Preference dialog box.
12574	The image data type cannot be applied to the thumbnail.
12580	Unable to perform edge blending. Try a smaller soften edge width.
12581	Unable to perform edge blending. Try a smaller value.
12583	Illegal texture file.
12584	Unable to perform warping. The image's dimensions are too large.
12585	The current selection mode on the attribute toolbar is set to add or subtract. Please change to new before continuing.
12586	The selection need to be repostioned when you load it. Suggest to use object library. Continue?
12600	Insufficient memory. Unable to update thumbnails in the Layer Manager.
12601	Unable to access the valid Object Library control file. Please use the Import Group command in the EasyPalette button menu to load in your existing group files.
12602	Please select black or white only.
13501	The current position exceeds the printable area, and no image will be shown.
13502	It is not possible to view paths while in print preview mode.
13503	The selected printer is invalid, the print preview will be closed.
13504	Please close the Print preview before executing this command.
13511	Quick Command Panel
13512	Layout &Options...
13513	Mo&dify...
13514	&Load...
13515	Save &As...
13516	Load
13517	Save As
13518	Quick Command Files (*.QCP)
13519	*.QCP
13520	The value must be within the range [%d..%d]
13521	QCP - 
13522	C%d
13523	Too many items selected, some items may be lost.
13524	File %s already exists, replace it and continue?
13525	Not a quick command file of %s.
13526	Close
14010	RGB
14011	HSB
14012	HSB
14100	No Auto range
14101	Load Tone Map
14102	Save Tone Map
14103	Tone Map Files (*.MAP)|*.MAP|All Files (*.*)|*.*||MAP|
14200	&Preview
14201	&Continue
14202	&Redo
14203	&Undo
14210	Adjusted
14211	B&&C
14212	Balance
14213	B&C
14214	Color Balance
14215	Shrink
14216	Expand
14217	Level
14218	You need to select an object before performing a transformation operation.
14219	Unable to perform the transformation.
14220	Smart Balance
14221	Unable to continue. The current selection is smaller than the object.
14222	Map
14223	Highlight Midtone Shadow
14224	Auto Enhance
14230	Master
14231	Red
14232	Green
14233	Blue
14234	RGB
14235	HSB
14236	Color Only
14237	Hue Only
14238	1
14239	2
14240	4
14241	8
14242	16
14243	Unable to fit the image within its window.
14244	Map
14245	HMS
14246	Invalid map. This map is no longer valid and should be removed.
14247	Applying this command has no effect as all parameters are disabled or set to zero.
14250	Hue & Saturation
14251	Frame & Shadow
14255	Percentage
14260	This command cannot be undone. Are you sure you want to continue?
14270	Black & White
14271	Indexed 16-Color
14272	Indexed 256-Color
14273	Grayscale
14274	True Color
14280	No file information currently exists for the active image.
14285	Unable to place data onto the clipboard.
14290	This operation may produce unexpected results using the current data type. Do you want to continue?
14291	Some objects have been repositioned.
14292	Unable to make an object as the image is larger than the base image.
14293	Manual
14294	Smart
14295	Magic
14296	textures\
14297	  Unable to find the required texture file on our hard disk and CD-ROM drive. Please insert the PhotoImpact CD and click Retry.(If you press Cancel, PhotoImpact will apply the thumbnail image only).
14298	\n\n  If you use textures frequently, run the setup program and choose custom installation to download all texture files to your hard disk. (You will need an additional 38MB of free disk space.)
14300	The file format you have chosen to save the file \nto doesn't support selection and object saving. \nIf you choose to continue, the selection will not \nbe saved and all objects will be merged onto the  \nbase image. To save both selections and objects, \nuse the UFO format. Do you want to continue?
14301	The file format you have chosen to save the file \nto doesn't support selection saving. \nIf you choose to continue, the selection will not \nbe saved. Do you want to continue?
14302	The file format you have chosen to save the file \nto doesn't support object saving. \nIf you choose to continue, all objects will \nbe merged onto the base image. \nDo you want to continue?
14303	The file format you have chosen to save the file \n is a lossy file format, it may cause changes to \n the image file. \n Do you want to continue?
14310	Generating textures...
14311	Black
14312	Gray
14313	Fair
14314	Good
14315	Best
14320	BRIGHTNESS
14321	CONTRAST
14322	RED
14323	GREEN
14324	BLUE
14330	Please select two reference points first.
14331	There is no overlap area.
14332	The overlap area is too small.
14333	The overlap area or tolerance is too small.
14334	The cell size is too small.
14335	Vertical to&lerance: 
14336	Horizontal to&lerance: 
14337	Drag and drop to match, or press the Shift key to select reference points.
14338	Set the overlap range and tolerance.
14340	The Auto-Straighten command can only be applied to the base image.
14341	The Auto-Crop command can only be applied to the base image.
14342	There is no other image that has the same data type as the currently active image.
14343	Zoom in
14344	Zoom out
14345	Zoom at 1X1
14346	Zoom to best view
14347	You need to create a selection or select an object before applying this command.
14348	This command cannot be applied to multiple objects.
14349	Acquire Post Processing... 
14350	Unable to run Album3.exe
14351	Width
14352	Height
14353	The %s of the image will exceed %d pixels (the maximum %s of an image) after you perform this operation. Please use smaller values for either the Frame, Shadow, or Canvas options.
14354	Any changes made with the Quick Color Controls will be lost.
14355	Indexed color and Black and White image cannot apply texture fill.
14356	Stitching only works on base images. If the images you have selected contain any objects, they will not be retained on the new stitched image.
14357	The custom texture library is empty.
14358	The Quick Color Controls do not work with the text-based paths objects or selections. Try using the respective commands in the Format menu.
14359	%s
14361	straight.rtf
14362	crop.rtf
14363	rmvmoire.rtf
14364	focus.rtf
14365	bright.rtf
14366	contrast.rtf
14367	balance.rtf
14368	autoproc.rtf
14371	Auto-Process Batch
14376	Unable to continue. The image width exceeds 32,000 pixels.
14377	Unable to continue. The height exceeds 32,000 pixels.
14378	Unable to continue. The image width and height exceeds 32,000 pixels.
14381	Processing clipboard data, 
14382	Unable to resize the image to %d x %d.
14384	Unable to perform this operation. Please ensure that there are no text-based paths objects or selections.
14385	The undo/redo histroy of all images will be cleared whenever you reduce the undo level.
14391	Transform Tool
14392	Move handles(control points) to resize
14393	Move handles(control points) to slant
14394	Move handles(control points) to distort
14395	Move handles(control points) to change perspective
14396	Move handle then double click on it to rotate horizontally
14397	Move handle then double click on it to rotate vertically
14398	Move handles (control points) to rotate freely
14400	The command can only be applied on the objects or selections inside the base image.
16001	Unable to complete the operation. The current display mode is incompatible with the clipboard image.
16002	This version does not support compressed 16-bit or multiple plane bitmaps.
16003	Untitled - %d
16004	Do you want to preserve the current clipboard data?
16005	Choosing this command closes the connection between this embedded object and %s-%s. Do you want to update the embedded object before proceeding?
16006	PhotoImpact is unable to access the clipboard.
16007	PhotoImpact does not support the current clipboard data.
16008	The object on the clipboard is a different data type than the base image. Pasting now will convert the object to the data type of the base image. Do you want to continue?
16009	The current clipboard data has no color palette. After pasting, some colors may be incorrect.
16010	You cannot copy multiple objects onto the clipboard.
16030	%d Pixels/Inch
16031	%d Pixels/Cm
16032	%ld Pixels
16033	%s KB
16034	%s Bytes
16035	%sKB
16036	IMG0001.TIF
16037	PI3.Image
16038	Ulead PhotoImpact 3
16039	FileName
16040	Help of PI3 File Open/Save
16041	 is dropped. Please open to check if correct.
16042	Unable to save %s to album %s.
16043	Unable to write description to album %s.
16044	PhotoImpact Ob_Pool File
16045	If you choose to continue, all objects will \nbe merged onto the base image and send back to container. \nDo you want to continue?
16046	Unable to process CMYK file format.
16047	Please close the dialog box before executing this command.
18001	New Selection
18002	Deselect
18003	Add Selection
18004	Subtract Selection
18005	Select and Move
18006	Move Path
18007	Group Path
18008	Ungroup Path
18009	Delete Path
18010	Duplicate Path
18011	Extend Path
18012	Close Path
18013	Drag Path
18014	Insert Point
18015	Add Path
18016	Edit Envelope
18101	Create Text
18102	Create Path
18103	Change Active
18104	Selection Operation
18105	Path Edit Mode
18106	Path Mode
18107	Switch Mode
18108	Change Path
18109	New Path
18110	Add Path
18111	Switch to Selection
18112	Move Path Object
18113	Switch to Object
18114	Change Color
19001	Edit Text
19002	Render
19003	Distort
19004	Object
19005	Path
19006	Selection
19007	There is nothing to trace.
19008	Color picker not found.
19009	Typeface %s not found.
20000	100%
20001	press ESC to Abort
20002	%3d%%
20003	Free Memory:%3d%%
20010	(%d,%d) 
20011	(%d,%d)-(%d,%d) 
20012	r=%d g=%d b=%d
20013	[%d] 
20014	gray=%d
20015	Black
20016	White
20017	   h=%d s=%d b=%d
20018	   h=*  s=%d b=%d
20020	W:%d H:%d
20021	[%d%% %d%%]
20022	Angle=%d
20100	Close
20101	Close Quickly
20102	Minimize
20103	Print
20104	Resolution
20105	Select
20106	Save
20107	Save to Album
20110	Close Quickly will close all selected images without saving. Do you want to continue?
20120	Focus Sharp
20121	Focus Blur
20122	Focus Auto
20200	Palette Files (*.PAL)|*.PAL|All Files (*.*)|*.*||PAL|
20201	Load Color Table
20202	Save Color Table
20203	Pal-%d
21242	&2x Ctrl+Shift+2
21243	&3x Ctrl+Shift+3
21244	&4x Ctrl+Shift+4
21245	&5x Ctrl+Shift+5
21246	&6x Ctrl+Shift+6
21247	&7x Ctrl+Shift+7
21248	&8x Ctrl+Shift+8
21249	&9x Ctrl+Shift+9
21250	1&0x Ctrl+Shift+0
21251	1&1x
21252	1&2x
21253	1&3x
21254	1&4x
21255	1&5x
21256	1&6x
21261	&1x Ctrl+1
21262	1/&2x Ctrl+2
21263	1/&3x Ctrl+3
21264	1/&4x Ctrl+4
21265	1/&5x Ctrl+5
21266	1/&6x Ctrl+6
21267	1/&7x Ctrl+7
21268	1/&8x Ctrl+8
21269	1/&9x Ctrl+9
21270	1/1&0x Ctrl+0
21271	1/1&1x
21272	1/1&2x
21273	1/1&3x
21274	1/1&4x
21275	1/1&5x
21276	1/1&6x
23311	1x
23315	2x
23316	3x
23317	4x
23318	5x
23319	6x
23320	7x
23321	8x
23322	9x
23323	10x
23324	11x
23325	12x
23326	13x
23327	14x
23328	15x
23329	16x
23330	1/2x
23331	1/3x
23332	1/4x
23333	1/5x
23334	1/6x
23335	1/7x
23336	1/8x
23337	1/9x
23338	1/10x
23339	1/11x
23340	1/12x
23341	1/13x
23342	1/14x
23343	1/15x
23344	1/16x
23350	The data source you selected is invalid.
23351	Unable to print the file.
23352	Microtek
23353	It is not possible to apply any calibration or post processing  to a Black-&-White Image.
23354	&Internet Imaging
23355	Unable to find the map file.
23356	Unable to open the map file.
32801	Reopen the original image file
32802	Load an image file as the base image
32803	Load an image file as an object
32804	Select the source of your input device
32805	Select the device to import new image data from\nAcquire
32806	Read a help message about acquiring images and troubleshooting
32807	Define preferences for PhotoImpact
32808	Tile PhotoImpact with Album, or run Explorer and CD Browser\nTile with Album or run Explorer and CD Browser
32809	Tile an image with Album on the left
32810	Tile an image with Album on the right
32811	Tile an image with Album on top
32812	Tile an image with Album on the bottom
32813	Run PhotoImpact Explorer
32814	Run PhotoImpact CD Browser
33001	Undo the previous action\nUndo [Ctrl+Z]
33101	Redo the previous action\nRedo [Ctrl+Y]
33201	Free all memory reserved for undo/redo operations
33202	Insert the contents of the clipboard as a new object\nPaste [Ctrl+V]
33203	Insert the contents of the clipboard into a selection\nPaste into Sel
33204	Insert the contents of the clipboard within a selection\nPaste Fit Sel
33205	Insert the contents of the clipboard as a new image\nPaste As New Doc
33206	Insert the contents of the clipboard wherever you click your mouse\nPaste where mouse down
33207	Remove a selection and place it into a target window\nMove
33210	Crop the base image around a selection
33211	Fill a selection with color, data from the clipboard, or a texture
33212	Stitch the base image of two images together to create a new image\nStitch
33215	Convert a raster image into a vector image
33216	Convert a vector image into a raster image
33231	Create a new image by duplicating the base image only
33232	Create a new image by duplicating the base image, merging any objects
33233	Create a new image by duplicating the base image, retaining any selections or objects
33251	Deselect the current selection
33252	Make the entire image the selection area
33253	Select those parts of an image unselected and deselect the selected parts
33254	Define a border around the current selection area
33255	Select areas of an image with similar colors to the selection area
33256	Feather the edges of a selection
33257	Convert a selection into an object
33258	Load a Grayscale image as a selection
33259	Save a selection to a file or album
33260	Add a selection to the Object Library
33271	Duplicate selected objects
33273	Delete selected objects
33274	Group selected objects
33275	Ungroup selected objects
33276	Specify an object's properties
33277	Add a shadow to an object
33278	Merge selected objects onto the base image
33279	Merge all objects  onto the base image
33280	Revert an object back to its original appearance
33282	Add an object to the Object Library
33283	Make the base image active
33284	Make the inactive selection active
33285	Sort selected objects by depth
33286	Sort selected objects by name
33287	Sort selected objects by group
33288	Load an image file onto the clipboard\nLoad to Clipboard
33289	Save the contents of the clipboard as an image file\nSave Clipboard
33290	Display the contents of the clipboard\nDisplay Clipboard
33295	Show system properties
33296	Show or hide toolbars and panels, as well as set button size or color
33297	Show or hide ribbons and panels\nLayout
33300	Show or hide EasyPalette\nEasyPalette
33301	Show Standard toolbar only for basic editing
33302	Show Standard toolbar and Tool panel for intermediate editing
33303	Show all toolbars and panels for advanced editing
33304	Show or hide the Standard toolbar
33305	Show or hide the Tool panel
33306	Show or hide the Attribute toolbar
33307	Show or hide the Color panel
33308	Show or hide EasyPalette\nEasyPalette
33309	Show or hide the Quick Command panel
33310	Change the zoom level on the current image\nZoom
33311	Show an image at its actual size (100%)
33312	Optimize an image's window size and zoom ratio
33313	Show image and file properties
33314	Show or hide the ruler
33315	resize to two times actual size
33316	resize to three times actual size
33317	resize to four times actual size
33318	resize to five times actual size
33319	resize to six times actual size
33320	resize to seven times actual size
33321	resize to eight times actual size
33322	resize to nine times actual size
33323	resize to ten times actual size
33324	resize to eleven times actual size
33325	resize to twelve times actual size
33326	resize to thirteen times actual size
33327	resize to fourteen times actual size
33328	resize to fifteen times actual size
33329	resize to sixteen times actual size
33330	resize to one half actual size
33331	resize to one-third actual size
33332	resize to one-fourth actual size
33333	resize to one-fifth actual size
33334	resize to one-sixth actual size
33335	resize to one-seventh actual size
33336	resize to one-eighth actual size
33337	resize to one-ninth actual size
33338	resize to one-tenth actual size
33339	resize to one-eleventh actual size
33340	resize to one-twelfth actual size
33341	resize to one-thirteenth actual size
33342	resize to one-fourteenth actual size
33343	resize to one-fifteenth actual size
33344	resize to one-sixteenth actual size
33360	Show Global Viewer\nGlobal Viewer
33361	Enlarge an image window to occupy the entire screen
33362	Remove the menu bar from view
33381	Perform two or more of the auto process options\nAuto Process
33382	Straighten an image automatically
33383	Crop an image automatically
33385	Adjust the focus an image or object automatically
33386	Adjust the brightness of an image or object automatically
33387	Adjust the contrast an image or object automatically
33401	Adjust the brightness and contrast an image or object\nBrightness & Contrast
33402	Adjust the color balance of an image or object\nColor Balance
33403	Adjust the hue and saturation of an image or object
33405	Adjust the focus of an image or object
33406	Adjust the color tone of an image or object
33407	Adjust the number of colors displayed in an image or object
33408	Adjust the dimensions of an image
33409	Adjust the resolution of an image
33410	Add a frame or shadow to an image\nFrame & Shadow
33412	Reverse the colors of an image or object
33415	Adjust an image or object with a style\nStyle
33419	Edit an Indexed-Color image's color table
33420	Convert an image to Black & White
33421	Convert an image to Grayscale
33422	Convert an image to Indexed 16-Color
33423	Convert an image to Indexed 256-Color
33424	Convert an image to True Color
33425	Specify the color table when converting an image to Indexed 16-Color
33426	Specify the color table when converting an image to Indexed 256-Color
33427	Create a new image when converting to another data type
33428	Split a True Color image into its CMYK channels
33429	Combine CMYK images into a True Color image
33430	Convert an image to the standard Indexed 256-Color palette for Internet WWW browsers
33500	Add Noise
33501	Average
33502	Blur
33503	Cool
33504	Custom Filter
33505	Despeckle
33506	Emphasize Edges
33507	Emboss
33508	Facet
33509	Fat
33510	Find Edges
33511	Gausian Blur
33512	Mosaic
33513	Motion Blur
33514	Pinch
33515	Punch
33516	Puzzle
33517	Ripple
33518	Sharpen
33519	Sphere
33520	Thin
33521	Tile
33522	Custom Effect
33523	Warping
33524	Watercolor
33525	Whirlpool
33526	Blast
33527	Stagger
33528	Wind
33529	Warm
33530	Adjust for NTSC
33531	Remove Moiré
33532	Adjust for PAL
33533	Unsharp Mask
34541	Set as Wallpaper: Tile
34542	Set as Wallpaper: Center
34543	Apply paint over the edges of a selection or object (a paint tool must be selected to be enabled)
34649	Apply the same command over several images
34650	Tile EasyPalette with an image\nTile EasyPalette with the active image
34651	Tile an image with the EasyPalette horizontally (on the left)
34652	Tile an image with the EasyPalette horizontally (on the right)
34653	Tile an image with the EasyPalette vertically (on the top)
34654	Tile an image with the EasyPalette vertically (on the bottom)
34655	TBD
34657	Display information about other Ulead products
34659	Learn how to use PhotoImpact to create and manage Web pages
34701	Bold
34702	Italic
34703	Underline
34704	Strikethrough
34705	Outline
34706	Shadow
34707	Normal
34708	Align to the left
34709	Align to the right
34710	Align to the center
34711	Anti-aliasing
34815	Edit existing path
34816	Edit new path
35001	Create standard selection areas\nStandard Selection Tool
35002	Create selection areas of irregular shapes\nLasso Tool
35003	Create selection areas based on similar colors\nMagic Wand Tool
35004	Modify or create an existing selection area\nMask Brush Tool
35005	Determine the current fore/background color\nEyedropper Tool
35006	Increase or reduce the magnification level of an image\nZoom Tool
35007	Flip or distort an object or selection\nTransform Tool
35008	Highlight various aspects of an image\nRetouch Tool
35009	Paint on an image or object using the fore/background colors\nPaint Tool
35010	Copy images or objects within or between images\nClone Tool
35011	Erase selected colors to another color\nEraser Tool
35012	Fill an area using the fore/background colors\nFill Tool
35013	Place or edit text on an image\nText Tool
35014	Manipulate a vector or text object\nPath Tool
35020	Paint freely
35021	Paint in straight lines
35022	Paint in connected lines (double-click to join)
35024	Start a selection from the center out
35025	Preserve the base image when generating an object
35026	Smooth the edges of a selection
35027	Move the selection marquee only, without generating an object
35028	Actual view
35029	Fit in window
35030	Rotate to the left 90 degrees
35031	Rotate to the right 90 degrees
35032	Rotate until upside down
35033	Flip an image or object horizontally
35034	Flip an image or object vertically
35035	Switch to the Transform tool
35036	Clone the objects in random order
35037	Clone the objects in sequential order
35038	Clone one object per mouse click
35039	Drag your mouse to spray objects over an image
35051	System default texture library
35052	User-defined texture library
35100	For Help, press F1
35101	  
35114	Change the current measurement unit\nUnit
35115	Change the current data type\nImage Type
36055	Manage images, define preferences and control all input and output devices
36056	Standard commands for editing images
36057	Control the view of images and show/hide elements of the workspace
36058	Change the resolution, size and type of images
36059	Commands for performing special effects to images
36060	Control the positioning of images and icons in the workspace
36061	Access to the on-line help
36062	Run other PhotoImpact programs
57344	Ulead PhotoImpact
57345	For Help, press F1.
57346	Select an object on which to get Help
57600	Create a new image\nNew [Ctrl+N]
57601	Bring an existing image into the workspace\nOpen [Ctrl+O]
57602	Remove an image from the workspace\nClose [Ctrl+W]
57603	Save the active image\nSave [Ctrl+S]
57604	Save the active image with a new name\nSave As
57605	Change the printing options\nPage Setup
57606	Change the printer and printing options\nPrint Setup
57607	Print an image\nPrint [Ctrl+P]
57608	Preview how an image will appear printed on a page\nPrint Preview
57609	Update the container to show any changes to an image\nUpdate Document
57610	Save a copy of the active image with a new name\nSave Copy
57616	Open this image
57617	Open this image
57618	Open this image
57619	Open this image
57632	Erase an object or the contents of a selection area\nErase [Del]
57634	Copy an object or selection and place it onto the clipboard\nCopy [Ctrl+C]
57635	Cut an object or selection and place it onto the clipboard\nCut [Ctrl+X]
57642	Select the entire image\nSelect All
57643	Undo the last action\nUndo [Ctrl+Z]
57644	Redo the previously undone action\nRedo [Ctrl+Y]
57648	Open another window for the active image\nNew Window
57649	Arrange icons along the bottom of the workspace\nArrange Icons
57650	Arrange open images so that they appear on top of and below each other\nCascade Windows [Shift+F5]
57651	Arrange open images as non-overlapping tiles, left to right, top to bottom\nTile Windows
57652	Arrange open images as non-overlapping tiles, top to bottom, left to right\nTile Windows [Shift+F4]
57664	Display the PhotoImpact product information box\nAbout
57665	Exit PhotoImpact\nExit
57666	List Help topics\nHelp Index
57667	Display instructions about how to use help\nHelp
57668	Display help for selected buttons, menus and windows\nHelp
57669	Display help for the current task or command\nHelp
57680	Switch to the next window pane\nNext Pane
57681	Switch to the previous window pane\nPrevious Pane
59136	EXT
59137	CAP
59138	NUM
59139	SCRL
59140	OVR
59141	REC
59392	Show or hide the toolbar\nToggle ToolBar
59393	Show or hide the status bar\nToggle StatusBar
61184	Change the window size
61185	Change the window position
61186	Reduce the window to an icon
61187	Enlarge the window to full size
61188	Switch to the next image window
61189	Switch to the previous image window
61190	Close the active window
61202	Restore the window to normal size
61203	Activate Task List
61215	Activate this window
61445	Close print preview mode\nCancel Preview