------------------------------------------------------------------------------- FIRST FINANCIAL SOFTWARE * * * * * * * * FPLAN * * * * * * * * RETIREMENT PLANNER Version 2.0 USERS GUIDE Information presented in this guide is available throughout the regular program indicated at various menu options. ------------------------------------------------------------------------------- Copyright(c) 1990 by First Financial Software. All Rights Reserved ------------------------------------------------------------------------------- TABLE OF CONTENTS ----------------- SECTION PROGRAM ITEM PAGE --------- ------------------------------------------------------- ------ A Introduction:............................................ 1 B Initial Screen:.......................................... 2 B-1 Demo & Regular Program Option:........................... 2 B-2 Suggested Instructions to Use Program:................... 2 B-3 Introduction Screen (Regular/Automatic Presentation):.... 2 C Main Menu:............................................... 3 C-1 Narrative Presentation:.................................. 4 C-2 Planning Module Menu:.................................... 5 C-3 Main Utilities Menu:..................................... 5 C-3-1 User Code:............................... 5 C-3-2 Total Analysis:.......................... 6 C-3-3 Special Instructions to Print:........... 7 C-3-4 General Help Training:................... 7 C-3-5 License Agreement:....................... 7 C-4 Customer Service Information & Ordering:................. 8 C-5 Exiting Program:......................................... 8 D Retirement Planner Module:............................... 8 D-1 Module Initial Screen:................................... 9 D-2 Screen Options:.......................................... 9 D-2-A Print Illustration:...................... 10 D-2-1 Input all Information:................... 11 D-2-2 Module Utilities/Edit Menu:.............. 12 D-2-3 Exit without Saving Data:................ 12 D-2-4 Print Questionnaire:..................... 12 D-2-5 Exit Saving New/Changed Data:............ 13 D-2-6 Annuity Options:......................... 13 ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- TABLE OF CONTENTS CONTINUED --------------------------- SECTION PROGRAM ITEM PAGE --------- ------------------------------------------------------- ------ E Module Utilities/Edit Option Menu:....................... 13 E-1 Economic Assumptions:.................................... 14 E-2 Edit Completed:.......................................... 14 E-3 Delete Module Data:...................................... 14 E-4 Changing Modes (Current/Current vs Proposed):............ 15 E-5 Help/Training Menu:...................................... 15 E-6 Editing Specific Line Number:............................ 15 F Help/Training Menus:..................................... 16 F-1 General Help/Training:................................... 16 F-1-1 General Problem Items:................... 16 F-1-2 Starting Program:........................ 17 F-1-3 Stopping & Operating Program:............ 17 F-1-4 Printing Problems:....................... 17 F-2 Module Help/Training:.................................... 18 F-2-1 General Purpose:......................... 18 F-2-2 Module Options Menu:..................... 18 F-2-3 Special Features:........................ 19 F-2-4 Utilities/Edit Menu:..................... 21 F-2-5 Rational of Computations:................ 21 F-2-6 Normal Problems:......................... 22 G Technical Information:................................... 22 G-1 General & System Requirements:........................... 22 G-2 Files Listing:........................................... 23 ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- SECTION A - INTRODUCTION ------------------------ Retirement Planning is becomming more and more complex due to the numerous changes in Tax Laws and the differenct types of retirement benefits available. Social Security, Personal Savings and Business Retirement Programs are usually what compromise the retirement benefits a person gets. Now since people are living longer, retirement benefits are of prime importance to most individuals. A big fear is outliving your income benefits. To add to the problem, most retirement programs, includeing IRA, 401K, and other company benefit programs do not have a defined retirement benefit (not even considering the impact of increases in the cost of living), but pay benefits depending on the results of the investment performance of the program. Future availablility of Social Security benefits are also a question. Individuals are more and more responsible to insure they have sufficient assets to support themselves in retirement. This program is designed to help you to reach your retirement goal. You need to know where you are and if what your doing leads to your goal. By using this program all these questions can be answered. You can monitor your progress as ofter as you like, because you have the tool to do it with this program. This program is always being revised because of changes in the tax laws and improvement suggestions from users. If retirement planning is important to you, then registration of this program is a valuable asset for your retirement financial planning. ------------------------------------------------------------------------------- SECTION B - INITIAL SCREEN -------------------------- When the Program is Started by Typeing RETIRE at the DOS Prompt>, the FPLAN logo will appear with the following at the bottom of the screen: ............................................................................... ------------------------------------------------------------------------------- This Program is provided under the Shareware Distribution System. You may feel free to copy and pass this program to others for their evaluation. If you make use of this program, you are expected to submit a registration fee. (See Main Menu Option 4 (Section C-4) for details). Thank you. ------------------------------------------------------------------------------- Type 1 & Press Return for DEMONSTRATION Program or Just Press Return for REGULAR Program:.... ............................................................................... ------------------------------------------------------------------------------- FPLAN USERS GUIDE Page 1 ------------------------------------------------------------------------------- SECTION B-1 - Demo & Regular Program Option ------------------------------------------- If you have not reviewed the program, suggest you Type 1 & Press Return for the Demonstration Version of the Program (See B-3). The program will not accept any input of data, but will illustrate demo figures and extra explanations of items. If you have reviewed the program or if desired, you may proceed directly to the Main Menu (See Section C). In this mode, the program will accept your own data and avoid general explanation screens. The top of most screens will show the mode the program is in as follows: ............................................................................... FPLAN - RETIREMENT PLANNER - DEMONSTRATION MODE or FPLAN - RETIREMENT PLANNER - REGULAR MODE ............................................................................... Changing of the program between Demo & Regular can be done at Main Utilities Option 1 (User Code) (See C-3-1) or by Exiting and Restarting the program. ------------------------------------------------------------------------------- SECTION B-2 - SUGGESTED INSTRUCTIONS TO USE THIS PROGRAM -------------------------------------------------------- (This program has two main Modes, DEMONSTRATION and REGULAR. Suggest review of the DEMONSTRATION Mode before using the REGULAR Mode.) 1. At the Introduction Screen, choose the AUTOMATIC PRESENTATION (Type 1 and Press Return). After reviewing each screen, Press Return to Continue until you reach the end of the program. This is a quick general review of the programs features and benefits. 2. After the end of the Automatic Presentation, the MAIN MENU will reappear as just the Demonstration Mode. You may choose any item desired for for furthur review. You should, as a minimum, review menu items not presented during the Automatic Presentation. 3. Use the REGULAR MODE of the program. At MAIN MENU choose # 3 Utilities Option Menu. At Utilities Option Menu choose Option # 1 to INPUT USER CODE. Input Shareware User Code - 1234 and proceed to MAIN MENU. The program will then allow for your input and computation of the analysis. (You may also Exit and Restart the Program) ----------------------------------------------------------------------------- SECTION B-3 - INTRODUCTION SCREEN (Regular/Automatic Presentation Option ------------------------------------------------------------------------ FPLAN - RETIREMENT PLANNER - DEMONSTRATION MODE - INTRODUCTION SCREEN RETIREMENT PLANNER Version X.0 ----------------------------------------------------------------------------- FPLAN USERS GUIDE Page 2 ---------------------------------------------------------------------------- For This DEMONSTRATION you have the Option for an AUTOMATIC PRESENTATION or you may choose to proceed at your choice. If you have not reviewed the program, suggest you use the AUTOMATIC PRESENTATION first. You may STOP the Automatic Presentation when offered that option. This will present the MAIN MENU OF OPTIONS and allow you to proceed by your choice. Type 1 and Press Return for AUTOMATIC PRESENTATION or Just Press Return for MAIN MENU OF OPTIONS:.. ............................................................................... If you have not reviewed the program, suggest you Type 1 & Press Return for the Automatic Demonstration Version of the Program. The program will continue from screen to screen by just Pressing Return. The next option to be presented will be noted by >>>>>. You may cancel the Automatic Presentation by Typeing Z and Pressing Return at each prompt>. This will return the Regular Demo program and the Main Menu. If you have reviewed the program or if desired, you may proceed directly to the Main where you may proceed at your choice to review or select other Demo items. The top of most screens will show the mode the program is in as follows: ............................................................................... FPLAN - RETIREMENT PLANNER - DEMONSTRATION MODE or FPLAN - RETIREMENT PLANNER - DEMONSTRATION MODE - AUTOMATIC PRESENTATION ............................................................................... At the completion of the Automatic Presentation the following appears: >>>>> This ENDS the AUTOMATIC PRESENTATION - When MAIN MENU reappears, you may proceed at your choice - Press Return for Main Menu:.. Changing of the program between Demo & Regular can be done at Main Utilities Option 1 (User Code) (See C-3-1) or by Exiting and Restarting the program. ------------------------------------------------------------------------------- SECTION C - MAIN MENU --------------------- The MAIN MENU OF OPTIONS allows for the selection of any of five options: OPTION 1 = Program Narrative Presentation: General Information relative to the features/benefits of the program and First Financial. OPTION 2 = RETIREMENT PLANNER MODULE MENU: Questionnaire, Data Input and Illustration for Retirement Planning Analysis. OPTION 3 = Utilities Options Menu: Presents program maintenance and special options. OPTION 4 = Customer Service and Order Information/Form: Shows where to call for help, price information and to print the Registration Form. OPTION 5 = Exit FPLAN Demonstration Program: Will exit the program and return your computer system to DOS. ------------------------------------------------------------------------------- FPLAN USERS GUIDE Page 3 ------------------------------------------------------------------------------- MAIN MENU OF OPTIONS: FOR DETAILS SEE SECTION --------------------- ----------------------- 1 = Program Narrative Presentation:............... C-1 2 = RETIREMENT PLANNER MODULE MENU:............... D-2 3 = Main Utilities Options Menu:.................. C-3 4 = Customer Service and Order Information/Form:.. C-4 5 = Exit FPLAN Demonstration Program:............. C-5 ------------------------------------------------------------------------------- SECTION C-1 - Program Narrative Presentation -------------------------------------------- First Financial Software has been providing professional financial planning software to professionals (Financial Planners, Stockbrokers, Insurance Agents, CPA's, etc.) since 1982. Our commercial program, FPLAN, covers all aspects of personal financial planning from investments to insurance. Because of the need for an organized approach to financial planning and to make it available to more people, we have decided to provide various FPLAN modules as Shareware. This Retirement Planner module is designed to assist individuals in the planning of their retirement. Retirement programs, IRA's, 401K's, etc. require active management by the individual to be able to achieve their retirement goals. This program will help you do that. You will know if your current programs will achieve your retirement goal or if not, what you need to do. The program was designed to be easy to use, even for those who do not have extensive experience with computers. The program Menus encompass all that you need to know to perform your own retirement analysis. (In the Demonstration Mode, Each Menu will be preceded by an explanation screen) If you find this program useful and would like more financial planning in this format, we have a few suggestions and requests. 1. Notify your Shareware Distributor to let you know when new FPLAN Modules are available. If you register, we will notify you also. 2. We can provide you a printed Total Preliminary Financial Analysis. You would submit a completed 8 Page Questionnaire, the Order Form, and a $30 fee. We will process your analysis and send you a report followed with a telephone discussion. (See Main Utilities Option 2). (Also See Section C-3-2) 3. If your a financial planning professional or would like your advisor to consider using the Professional FPLAN Program, order the FPLAN DEMO KIT (See Main Menu Option 4) (Also See Section C-4). 4. Since there are Financial Planning Professionals using FPLAN throughout the US from Hawaii to New York, we can place you in contact with the closest FPLAN user. They would be happy to discuss financial planning and give suggestions for implementation of financial programs. ------------------------------------------------------------------------------- FPLAN USERS GUIDE Page 4 ------------------------------------------------------------------------------- SECTION C-2 - RETIREMENT PLANNER MODULE MENU -------------------------------------------- SEE SECTION D ------------------------------------------------------------------------------- SECTION C-3 - MAIN UTILITIES MENU --------------------------------- The MAIN UTILITIES MENU allows for the selection of any of five options: OPTION 1. TO INPUT USER CODE: Allows for input of User Code to change program from Demonstration to Regular Program or back to Demonstration. OPTION 2. INSTRUCTIONS FOR TOTAL PRELIMINARY FINANCIAL ANALYSIS. Special offer to provide you a total professional financial analysis. OPTION 3. SPECIAL INSTRUCTIONS FOR PRINTING: Allows for Set-Up to accommodate Laser Printers and comments on printing problems. OPTION 4. GENERAL HELP/TRAINING MENU: Program items explained in detail. OPTION 5. LICENSE AGREEMENT: Our agreement which allows you use the program. ............................................................................... MAIN UTILITIES MENU FOR DETAILS SEE SECTION ------------------- ----------------------- 1. TO INPUT USER CODE:................................ C-3-1 2. ORDERING A TOTAL PRELIMINARY FINANCIAL ANALYSIS:... C-3-2 3. SPECIAL INSTRUCTIONS FOR PRINTING:................. C-3-3 4. GENERAL HELP/TRAINING MENU:........................ F-1 5. LICENSE AGREEMENT:................................. C-3-5 ------------------------------------------------------------------------------- SECTION C-3-1 ------------- Utilities Option 1 - USER CODE INPUT (User Code in Use:... XXXX ) ------------------------------------ (Demo) 1. TO INPUT USER CODE (This will ask for a provided 4 digit code which will activate the REGULAR MODE of the program, if desired.) (Regular) 1. TO INPUT USER CODE (You MUST Enter Your 4 Digit User Code or press return for DEMONSTRATION Mode.) The USER CODE system is used for the Commercial Version of FPLAN to validate and authorize use of the program during the lease period. For Shareware, you may enter the USER CODE 1234 to change the Program from DEMONSTRATION to REGULAR Mode. If you enter other than 1234, the Program Mode will change to or continue with the DEMONSTRATION Mode. ------------------------------------------------------------------------------- FPLAN USERS GUIDE Page 5 ------------------------------------------------------------------------------- Various Messages depending on Mode in Use: ------------------------------------------ To Continue with DEMONSTRATION Mode, just Press Return or Enter USER CODE: 1234 to validate the program (Change to Regular Mode). To Input USERS CODE, you must be in REGULAR MODE or NON-AUTOMATIC PRESENTATION You must enter 4 Digit USERS CODE: 1234 or program will revert to DEMO. If Desired, INPUT 4 DIGIT USER CODE AND PRESS RETURN:.... (CANNOT CHANGE WHILE IN AUTOMATIC PRESENTATION) INPUT 4 DIGIT USER CODE AND PRESS RETURN:.... ------------------------------------------------------------------------------- SECTION C-3-2 ------------- Utilities Option 2 - Instructions for TOTAL PRELIMINARY FINANCIAL ANALYSIS -------------------------------------------------------------------------- As mentioned in the Program Narrative, we can provide you with a Total Preliminary Financial Analysis. This analysis will be performed by a Certified Financial Planner. It will cover the following financial areas: Income & Expense, Balance Sheet (Assets & Liabilities), Economic Assumptions, College Education Planning, Retirement, Capital Needs (Life Insurance), Estate Planning and Disability Income Planning. If you desire to do this (or just completing the questionnaire is a good financial experience), print the 8 page questionnaire and submit it with the Order Form (Main Menu Option 4) and fee. We will process your plan and send you a printed report. After you review the report, we can discuss it by phone. Please insure you note convenient time to call on the FPLAN Order Form. .............................................................................. Type 1 and Press Return to PRINT 8 Page QUESTIONNAIRE or Just Press Return for UTILITIES MENU:..... WHEN THE PRINT OPTION IS CHOOSEN, THE FOLLOWING ITEMS APPEAR- ------------------------------------------------------------- PRINTER SET-UP FOR: (REGULAR OR LASER PRINTER) (Can Change at MAIN UTILITIES MENU Option #3) WILL PRINT BLANK TOTAL ANALYSIS QUESTIONNAIRE (To EXIT to MAIN UTILITIES MENU WITHOUT PRINTING - Type 2 and Press Return) This Questionnaire is 8 Pages ------------------------------------------------------------- Type 1 and Press Return to Print Continuous (Fan-Fold Paper) or Just Press Return and Printer will STOP between Pages:.. .............................................................................. ------ LOADING QUESTIONNAIRE PRINT MODULE, WAIT FOR NEW SCREEN ------ (After Printing Utilities Option #2 will reappear) ------------------------------------------------------------------------------- FPLAN USERS GUIDE Page 6 ------------------------------------------------------------------------------- SECTION C-3-3 ------------- Utilities Option 3 - Special Instructions for Printing ------------------------------------------------------ This Program is now set-up for LASER PRINTERS You may change the set-up to use a regular printer as instructed below. ---- or ---- This Program is now set-up for REGULAR PRINTERS Align top of sheet at paper guide bar on your printer. This will be the proper position on most printers. If you have a Laser Printer you need to change the set-up as instructed below. Most printing problems are due to the printer not being turned on and running out of paper. Before printing the program will ask you if the printer is ready. Please take that time to check. NOTE: This Option is not available in the AUTOMATIC Presentation Mode. Type 1 and Press Return to CHANGE PRINTER SET-UP or Just Press Return for UTILITIES MENU:..... ------------------------------------------------------------------------------- SECTION C-3-4 - Utilities Option 4 - General Help/Training Menu --------------------------------------------------------------- SEE SECTION F ------------------------------------------------------------------------------- SECTION C-3-5 - Utilities Option 5 - License Agreement ------------------------------------------------------ FPLAN COMPUTER PROGRAM LICENSE AGREEMENT - LICENSOR: First Financial Software ------------------------------------------------------------------------------- 1. COPYRIGHT: THIS PROGRAM IS PROTECTED BY FEDERAL COPYRIGHT LAW. THE PROGRAM REMAINS THE EXCLUSIVE PROPERTY OF THE LICENSOR. THE USER IS GRANTED A NON- EXCLUSIVE LICENSE TO USE THE PROGRAM. THE USER MAY NOT SELL OR USE THIS PROGRAM FOR COMMERCIAL PURPOSES. AFTER AN INITIAL REVIEW PERIOD, THE USER WILL PAY A REGISTRATION FEE, AS NOTED IN THE PROGRAM, FOR CONTINUED USE OF THE PROGRAM. 2. INSTALLATION OF PROGRAM: THE USER WILL PROVIDE ANY NECESSARY OPERATION MS- DOS OR RELATED SOFTWARE TO OPERATE THE PROGRAM. 3. EXCLUSION OF WARRANTY: THE PROGRAM IS PROVIDED 'AS IS' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE. 4 LIMITATION OF LIABILITY: FIRST FINANCIAL SOFTWARE OR ITS PRINCIPALS, EMPLOYEES OR ANY RELATED COMPANIES SHALL NOT BE LIABLE FOR ANY DAMAGES (WHETHER DIRECT OR INDIRECT, CONSEQUENTIAL OR INCIDENTAL, COMPENSATORY OR PUNITUVE) ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM. THIS PROGRAM IS NOT INTENDED TO PROVIDE INVESTMENT/LEGAL ADVICE. CONSULT YOUR PROFESSIONAL ADVISOR. 5. ENTIRE AGREEMENT, MODIFICATIONS: THE USE OF THE PROGRAM OR ANY RELATED MATERIAL IS DEFACTO ACCEPTANCE OF THIS AGREEMENT. THIS INSTRUMENT CONSTITUTES THE ENTIRE AGREEMENT OF THE PARTIES. NO MODIFICATION OR AMENDMENT OF THIS AGREEMENT SHALL BE BINDING EXCEPT IF IN WRITING AND SIGNED BY THE PARTIES. ------------------------------------------------------------------------------- FPLAN USERS GUIDE Page 7 ------------------------------------------------------------------------------ SECTION C-4 - CUSTOMER SERVICE AND ORDER INFORMATION/FORM: ---------------------------------------------------------- Any questions regarding this program can be directed to Customer Service: First Financial Software .... Please Call: 1-800-736-4920 P.O. Box 592967 (Messages taken 24 hours/day) Orlando, FL 32859-2967 ------------------------------------------------------------------------------ This Program is provided under the Shareware System. If you wish to use the program after your initial review, a Registration Fee of $ 30.00 is requested. Payment of the Registration fee will provide telephone support, 20% discount on other FPLAN Programs and a 50% discount on future versions. Registration Total Financial Planning Preliminary Analysis (See Utilities Option #2). It also provides for the continued development and distribution of these programs. Please submit a completed FPLAN ORDER FORM to effect registration. You may also use this form to order a Total Financial Planning Preliminary Analysis and/or order a FPLAN Commercial Version Demonstration Kit. (Printing of Order Form will not affect Automatic Presentation) (You can print the FPLAN ORDER FORM from the Regular Program or from DOS> at ORDER.FRM (See README.1ST File) ------------------------------------------------------------------------ SECTION C-5 - EXIT OF PROGRAM ----------------------------- (From DEMO) 5 = Exit FPLAN Demonstration Program. (To Use the Automatic Presentation, you must exit and Restart the Program) (From Regular) 5 = Exit FPLAN Program. Choosing this option will bring FPLAN Logo screen and return your system to DOS> ------------------------------------------------------------------------------- SECTION D - RETIREMENT PLANNER MODULE ------------------------------------- We will now present the Retirement Planning Module. For the Demon- stration Version, the data will already be noted as an example. The Current Situation illustrates a monthly shortage of $ 148 at retirement for this person to reach their retirement goal. They would need to put away a lump-sum of $ 17,566 or a yearly amount of $ 3,203 for 7 years to attain their goal. The Proposed illustration notes that just by reducing their tax bracket, they can reach their goal without any other changes or additions. (You reduce a tax bracket by repositioning taxable assets to tax-free or tax-deferred items.) For the Automatic Presentation we will only view the module screen for Current and Proposed Situation. You should review all the attributes and print the Questionnaire and Illustration from the Regular or Non-Automatic Demo Mode. For the Demonstration version you can review all the attributes and print the Questionnaire and Illustration with the sample numbers noted. For your analysis, you need to be in the REGULAR MODE. Do this by entering the USER CODE 1234 at Utilities Option # 1. ------------------------------------------------------------------------------- FPLAN USERS GUIDE Page 8 ------------------------------------------------------------------------------- SECTION D-1 - Module Initial Screen ----------------------------------- When Option #2 (RETIREMENT PLANNER MODULE MENU) of the MAIN MENU is Choosen the following appears: ------ LOADING RETIREMENT PLANNING MODULE, WAIT FOR NEW SCREEN ------- GETTING DATA FROM DATA FILES - WAIT FOR NEW SCREEN (Appears in Regular Mode Only) RETIREMENT PLANNING MODULE CURRENT (Mode Only) -------------------------- ------------ RETIREMENT PLANNING MODULE CURRENT PROPOSED CHANGE -------------------------- ----------- ----------- ---------- (If title says DEMO then figures are from Demonstration Version. If in Regular Mode, figures are those last saved under Option #5) Each line of the screen is explained: Input Line # Item Remarks ------------ ---------------------------------- ---------------------------- H1. CURRENT AGE:.............................. H1 H2. RETIREMENT AGE:........................... (NOT LESS THAN H1) YEARS TO GO:.............................. H2-H1 DESIRED INCOME: H3. MONTHLY INCOME IN CURRENT DOLLARS:........ H3 MONTHLY INCOME IN FUTURE DOLLARS:......... Adjusted for Inflation F2. AMOUNTS ADJUSTED FOR INFLATION RATES OF:.. F2 H3. AND ADJUSTED FOR AVERAGE INCREASE TO AGE:. (See Section F-2-3) TOTAL FUTURE INCOME AMOUNTS:......... Total of Income Items (See Section D-2-A) FUTURE NET AMOUNT (OVER/-SHORT):..... Future Income Amounts less Desired Future Income AT RETIREMENT REQUIREMENTS TO FUND/MO.:... Same as above AT RETIREMENT TOTAL (WITH ANNUITY AMT):... (See Section D-2-6/F-2-3) AT RETIREMENT TOTAL TO HAVE:.............. Required Total at Retirement H11.INCLUDES DEDUCTION FOR SALE OF ASSETS:.... (See Section F-2-3) LUMP-SUM NOW TO INVEST:................... Total Needed Currently BASED ON AFTER-TAX RATE OF RETURN OF:..... F1 adjusted for F3 YEARLY DEPOSIT REQUIRED TO MEET GOAL:..... Amount Each Year to Meet Goal ------------------------------------------------------------------------------- SECTION D-2 - MODULE SCREEN OPTIONS ----------------------------------- (Appears at Bottom of RETIREMENT PLANNING MODULE Screen) //CURRENT MODE// OPTIONS: (CR) PRINT ILLUSTRATION 3. TO MAIN MENU (NOT SAVING NEW DATA) 1. ENTER ALL INFORMATION 4. PRINT BLANK QUESTIONNAIRE 2. UTILITIES/EDIT MENU 5. TO MAIN MENU (SAVES NEW DATA) //CURRENT VS. PROPOSED MODE// OPTIONS: (CR) PRINT ILLUSTRATION 3. TO MAIN MENU (NOT SAVING NEW DATA) 1. ENTER ALL INFORMATION 4. PRINT QUESTIONNAIRE WITH SAVED DATA 2. UTILITIES/EDIT MENU 5. TO MAIN MENU (SAVES NEW DATA) (Need Data in Current) 6. TO CONSIDER ANNUITY OPTION Type Number of OPTION DESIRED and Press Return or Just Press Return to Print Illustration:...... ------------------------------------------------------------------------------ FPLAN USERS GUIDE Page 9 ------------------------------------------------------------------------------ MAIN MODULE MENU FOR DETAILS SEE SECTION ---------------- ----------------------- (CR) PRINT ILLUSTRATION:............................... D-2-A 1. ENTER ALL INFORMATION:.............................. D-2-1 2. UTILITIES/EDIT MENU:................................ D-2-2 3. TO MAIN MENU (NOT SAVING NEW DATA):................. D-2-3 4. PRINT QUESTIONNAIRE:................................ D-2-4 5. TO MAIN MENU (SAVES NEW DATA):...................... D-2-5 6. TO CONSIDER ANNUITY OPTION:......................... D-2-6 ------------------------------------------------------------------------------ SECTION D-2-A - MODULE OPTION MENU OPTION 0: PRINT ILLUSTRATION: ---------------------------------------------------------------- WHEN THIS OPTION IS CHOOSEN, THE FOLLOWING ITEMS APPEAR- -------------------------------------------------------- PRINTER SET-UP FOR: (REGULAR OR LASER PRINTER) (Can Change at MAIN UTILITIES MENU Option #3) WILL PRINT (CURRENT or CURRENT VS PROPOSED) ILLUSTRATION (Can Change at UTILITIES/EDIT MENU Option #4) This Illustration is One Page (To CANCEL this PRINT - Type 1 and Press Return) -------------------------------------------------------- - PRINTER READY? - PRESS RETURN TO PRINT ILLUSTRATION - ------------------------------------------------------------------------------- The Printed Illustration contains the following: (If Demo) SAMPLE PERSONAL RETIREMENT ANALYSIS ----------------------------------- (Regular) PERSONAL RETIREMENT ANALYSIS ---------------------------- (Current has only one set of figures, CURRENT PROPOSED CHANGE Proposed has three) ---------- --------- --------- Each line of the illustration is explained: Input Line # Item Remarks ------------ ---------------------------------- ---------------------------- H2. Age or Desired Retirement:................ (NOT LESS THAN H1) Years to Go Before Retirement:............ H2-H1 DESIRED INCOME: H3. Monthly Income in Current Dollars:........ H3 Monthly Income in Future Dollars:......... Adjusted for Inflation F2. Inflation Rate Adjustment Used:........... F2 H3. Adjusted for Average to Age:.............. (See Section F-2-3) ------------------------------------------------------------------------------ FPLAN USERS GUIDE Page 10 ------------------------------------------------------------------------------ RETIREMENT INCOME SOURCES (Amounts in Future Dollars) Balance of Cash & Investments:............ H5a+H6 at Retirement After-Tax Growth Rate Used:............... F1 adjusted for Tax F3 H6. Includes Yearly Additions of:............. H6 Monthly Earnings on Cash & Investments:... at Retirement After-Tax Rate of Earnings Used:.......... F1 adjusted for Tax F3 Balance of IRA/Keogh & Annuities:......... D12a+H8 at Retirement H8. Growth Rate of Return Used:............... H8 H7. Includes Yearly Additions of:............. H7 Earnings on IRA/Keogh & Annuities:........ at Retirement After-Tax Rate of Earnings Used:.......... H8 adjusted for Tax F3 Balance of Pension Investments:........... D12b+H10 at Retirement H10. Growth Rate of Return Used:............... H10 H9. Includes Yearly Additions of:............. H9 Earnings on Pension Accounts:............. at Retirement After-Tax Rate of Earnings Used:.......... H10 adjusted for Tax F3 Estimated Social Security Benefits:....... H4 adjusted for Increase H4. Yearly Increase in Benefits Rate Used:.... H4 item Estimated Other Retirement Benefits:...... H5 adjusted for Increase H5. Yearly Increase in Benefits Rate Used:.... H5 item TOTAL FUTURE INCOME AMOUNTS:.......... Total of Income Items FUTURE NET AMOUNT (OVER/-SHORT):...... Future Income Amounts less Desired Future Income RETIREMENT FUNDING REQUIREMENTS ------------------------------- At Retirement Monthly Income to Fund:...... Amount, If Short Above F2. Inflation Rate Adjustment Used:........... F2 To provide for desired income needed is:... Total at Retirement (Which will not be depleted during retirement) (Using Annuity Option Based on Todays Rates):. (See Section D-2-6/F-2-3) H11.(Includes Sale of Assets at Retirement:... (See Section F-2-3) Can be funded with a lump-sum now of:...... Total Needed Currently Investment Rate Adjustment Used:.......... F1 adjusted for Tax F3 or by a yearly deposit of:................. Amount Each Year to Meet Goal (After printing, Module Screen reappears) ------------------------------------------------------------------------------- SECTION D-2-1 - MODULE OPTION MENU OPTION #1: ENTER ALL INFORMATION: -------------------------------------------------------------------- THIS OPTION REQUIRES THE INPUT OF ALL INFORMATION FOR THIS MODULE. AT THE END OF EACH INPUT SCREEN YOU HAVE THE FOLLOWING OPTION: CORRECT=PRESS RETURN - REEDIT=TYPE 1 AND PRESS RETURN IF YOU HAVE MADE A MISTAKE IN DATA INPUT - YOU ARE ALLOWED TO (MUST) REENTER THE DATA FOR THE WHOLE SCREEN. IF YOU PASS THE SCREEN OR DESIRE YOU CAN CONTINUE TO THE MAIN SCREEN AND EDIT THE LINE(S) USING OPTION 2 (EDIT SELECTED DATA) TO CORRECT THE ITEM. ------------------------------------------------------------------------------- FPLAN USERS GUIDE Page 11 ------------------------------------------------------------------------------- SECTION D-2-2 - MODULE OPTION MENU OPTION #2: UTILITIES/EDIT MENU: ------------------------------------------------------------------ YOU MAY EDIT DATA AS NOTED ON EDIT MENU. INFORMATION ASKED FOR MUST BE BE ENTERED IN TOTAL. IF YOU EXIT WITHOUT SAVING (OPTION 3) CHANGES WILL NOT BE SAVED. TO SAVE CHANGED DATA USE EXIT SAVING (OPTION 5) AT THE MAIN SCREEN. THIS IS WHERE YOU CAN CHANGE MODES (CURRENT TO PROPOSED OR PROPOSED TO CURRENT) WITH OPTION 4 AND DELETE ALL EXISTING DATA FOR A NEW MODULE WITH OPTION 3. AN ERROR MESSAGE WITH POSSIBLE ERROR CAUSE WILL APPEAR IF IMPROPER INPUT IS MADE. ------------------------------------------------------------ Possible Error: 1. Questionnaire Line Number Incorrect 2. Not an Option (Use 1 - 5 or Valid Questionnaire Line Variable) 3. Use Option #2 for Main Screen ------------------------------------------------------------ EACH UTILITIES/EDIT OPTION IS EXPLAINED IN DETAIL IN SECTION E. ------------------------------------------------------------------------------- SECTION D-2-3 ------------- MODULE OPTION MENU OPTION #3: RETURN TO MAIN MENU (NOT SAVING NEW DATA): ------------------------------------------------------------------------ IF YOU DO NOT WANT TO SAVE NEW/CHANGED DATA AND RETURN TO THE MAIN MENU - TYPE 3 AND PRESS RETURN NOTE: THIS WILL NOT SAVE ANY NEW/CHANGED DATA FOR THE MAIN PROGRAM BUT THE DATA SAVED WILL BE THE LAST DATA SAVED WITH OPTION 5. MAKE SURE YOU WANT TO DO THIS ------------------------------------------------------------------------------- SECTION D-2-4 - MODULE OPTION MENU OPTION #4: PRINT // // QUESTIONNAIRE: ------------------------------------------------------------------------- WHEN THIS OPTION IS CHOOSEN, THE QUESTIONNAIRE PRINT MODULE WILL LOAD AND THE FOLLOWING INFORMATION WILL APPEAR: ----------------------------------------------------------- PRINTER SET-UP FOR: REGULAR (or LASER) PRINTER (Can Change at MAIN UTILITIES MENU Option #3) WILL PRINT BLANK (or with Data Noted) QUESTIONNAIRE (Can Change at UTILITIES/EDIT MENU Option #4) (To CANCEL this PRINT - Type 1 and Press Return) Questionnaire is 2 Pages & Printer will STOP Between Pages. ----------------------------------------------------------- - PRINTER READY? - PRESS RETURN TO PRINT FIRST PAGE - Make sure your printer is ON and paper is ready or Type 1 to Cancel. The RETIREMENT MODULE SCREEN Will Return after Printing. ------------------------------------------------------------------------------- FPLAN USERS GUIDE Page 12 ------------------------------------------------------------------------------- SECTION D-2-5 - MODULE OPTION MENU OPTION #5: TO MAIN MENU (SAVES NEW DATA): --------------------------------------------------------------------------- IF YOU WANT TO ACTUALLY SAVE NEW/CHANGED DATA AND RETURN TO THE MAIN MENU - TYPE 5 AND PRESS RETURN NOTE: THIS WILL SAVE NEW/CHANGED DATA FOR THE MAIN PROGRAM NOW IN FPLAN MAKE SURE YOU WANT TO DO THIS - FOR MAIN HELP MENU USE OPTION 3 TO NOT SAVE ANY NEW/CHANGED DATA. (The following message appears before returning to Main Menu) SAVING DATA TO DATA FILES - WAIT FOR NEW SCREEN ------------------------------------------------------------------------------- SECTION D-2-6 ------------- OPTION=6. ANNUITY OPTION CONSIDERATION ANALYSIS //AVAILABLE IN PROPOSED ONLY// ----------------------------------------------- AT RETIREMENT REQUIREMENTS TO FUND/MO:.. $ 1,234 //FUNDING SHORTAGE// AT RETIREMENT TOTAL TO HAVE:............ $ 123,456 //TOTAL NEEDED// INCLUDES DEDUCTION FOR SALE OF ASSETS:.. $ 50,000 LUMP-SUM NOW TO INVEST:................. $ 99,999 //LUMP-SUM AMOUNT// (BASED ON AFTER TAX 9.00% RATE OF RETURN) YEARLY DEPOSIT REQUIRED TO MEET GOAL:... $ 11,111 BASED ON FUNDING NEED OF: $ 1,234 PER MONTH OR $ 14,808 PER YEAR //1234 X 12// AT RETIREMENT AND A CURRENT AFTER-TAX RATE OF RETURN OF:..... 9.00% ENTER COST FOR PROPOSED ANNUITY TO FUND INCOME REQUIREMENTS AT RETIREMENT (PRESS RETURN TO CANCEL ANNUITY OPTION):.......... $ //PRESS RETURN AND NO ANNUITY OPTION WILL ILLUSTRATE. TO DETERMINE THE AMOUNT FOR THE ANNUITY OPTION: FROM AN INSURANCE FIRM= AMOUNT TODAY TO FUND THE 1,234 PER MONTH FOR THE TYPE IMMEDIATE ANNUITY THE CLIENT WOULD DESIRE (JOINT/SURVIVOR, STRAIGHT LIFE, PERIOD CERTAIN, ETC.). THE PROGRAM WILL COMPUTE THE AMOUNT FOR A LUMP-SUM TODAY AND YEARLY AMOUNT TO HAVE THE REQUIRED AMOUNT AT RETIREMENT. YOU WILL NEED TO UPDATE AS RATES ON ANNUITIES CHANGE. (ANOTHER GOOD REASON FOR AT LEAST YEARLY UPDATES)// (Also See Section F-2-3 Special Items, Annuity) ------------------------------------------------------------------------------- SECTION E - MODULE UTILITIES/EDIT MENU: --------------------------------------- EDITING DATA FOR //CURRENT MODE (SEE #4)// RETIREMENT ANALYSIS -------------------------------------------------------------- 1. ECONOMIC ASSUMPTIONS(F(1) - F(3)) (RATE OF RETURN - INFLATION RATE - TAX BRACKET) 2. EDIT COMPLETE - RETURN TO RETIREMENT MODULE MENU SCREEN 3. DELETE ALL EXISTING DATA 4. CHANGE MODE FROM //CURRENT MODE// TO //OTHER MODE// ANALYSIS 5. HELP/TRAINING MENU 6. NOTE: To Edit Specific Line Number - Refer to Questionnaire and Enter Line Number WITHOUT the () i.e. H(4) as H4 ENTER ITEM DESIRED OR LINE NUMBER FROM QUESTIONNAIRE TO EDIT: ------------------------------------------------------------------------------ FPLAN USERS GUIDE Page 13 ------------------------------------------------------------------------------ UTILITIES/EDIT MENU FOR DETAILS SEE SECTION ------------------- ----------------------- 1. ECONOMIC ASSUMPTIONS:.............................. E-1 2. EDIT COMPLETE:..................................... E-2 3. DELETE ALL EXISTING DATA:.......................... E-3 4. CHANGE MODE:....................................... E-4 5. HELP/TRAINING MENU:................................ E-5 6. NOTE: To Edit Specific Line Number:................ E-6 ------------------------------------------------------------------------------- SECTION E-1 - UTILITIES/EDIT MENU ITEM #1: ECONOMIC ASSUMPTIONS --------------------------------------------------------------- This Option will require entering the three Economic Assumptions: F(1) BEFORE-TAX Yield Rate F(2) Annual Inflation Rate F(3) Marginal Tax Bracket The calculated AFTER-TAX RATE (Except for IRA/Pension/Annuity) will be shown. Guidelines for these items are found on the Questionnaire. ------------------------------------------------------------------------------- SECTION E-2 - UTILITIES/EDIT MENU ITEM #2: EDIT COMPLETE - RETURN TO RETIREMENT MODULE MENU SCREEN: --------------------------------------------------------------------- This Option is used when the UTILITIES/EDIT items are completed to Return to the Retirement Planning Module Screen and Options Menu. ------------------------------------------------------------------------------- SECTION E-3 - UTILITIES/EDIT MENU ITEM #3: DELETE ALL EXISTING DATA: -------------------------------------------------------------------- When this OPTION is choosen, the following question appears: ARE YOU SURE YOU WANT TO DELETE EXISTING DATA? TYPE 1 AND PRESS RETURN TO DELETE DATA or Just Press Return for Utilities Menu:.... If you are not sure, just press return and no data will be erased. If you want all data erased, Type 1 and press return. The following message will appear: ****** DELETING DATA FILES - WAIT ****** When all data has been erased, the module screen will appear. There will be some 1's noted which you can ignore. ------------------------------------------------------------------------------ FPLAN USERS GUIDE Page 14 ------------------------------------------------------------------------------- SECTION E-4 - UTILITIES/EDIT MENU ITEM #4: CHANGE MODE FROM //CURRENT MODE// TO //OTHER MODE// ANALYSIS: ------------------------------------------------------------------------- You can determine which MODE the program is in two ways: 1. The MAIN SCREEN will have ONE COLUMN OF NUMBERS for CURRENT MODE. It will have THREE COLUMNS (CURRENT-PROPOSED-CHANGE) for the CURRENT VS. PROPOSED MODE. 2. The UTILITIES/EDIT MENU heading (OPTION 2) will state - EDITING DATA FOR - (Mode the program is in). You would ALWAYS start with the CURRENT SITUATION MODE. You would enter the information AS IS and NOT AS PLANNED FOR to show the effects after the PROPOSED has been implemented. The QUESTIONNAIRE printed in this MODE will be a BLANK QUESTIONNAIRE. PROPOSED SITUATION is used once data has been entered already for the CURRENT SITUATION. Proposed data will be compared with the CURRENT to show the effect of the change. The QUESTIONNAIRE printed in this MODE will print CURRENT NUMBERS on the QUESTIONNAIRE for reference. ------------------------------------------------------------------------------- SECTION E-5 - UTILITIES/EDIT MENU ITEM #5: HELP/TRAINING MENU: -------------------------------------------------------------- This Option activates Help/Training for the Retirement Planning Module (SEE SECTION F-2). General Items Help is available at the Main Menu Utilities Option #4 (SEE SECTION F-1). ------------------------------------------------------------------------------- SECTION E-6 - UTILITIES/EDIT MENU ITEM #6: To Edit Specific Line Number: ------------------------------------------------------------------------ To Edit Specific Line Number, Refer to the Questionnaire and Enter Line Number WITHOUT the () i.e. H(4) as H4. (DO NOT ENTER - H 4 - H( 4) - H/4 - ETC.) With the MODE as CURRENT, you will edit CURRENT DATA ONLY. With the MODE as CURRENT VS. PROPOSED, you will edit PROPOSED DATA ONLY. You may edit as many Line Numbers as desired. When finished use OPTION 2 (Edit Complete) to Return to the Retirement Menu. If you enter a Non-Valid Line Number, **** ENTRY ERROR **** will appear on screen with a list of possible errors. Just Press Return for the EDIT MENU and Input Correct Item to Continue. ----------------------------------------------------------------------------- FPLAN USERS GUIDE Page 15 ------------------------------------------------------------------------------ SECTION F - HELP/TRAINING MENUS ------------------------------- SECTION F-1 - Utilities Option 4 - GENERAL HELP/TRAINING MENU ------------------------------------------------------------- We will not review the individual items from the AUTOMATIC Presentation, but you can and should review each one from the Non-Automatic Demonstration Mode or Regular Mode. MOST ALL PROBLEMS CAN BE SOLVED BY REVIEWING HELP/TRAINING RELATIVE TO THE ITEM IN QUESTION. IF YOU NEED OTHER HELP - CALL 1-800-736-4920 - IF NO-ONE IS AVAILABLE OR IF AFTER HOURS - LEAVE YOU NAME, NUMBER AND BEST TIME TO CALL YOU BACK. 1. GENERAL OPERATING ITEMS (General Problems and How to Fix) 2. STARTING & OPERATING PROGRAM 3. STOPPING PROGRAM (Various Ways) 4. PRINTING (Various Problems and Solutions) CHOOSE OPTION DESIRED OR PRESS RETURN FOR MAIN UTILITIES MENU:..... GENERAL HELP/TRAINING MENU FOR DETAILS SEE SECTION -------------------------- ----------------------- 1. GENERAL OPERATING ITEMS:........................... F-1-1 2. STARTING & OPERATING PROGRAM:...................... F-1-2 3. STOPPING Program:.................................. F-1-3 4. PRINTING:.......................................... F-1-4 ------------------------------------------------------------------------------- SECTION F-1-1 - GENERAL HELP/TRAINING MENU OPTION #1: GENERAL OPERATING ITEMS ----------------------------------------------------------------------------- GENERAL PROBLEMS WITH THE PROGRAM NOT OPERATING CORRECTLY AND SUGGESTED CORRECTIVE MEASURES=FIX 1. (FLOPPY DISK) You Started your system, the program didn't run and displayed the message 'Non-System disk or disk error': Didn't Boot your system with your DOS Disk first. FIX=Re-Boot your system with DOS Disk first. 2. (HARD-DISK) You Typed - RETIRE and the program didn't run and displayed the MESSAGE 'Bad command of file name': You are not in the Proper Sub- Directory and/or correct Drive. FIX=If installed on Drive X - on X> type CD\Proper Directory, Press Return, Then Type RETIRE and Press Return. 3. Report/Questionnaire will not print: Some kind of Printer Problem. FIX=Insure your printer is on and connected correctly. 4. The program will only display DEMONSTRATION Information: Incorrect USERS CODE or Started wrong Module. FIX=INPUT CORRECT USERS CODE (1234) in Utilities Option 1 and DO NOT start any program other than RETIRE. ------------------------------------------------------------------------------- FPLAN USERS GUIDE Page 16 ------------------------------------------------------------------------------- SECTION F-1-2 - GENERAL HELP/TRAINING MENU OPTION #2: STARTING & OPERATING PROGRAM ------------------------------------------------------------------ To Start the Program: At the DOS prompt > for the Drive where the program is located, type RETIRE and Press Return. If while operating the program you incurr the following messages: Type mismatch in module XXXXX at address XXX:XXX - Hit any key to return to system - means there is a problem with the program. Reinstall program if on a hard-disk and/or try again. If the Problem is still present, contact your distributor or us for a replacement program disk. File not found in module XXXXX at address XXX:XXX - Hit any key to return to system - means there is a file missing from yout disk or sub-directory. The following programs need to be present for the program to work: RETIRE.EXE and RETIRM.EXE If you do not have files, contact your distributor or us for a replacement program disk. ------------------------------------------------------------------------------- SECTION F-1-3 - GENERAL HELP/TRAINING MENU OPTION #3: STOPPING PROGRAM ---------------------------------------------------------------------- THREE WAYS CAN BE USED TO EXIT THE PROGRAM: 1. Normally use Option #5 of the Main Menu of Options. In the planning Module use Option #3 (Not Saving New/Changed Data) or Option #5 (Saving New/Changed Data) to Return to Main Menu of Options. 2. While any place in the Program, Hold CTRL and Press the Break Key. *Break* Hit any key to return to system - will appear. No New or Changed Data will be saved and when the program is restarted, it will start at the last main menu used. 3. While any place in the Program, Turn OFF your Computer Systems. No New or Changed Data will be saved and when the program is restarted, it will start at the last main menu used. (Suggest ONLY using Item One for EXIT of the Program) ------------------------------------------------------------------------------- SECTION F-1-4 - GENERAL HELP/TRAINING MENU OPTION #4: PRINTING -------------------------------------------------------------- PRINT THE SCREEN: ON MOST SYSTEMS=Hold Shift Key and Press PrtSc KEEPS PRINTING SAME ILLUSTRATION OVER & OVER: Usually Problem with a Damaged Disk or Program. TRIED TO PRINT BUT DISPLAYED MESSAGE: Device fault/timeout in module XXXXX at address XXX:XXX - Hit any key to return to system - means: Printer was NOT ON, NO PAPER or PAPER JAM. You need to fix the problem and start over. Any changed or new data will not be saved. ------------------------------------------------------------------------------ FPLAN USERS GUIDE Page 17 ----------------------------------------------------------------------------- DOES NOT PRINT AND HAS STRANGE SCREEN MESSAGES: Problem with Computer or Printer. Try Turning OFF then Turning ON Printer. NOTE: THIS WILL ALSO CLEAR PRINT BUFFER OF TEXT. SPACING OF TEXT IS NOT CORRECT: Problem with Printer Dip Switches. Need to Refer to Your Printer Manual. SPACING OF PAGES IS NOT CORRECT: See Spacing of Text Above or If You Have a LAZER PRINTER it needs to be setup in MAIN UTILITIES MENU #3. ------------------------------------------------------------------------------- SECTION F-2 - RETIREMENT PLANNING MODULE HELP/TRAINING MENU ----------------------------------------------------------- This Menu can be reached from the RETIREMENT PLANNING MODULE using Option #2 (Module Utilities/Edit Menu) - and choosing Option #5 (Module Help/Training). 1. GENERAL: EXPLAIN PURPOSE OF MODULE (Benefits to You) 2. OPTIONS MENU: EXPLAIN SELECTED OPTION (Printing of Illustrations, Questionnaires, Input of Data, Saving and Exiting Program) 3. SPECIAL FEATURES: SPECIAL OPTION AND INPUT FEATURES 4. UTILITIES/EDIT MENU: EXPLAIN SELECTED OPTION (Editing, Deleting Data, Changing Modes from/to Current & Current vs. Proposed and the Module Help/Training Module) 5. EXPLANATIONS: RATIONAL FOR COMPUTATIONS IN MODULE 6. NORMAL PROBLEMS: WHAT USUALLY CAUSES INACCURATE RESULTS ............................................................................... MODULE HELP/TRAINING MENU SEE DETAILS IN SECTION ------------------------- ---------------------- 1. GENERAL:........................................... F-2-1 2. OPTIONS MENU:...................................... F-2-2 3. SPECIAL FEATURES:.................................. F-2-3 4. UTILITIES/EDIT MENU:............................... F-2-4 5. EXPLANATIONS:...................................... F-2-5 6. NORMAL PROBLEMS:................................... F-2-6 ------------------------------------------------------------------------------- SECTION F-2-1 - MODULE HELP/TRAINING MENU OPTION #1: GENERAL ------------------------------------------------------------ THIS MODULE WILL SHOW RETIREMENT INCOME REQUIRED ADJUSTED FOR INFLATION. GROWTH OF RETIREMENT ITEMS AND FUTURE INCOME. NET AMOUNT BASED ON RATE OF RETURN ASSUMTIONS AND IF SHORT, THE THE AMOUNT OF FUNDING REQUIRED BOTH AS A LUMP SUM AND YEARLY DEPOSIT AMOUNT. AN ANNUITY OPTION IS OFFERED IN THE PROPOSED MODE. ------------------------------------------------------------------------------- SECTION F-2-2 - MODULE HELP/TRAINING MENU OPTION #2 MODULE OPTIONS MENU ----------------------------------------------------------------------- SEE SECTION D-2 ------------------------------------------------------------------------------- FPLAN USERS GUIDE Page 18 ------------------------------------------------------------------------------- SECTION F-2-3 - MODULE HELP/TRAINING MENU OPTION #3: SPECIAL FEATURES --------------------------------------------------------------------- AFTER INPUT OF ECONOMIC ASSUMPTIONS (F1-F3), THE AFTER-TAX RATE USED IN COMPUTATIONS WILL BE DISPLAYED. THIS RATE IS APPLIED TO THE EARNINGS ON ANY NON-QUALIFIED (OTHER THAN PENSIONS, IRAS, ANNUITIES, ETC.) AMOUNTS AND AFTER RETIREMENT DISTRIBUTIONS. Current Situation: F(1) CURRENT BEFORE-TAX Yield Rate:............. % NEW RATE (PRESS RETURN FOR SAME):.......... % F(2) CURRENT Annual Inflation Rate:.............. % NEW RATE (PRESS RETURN FOR SAME):.......... % F(3) CURRENT Marginal Tax Bracket:............... % NEW RATE (PRESS RETURN FOR SAME):.......... % (HINT) If you desire to change a number to 0, Just Input .000001) Proposed Situation: F(1) CURRENT BEFORE-TAX Yield Rate:............. % * PROPOSED RATE (AS INDICATED):............... % NEW PROPOSED RATE (RETURN FOR SAME *):...... % F(2) CURRENT Annual Inflation Rate:.............. % * PROPOSED RATE (AS INDICATED):............... % NEW PROPOSED RATE (RETURN FOR SAME *):...... % F(3) CURRENT Marginal Tax Bracket:............... % * PROPOSED RATE (AS INDICATED):............... % NEW PROPOSED RATE (RETURN FOR SAME * ):..... % ............................................................................... AT INPUT H(3) INCOME DESIRED CAN BE ADJUSTED FOR FUTURE INFLATION AFTER RETIREMENT USING AVERAGE OF AGE AT RETIREMENT AND A FUTURE AGE. Current Situation: H(3) Desired RETIREMENT INCOME Per Month: ENTER AMOUNT DESIRED IN CURRENT DOLLARS:......... $ NOTE: Based on Retirement age (XX) and Inflation Rate of XX%, the Projected Required Income at Retirement in XX years will be $ XXXXX per month. This figure does not account for any inflation during retirement. As a suggestion, you have the option to use an average figure for the amount and a future amount say at age 85. To do this input the age at which you want the average based or just press return to not use. FUTURE AGE TO USE WITH RETIREMENT AGE FOR AVERAGE:.... New Adjusted Monthly Required Income at Retirement will be $ XXXXX ------------------------------------------------------------------------------ FPLAN USERS GUIDE Page 19 ------------------------------------------------------------------------------ Proposed Situation: H(3) Desired RETIREMENT INCOME Per Month: CURRENT DESIRED MONTHLY INCOME:.................. $ PROPOSED INCOME (TYPE 1 IF SAME AS CURRENT):..... $ NOTE: The Current Situation is NOT using an Average between Retirement Age XX and ANY Age ---- OR ---- NOTE: The Current Situation is using the Average between Retirement Age XX and Age XX to Allow for future inflation in Retirement Income Required. To Apply the Strategy to the Proposed Requirement, Input Age for the application of the average or Just Press Return to Not Use. FUTURE AGE TO USE WITH PROPOSED RETIREMENT AGE FOR AVERAGE:.... .............................................................................. AT INPUT H(4) SOCIAL SECURITY AND H(5) RETIRE INCOME, CAN ADJUST FOR ANY INFLATION RATE FOR INCREASE IN BENEFITS AMOUNTS. Current Situation: H(4) CURRENT Est Monthly Social Security Benefits:... $ NOTE: Table Amounts of Monthly Benefits are Approximate Amounts in TODAYS Dollars. If you want to show an amount increased by a percentage per year until retirement, enter that percentage. If no increase is desired, just Press Return. CURRENT Yearly Rate of Increase for Benefits:... % Proposed Situation: H(4) CURRENT Est Monthly Social Security Benefits:... $ Adjusted for Yearly Increase in Benefits of:.... XX% PROPOSED Benefits (TYPE 1 IF SAME AS BASE RATE). $ PROPOSED Yearly Rate of Increase ( 1 IF SAME):.. % Current Situation: H(5) CURRENT Monthly Other Retirement Benefits:...... $ NOTE: If Benefit Amount is Amount at Retirement, just Press Return. If Benefit Amount needs to be adjusted, input percentage amount of yearly increase until retirement. CURRENT Yearly Rate of Increase for Benefits:... % Proposed Situation: H(5) CURRENT Monthly Other Retirement Benefits:...... $ Adjusted for Yearly Increase in Benefits of:.... XX% Adjusted for Yearly Increase in Benefits of:.... XX% PROPOSED Benefits (TYPE 1 IF SAME AS BASE RATE). $ PROPOSED Yearly Rate of Increase ( 1 IF SAME):.. % ------------------------------------------------------------------------------- FPLAN USERS GUIDE Page 20 ------------------------------------------------------------------------------ AT INPUT H(11) SALE OF ASSETS AT RETIREMENT (HOME, BUSINESS, ETC.):.. $ INPUT NET PROCEEDS OF SALE AMOUNT AT TIME OF RETIREMENT. Current: H(11) Sale of Assets at Retirement (Home,Business, etc)$ Need Input or 0 Proposed: H(11) Sale of Assets at Retirement (Home,Business, etc)$ Shows Current PROPOSED Sale of Assets (TYPE 1 IF SAME):....... $ Need Input or 0 .............................................................................. IN THE PROPOSED MODE, IF THERE IS A SHORTAGE, OPTION 6 ALLOWS TO CHOOSE AN ANNUITY TO FUND THE RETIREMENT SHORTAGE AMOUNT. WILL RECOMPUTE LUMP-SUM AND YEARLY DEPOSIT AMOUNTS BASED ON THIS COST. ANNUITY OPTION CONSIDERATION ANALYSIS ------------------------------------- PROPOSED SITUATION (Only Available in Proposed Mode) ------------------ BASED ON FUNDING NEED OF: $ xxxxx PER MONTH OR $ xxxxxx PER YEAR - AT RETIREMENT AND A CURRENT AFTER-TAX RATE OF RETURN OF:...... xx.xx$ ENTER COST FOR PROPOSED ANNUITY TO FUND INCOME REQUIREMENTS AT RETIREMENT. (PRESS RETURN TO CANCEL ANNUITY OPTION):.. $ Input Amount or 0 LUMP-SUM NOW TO INVEST:................... $ Will Compute YEARLY DEPOSIT REQUIRED TO MEET GOAL:..... $ Will Compute CURRENT AFTER-TAX RATE (EXCEPT FOR IRA/PENSION/ANNUITY):.... xx.xx% PROPOSED AFTER-TAX RATE (EXCEPT FOR IRA/PENSION/ANNUITY):... xx.xx% (NOTE: This Can Be Changed in EDIT DATA # 1) (Also See Section D-2-6) ------------------------------------------------------------------------------- SECTION F-2-4 - MODULE HELP/TRAINING MENU OPTION #4 UTILITIES/EDIT MENU ----------------------------------------------------------------------- SEE SECTION E ------------------------------------------------------------------------------- SECTION F-2-5 - MODULE HELP/TRAINING MENU OPTION #5: EXPLANATIONS ----------------------------------------------------------------- AFTER TAX RATE FOR CALCULATIONS: THE ASSUMED BEFORE TAX RATE OF RETURN TIMES 1-THE ASSUMED MARGINAL TAX BRACKET. MARGINAL TAX BRACKET: THE RATE THE NEXT DOLLAR OF INCOME IS TAXED AT. ------------------------------------------------------------------------------- FPLAN USERS GUIDE Page 21 ------------------------------------------------------------------------------- BALANCE OF CASH.../IRA.../PENSION.... : IS CURRENT AMOUNTS ADJUSTED FOR GROWTH RATES AS INDICATED WITH BALANCE AT RETIREMENT. INCLUDES ANY YEARLY ADDITIONS INDICATED. MONTHLY EARNINGS ON CASH.../IRA.../PENSION... : IS FUTURE AMOUNT AT THE COMPUTED AFTER TAX RATE OF RETURN. NET AMOUNT: AMOUNT IN FUTURE DOLLARS THAT SOURCES ARE -SHORT OR OVER INCOME DESIRED IN FUTURE INFLATION ADJUSTED DOLLARS. AT RETIREMENT MONTHLY INCOME TO FUND: INFLATION ADJUSTED SHORTAGE AMOUNT TO PROVIDE FOR DESIRED INCOME NEEDED IS: TOTAL AMOUNT AT RETIREMENT THAT IS NEEDED TO FUND MONTHLY AMOUNT WITHOUT DEPLETEING ASSETS. (TO SHOW DEPLETION, USE THE ANNUITY OPTION) ------------------------------------------------------------------------------- SECTION F-2-6 - MODULE HELP/TRAINING MENU OPTION #6: NORMAL PROBLEMS -------------------------------------------------------------------- INPUT OF DECIMALS i.e. .28 INSTEAD OF WHOLE NUMBERS i.e. 28 INPUT OF CURRENT AGE EQUAL TO OR OLDER THAN AGE TO RETIRE. USING YEARLY FIGURES INSTEAD OF MONTHLY FIGURES. INPUT OF H(11) SALE OF ASSETS USING NET PROCEEDS AS OF TODAY INSTEAD ------------------------------------------------------------------------------- SECTION G - TECHNICAL INFORMATION --------------------------------- ------------------------------------------------------------------------------- SECTION G-1 - GENERAL & SYSTEM REQUIREMENTS ------------------------------------------- To operate this program you need: 1. An IBM or Compatable PC computer with at least 256K RAM. 2. DOS Operating System Version 2.0 or higher. 3. If you desire to print you may use a regular or laser printer. The program may be installed on a hard-disk, if desired. You would need to set up a sub-directory and copy the files to it. See your Operating Manual. ------------------------------------------------------------------------------- FPLAN USERS GUIDE Page 22 ------------------------------------------------------------------------------- SECTION G-2 - FILES LISTING --------------------------- The following files MUST be present on your disk/sub-directory for the program to function correctly: RETIRE.EXE RETIRM.EXE The following files MAY be present on your disk/sub-directory for the special functions as outlined below: You may delete them to save space, if desired. README.1ST Initial operating instructions. ORDER.BAT ORDER.FRM Files to print registration/order form. UGUIDE.BAT UGUIDE.TXT Files to Print this Users Guide. PAGE.COM File that controls screen scrolling. (There may be a VENDOR.BAT and VENDOR.TXT file which pertains only to Shareware Vendors for marketing and should have been deleted from your distribution Disk) The following files MAY be present on your disk/sub-directory after you have used the program and should not be deleted. OPNS.CTR Control file for program functions. RET(1-10).DAT Data files of your Saved Data. ------------------------------------------------------------------------------- FPLAN USERS GUIDE Page 23