13240	Error
13241	Out of memory.
13242	%d is not a valid entry.  Please specify a value between %d and %d for this field.
17074	Configuration operation was cancelled by user
17090	%1
17091	%1 %2
17167	Close
17438	Internal error in NCPA.CPL: LMUICMN DLL Initialization failed
17460	CONTROL.HLP
17500	&Trap Destination
17501	&Trap Destination for %1
17502	%1 is an invalid Trap Destination.
17510	Invalid TCP Domain Name.
17545	Lan Adapter number information mismatch in Configuration Registry
17550	Unknown network card.
17551	IP address must be unique for each network card.
17552	You must specify a name in the Domain Name Service (DNS) Search Order.
17553	At least one of the adapter cards has an empty Primary WINS address. Do you want to continue?
17554	Your default gateway does not belong to one of the\nconfigured interfaces. Do you want to change it?
17555	TCP/IP is not completely configured.  If you cancel now, TCP/IP will be disabled.  Do you want to cancel TCP/IP configuration?
17556	The LANA number of each protocol must be unique.
17558	LANA numbers must be less than 128 for each protocol.
17559	Invalid host name.
17560	Invalid IP or Subnet Mask address.
17561	Cannot open the %1 file. Please make sure that you specified the correct path for the LMHOSTS file.
17562	Please enter the path for your LMHOSTS file first.
17563	Network identifications must be unique. Please check your subnet mask.
17564	Cannot create %1 file.
17565	Setup cannot load NetBIOS information. Please continue the network installation and then select Network in Control Panel to configure the NetBIOS interface.
17566	Hewlett-Packard Network Port
17567	Close
17568	The DHCP protocol will attempt to automatically configure your workstation during system initialization. Any values other than the IP Address and Subnet Mask of this computer that are specified in these configuration dialogs will be used instead of the values obtained by DHCP. Do you want to enable DHCP?
17569	0.0.0.0 is an invalid Default Gateway address.
17570	The File Transfer Protocol relies on the ability to pass user passwords over the network without data encryption.  
17571	A user with physical access to the network may be able to examine users' passwords during FTP validation.  
17572	Are you sure you want to continue?
17575	You must specify a username and password if allowing anonymous connections.
17576	The Home Directory specified is invalid.
17577	The maximum number of connections is invalid
17578	The maximum timeout setting is invalid
17590	%1KB
17591	You don't have enough disk space. Please remove some TCP/IP components.
17592	DHCP enables automatic configuration of TCP/IP parameters for your computer. Your internetwork must have a DHCP server if you want to take advantage of this feature.
17593	Choose Continue to add the selected TCP/IP components to your system.
17594	Choose Cancel to return to Network Settings dialog box.
17595	Choose Help to see more detailed information about the TCP/IP components listed in this dialog box.
17598	TCP/IP connectivity utilities include finger, FTP, r* commands, Telnet, etc.
17599	The SNMP service allows your computer to be administered remotely using remote management tools. SNMP also allows you to monitor TCP/IP statistics using Performance Monitor.
17600	TCP/IP network printing support allows your computer to share and print directly to UNIX print queues or direct-connect network printers using TCP/IP.
17601	The FTP Server service allows you to share files over the network with any remote system that supports the file transfer protocol (FTP) and TCP/IP.
17602	The simple TCP/IP services include echo, daytime, chargen, and discard, which allows your computer to respond to requests from other computers that support these protocols.
17603	The DHCP Server service provides automatic configuration and addressing for Windows TCP/IP computers on your internetwork. Choose this option to make this computer a DHCP server.
17604	The WINS Server service provides a dynamic name service for computers on your Windows internetwork. Choose this option to make this computer a WINS Server.
17608	At least one of your network adapters has automatic DHCP configuration enabled. In order to correctly install the DHCP Server, setup will disable automatic DHCP configuration. Are you sure you want to install the DHCP Server?
17610	Select the network adapter for which you want to configure advanced options.
17611	Type additional IP addresses for the selected network adapter.
17612	This list specifies the IP addresses assigned to the selected network adapter.
17613	Type an IP address for an additional gateway for the selected network adapter.
17614	At least one of your network adapters has automatic DHCP configuration enabled. In order to correctly install the WINS Server, setup will disable automatic DHCP configuration. Are you sure you want to install the WINS Server?
17615	This list specified the Default Gateways assigned to the selected network adapter.
17616	Choose this option to use any DNS servers specified in the DNS Configuration dialog box to resolve Windows Network names.
17617	The Scope ID allows you to specify a NetBIOS over TCP/IP (NBT) scope identifier for your computer. This value is usually left blank.
17618	Choose this option to allow this computer to participate with other routers on the network running the RIP protocol.
17619	Adds the IP address for the specified gateway to the Default Gateways list.
17620	Removes the selected IP address for a gateway from the Default Gateways list.
17621	Increases the priority of the selected gateway in the Default Gateways list.
17622	Decreases the priority of the selected gateway in the Default Gateways list.
17623	Adds the specified IP address to the IP address list.
17624	Removes the selected IP address from the IP address list.
17625	Choose this option to allow clients configured for broadcast resolution to use this computer as gateway to a WINS Server.
17626	Choose OK to commit all changes you made to the Advanced TCP/IP configuration in this dialog box.
17627	Choose Cancel to discard changes you made to the Advanced TCP/IP configuration in this dialog box.
17628	Choose Help to see more detailed information on about the Advanced TCP/IP configuration options in this dialog box.
17629	Choose this option to use LMHOSTS file to resolve Windows Network names.
17630	Select the network adapter that you want to configure. This list contains the network adapters on this computer.
17631	DHCP enables automatic configuration of TCP/IP parameters for your computer. Your internetwork must have a DHCP server running if you want to take advantage of this feature for easy configuration.
17632	The IP address identifies the selected network adapter on the TCP/IP network. The network administrator should provide this value.
17633	The subnet mask identifies network membership for your computer and your host ID. The network administrator should provide this value.
17634	The default gateway routes TCP/IP traffic to remote destinations. The network administrator should provide this value, which is the IP address of your local gateway.
17636	Choose OK to commit all changes you made to the TCP/IP network configuration in this dialog box.
17637	Choose Cancel to discard changes you made to the TCP/IP network configuration in this dialog box.
17638	Choose DNS to configure your computer to use Domain Name System (DNS) servers for hostname resolution on your network.
17639	Choose Advanced to configure the advanced TCP/IP options, which includes static routes.
17640	Choose Help to see more detailed information about the TCP/IP components listed in this dialog box.
17641	Your computer will use the primary Windows Internet Name Service (WINS) Server to resolve Windows Network names.
17642	If the primary WINS Server is unavailable on your network, the secondary WINS server will be used to resolve Windows Network names.
17643	Choose this option to enable RIP Routing.
17644	To enable Rip Routing. Your system need to have at least 2 network adapter cards.\n\nYou also need to install IP Rip Routing software from network control panel and enable the IP Routing checkbox.
17645	To enable Relay Agent.
17646	To config Relay Agent.
17647	To enable Relay Agent, install Relay Agent software from network control panel.
17648	Relay Agent requires at least one DHCP Server IP address.
17649	Rip Routing requires static IP addresses. Do you want to reconfigure your IP address?
17650	Rip Routing requires static IP addresses for all adapters.  At least 1 adapter has Automatic DHCP configuration enabled for its IP address.
17651	The hostname is used by TCP/IP connectivity utilities (such as rexec) to identify your local computer.
17652	The domain name is used with the hostname to produce a fully-qualified domain name (FQDN) for connectivity utilities (such as rexec). Example: microsoft.com
17658	Type the IP address of a DNS server that you want to add to the DNS Server search list. The network administrator should provide this value.
17659	Adds the specified DNS server to the DNS Server search list.
17660	Removes the selected DNS server from the DNS Server search list.
17661	This list specifies, in priority order, the DNS servers to be used for resolving hostnames.
17662	Type a domain suffix to add to the domain suffix list. The network administrator should provide this value.
17663	This list specifies, in priority order, the domain suffixes to be applied to hostnames during hostname resolution.
17664	Adds the specified domain suffix to the Domain Suffix search list.
17665	Removes the selected domain suffix from the Domain Suffix search list.
17666	Choose OK to commit all changes you made to the DNS network configuration in this dialog box.
17667	Choose Cancel to discard changes you made to the DNS network configuration in this dialog box.
17668	Choose Help to see more detailed information about the DNS configuration options in this dialog box.
17669	Increases the priority of the selected DNS server in the DNS Server search list.
17670	Decreases the priority of the selected DNS server in the DNS server search list.
17672	Increases the priority of the selected domain suffix in the Domain Suffix search list.
17673	Decreases the priority of the selected domain suffix in the Domain Suffix search list.
17674	Do you want to use DHCP service to configure your IP Addresses?
17675	Import LMHOSTS file to current system.