README.TXT
SPRYNET

Installing SPRYNET
==========================
 1  Start Windows and insert Disk 1 into the appropriate drive.
 2  Click the Start button, and then click Run.
 3  In the Open box, type the path to the setup program (for example, a:\setup 
    for a floppy diskette) and click OK.
 4  Follow the instructions on the screen to configure SPRYNET and set up an Internet account.



Possible installation problems
==============================
If you have problems running the setup program, restart Windows and try again.

You will not be able to install SPRYNET over a network. You will have to perform
individual installations at each work station.



Registration Problems
=====================
If you are installing and registering during peak hours, you may see the message
"Error #451: Mail Server is Busy." Click OK, and retry. It make take several times
before you can register, depending on the volume of traffic.

Windows NT
If you are installing on Windows NT and select the LAN transport option, your
software will not be registered, but it will function properly. Should you need
to contact Technical Support at some time, you can register your software then.

You will also not be able to create an Instant Internet Access account with 
SPRYNET if you are installing on Windows NT using the LAN transport. In order
to create an Instant Access account, you will need to install and select the PPP
transport option.



Setup
=====
If you are upgrading from Mosaic in a Box or a Mosaic Direct product, you will be able to 
create an e-mail account. You will be asked to request an e-mail username during the 
setup procedure. The online help has more information on choosing an e-mail username.



Contacting technical support
============================
You can reach support by calling:
 * 206-957-8997
Or send email to:
 * service@sprynet.com