install_dir  19
code         2 31 3 4 5 10
set_ops      22 23 24 25 28 26 26 27 1 1 1
vid_ops      32 33 1 1
pwrup_ops    23 23 23 23 23 23 23
cur_ops      32 32 32 32 32 32 32 32 32 32 32 32 32
tst_ops      8 8 11 12
drv_ops      15 15 15 17 18 18 16 20 21 30 36
mouse        25 25 25
intlev       7 7 7 7
rom          24 24
vmodsel      1 1 1
emodsel      1 1 1
vga_cmode    1 1
ega_cmode    1 1
forgnd       1 1 1
screen       34 34
monitor      29
mchoice      1 1 1
VW_cmode[0]  1 1
VW_cmode[1]  1 1
VW_mmode[0]  1 1 1 1
VW_mmode[1]  1 1 1 1
egapri       1 1 1
egasec       1 1
time         35
utils        13
ressup       14
zrom	     26 26
zvram        26 26
io_ops	     27 27
more         37 38 39 1 1 1 1 1


1
HELP information not available for this item.


2
You can change power-up configuration for your
display adapter.  Changes are permanent until
altered by this option again.


3
You can select a mode and save as Current Video Mode.
You can also activate the Screen Save feature.
Once changed, new settings take effect until
changed again or until the computer is reset.


4
With this option,  you can test the functionality of your
display adapter,  as well as obtain information on your system
and your display adapter,  which may be required if you are
reporting problems to our Customer Support representative.


5
Utilities for the display adapter can be installed to a
designated directory on a hard disk for frequent use.


6
Use this option to install display drivers for the chosen application.


7
Suitable value for the IRQ number is dependent on the type of
computer in which the display adapter is installed,  whether
the mouse port uses a primary or secondary address,  and
software requirement.
   
Recommended values are as follows:
   
                  PC     AT/MC
     Primary       5       2
     Secondary     4       4


8
A series of screen patterns will be displayed.  Carefully observe
each screen for anything wrong in colors, fonts, and patterns.


10
This entry allows users to install high resolution display drivers
for the selected application software.  For a list of applications
supported,  exit this help message and press <Enter>.  When you see
the "Install Video Drivers" menu,  highlight the application of
interest and press <F1> to display a short installation procedure.


11
Select this option when you want to verify if your mouse is
working properly with the current IRQ setting.  It allows
you to check for mouse motion and button response.


12
This option displays information about your computer and the power-
up configuration of your display adapter.  Send this information
to our Customer Support representative when you report problems.
It may help identify the problems.


13
This entry should contain a full path,  in this format:
   
           d:\dirname
    
where d is the drive letter;  dirname is the directory name
starting from the root (i.e. the leading "\" must be present).
   
All utilities for the display adapter will be copied to this
directory.  If the directory does not exist, this installation
program will create one for you.


14
Allows fine tuning of screen positioning and size.  New timing 
parameters will be saved to the EEPROM of your display adapter.
DO NOT experiment with the horizontal and vertical sync polarity.
The loss of sync may damage your monitor.


15
DRIVER INSTALLATION PROCEDURE FOR AUTOCAD/AUTOSKETCH/AUTOSHADE:

1) This installation program assumes you have installed an AutoCAD/
   AutoSketch/AutoShade directory on your hard disk.

2) An ADI driver will be copied to the AutoCAD/AutoSketch/AutoShade
   directory,  depending on the capability of your display adapter.

3) Exit to DOS and run (for initial set up):
   ACAD for AutoCAD; ASKETCH for AutoSketch; ASHADE for AutoShade.
   

FOR AUTOCAD/AUTOSHADE 386 PROTECTED MODE:

1) The driver and related files will be copied to an existing
   directory on your hard disk.  Create a directory for use.

2) Further instructions will be given to configure the driver.
   

ADI DRIVER COMMAND LINE OPTIONS

If you run an ADI driver with the command line option "h",  you
will see explanation of all available options.  This installation
program automatically makes use of them.  If you wish to further
fine tune your driver,  the following information may be helpful:

** The '2' option reassigns the 16-color patterns to the 256-
   color patterns (for 16-color drivers only).

   CAUTION: You will find that if you select this option and your
   drawing uses a color number higher than 9, the color is
   displayed  differently because of the  reassignment  of colors.


16
DRIVER INSTALLATION PROCEDURE FOR NON-NETWORKED WINDOWS:

1) This installation program assumes you have installed a Windows
   directory on your hard disk.  If you haven't,  install one,
   preferably with "VGA" as the type of "Display".

2) All drivers and related files will be copied to your existing
   Windows directory on the hard disk.

3) Exit to DOS.  Go to your Windows directory and run SETUP.
   

DRIVER INSTALLATION PROCEDURE FOR NETWORKED WINDOWS:

1) This installation program assumes there is a properly installed
   shared copy of Windows on the network as well as a local copy of
   Windows installed preferably with "VGA" as the type of "Display".

2) All drivers and related files will be copied to the local Windows
   directory.

3) Exit to DOS.  Make sure both the shared and the local Windows
   directories are included in the PATH.  Go to the local Windows
   directory and run SETUP.
   

SPECIAL NOTE FOR 32768 COLOR WINDOWS DRIVER

Some Windows application programs attempt to determine the number
of  colors  available  on the display by  enquiring  the  display
driver.  The 32768 color driver naturally gives the answer 32768,
which  unfortunately  is interpreted as a  negative  quantity  by
certain  application  programs,  resulting in odd colors  on  the
screen.  Here is a list of these programs:

o  WINDOWS PAINTBRUSH
   The  PALETTE appears as shades in black and white.  For  the
   colors to reappear,  follow this sequence:

      Go to Options menu
      Select Image Attributes
      Change setting to Colors
      Go to File menu
      Select New

o  TETRIS
   The screen appears in black and white.  The colors may  look
   different  than  normal.  Don`t panic.  The  game  is  still
   good.  Play as normal.


17
DRIVER INSTALLATION PROCEDURE FOR GEM DESKTOP:

1) This installation program assumes you intend to install a brand
   new GEM directory on the hard disk.  Back up any existing GEM
   data files.

2) Make a back-up copy for each of the original GEM distribution
   diskettes.  Put away the originals.  Use the copies for
   installation.

3) After selecting a desired GEM version and display resolution,
   the appropriate driver will be copied to a GEM diskette.

4) The GEM installation program,  GEMPREP or GEMSETUP will be
   executed and a new GEM directory will be set up.


18
DRIVER INSTALLATION PROCEDURE FOR LOTUS 1-2-3 AND SYMPHONY:

1) This installation program assumes you have installed a Lotus 1-2-3
   or Symphony directory on your hard disk.  If you haven't, install
   one.

2) 3 drivers will be copied to your Lotus 1-2-3 or Symphony directory:

   LOTUS23B.DRV   for 132x25 Text mode in 16 colors
   LOTUS33B.DRV   for 132x44 Text mode in 16 colors
   LOTUS37B.DRV   for 132x44 Text mode in Black/White

3) The file SINGLE.LBR will be deleted for:
    Lotus 1-2-3    Ver. 2.0 and
    Symphony       Ver. 1.1

4) Exit from this installation program to DOS.

5) Go to your Lotus 1-2-3 or Symphony directory and run Lotus INSTALL.
   Follow the instructions given by this installation program.


19
This entry allows the user to enter the directory that contains
all the auxiliary files from the diskette(s) supplied with the
display adapter.  Normally you would enter the floppy drive to
which you will insert these diskette(s).  However,  if you have
already transferred all files from these diskette(s) to a
directory on your hard disk,  simply enter the full path
(including the drive letter and the leading "\") to that
directory,  e.g.


20
DRIVER INSTALLATION PROCEDURE FOR VENTURA PUBLISHER:

1) The Ventura Installation program, VPPREP, will be executed first.

2) The appropriate driver will be copied to the Ventura directory
   on the hard disk.

3) The Ventura batch file VP.BAT or VPPROF.BAT will be modified to
   make use of the high resolution driver.

4) Exit from this installation program to DOS.  The first time you
   run Ventura,  you may encounter some problems.  You may need to
   edit the batch file to adjust some parameters,  e.g. /A=


21
DRIVER INSTALLATION PROCEDURE FOR VERSACAD:

1) This installation program assumes you have installed a VersaCAD
   directory on your hard disk.  If you haven't,  install one,
   with "EGA" selected for Screen Configuration.

2) The appropriate driver will be copied to the VersaCAD directory.
   If you selected any 255-color mode,  2 font files will also be
   copied:   FNT8X14.FNT and FNT8X8.FNT.

3) A batch file called AVCAD.BAT will be created based upon the
   original VersaCAD batch file.

4) Exit from this installation program to DOS.

5) Go to your VersaCAD directory and run VRUN for initial set up.

6) To use VersaCAD in high resolution mode,  run AVCAD.BAT.
   

SPECIAL NOTE ON FONTS:

If you selected any 255-color mode,  you will find the font file
FNT8X14.FNT included in the batch file AVCAD.BAT.  That means,
when you run VersaCAD,  your text font is default to 8x14 dots.
If you wish to use a smaller font,  edit AVCAD.BAT to use the
other font file,  i.e.  FNT8X8.FNT.
  

A FINAL NOTE:

All VersaCAD high resolution drivers are memory resident programs.
That means,  once a driver is loaded,  it will stay in the system
memory until reboot,  which is also the only way of cleaning up.


22
The video BIOS needs to know what monitor you are using for proper
screen display by adjusting parameters like screen positioning,
interlacing, horizontal and vertical synchronizations according to
different monitor types.


23
Select the desired initial text mode that follows a power-up.


24
The video BIOS ROM may be configured as 8-bit, or 16-bit to speed
up video related BIOS function calls.


25
Select a new mouse configuration if the current settings conflict
with other applications.


26
Normally wait states are added to peripheral ROM/RAM access cycles.
If your machine is capable of reading/writing ROM/RAM with no wait
state,  enabling zero wait state will improve your system
performance.


27
The I/O access on this display adapter may be defined as 8-bit,
or 16-bit to speed up operations like I/O read/write and image
transfer.


28
When you are using a TTL monochrome monitor,  you may wish to
adjust the gray scale that appears on the monitor to get the
best picture quality possible.


29
Scroll up or down to highlight your monitor.  Press <Enter>
to accept it.
    
If your monitor is not shown on this list, refer to the
documentation supplied with your monitor and select the
most compatible one from this list.
    
The highlighted monitor selection will be written to EEPROM
if you choose to save it.  It will stay in effect even after
reset or a power down.


30
DRIVER INSTALLATION PROCEDURE FOR MICROSOFT WORD (DOS VERSION):

1) Note that this program only installs a driver for DOS Version of
   Microsoft Word version 5.  It's not intended for Word for Windows.

2) This installation program assumes you have installed a Microsoft
   Word directory on your hard disk.  If you haven't,  install one.

3) A driver will be copied to that directory,  depending on the
   capability of your display adapter.

4) Exit to DOS.
   
   
SPECIAL NOTE FOR USERS OF WORD WITH MOUSE

If you are using a mouse when running Microsoft Word with a high
resolution driver installed,  you are advised to use the mouse
driver supplied with this display adapter package.  Other mouse
drivers may not support high resolution modes.  If your display
adapter does not come with a mouse,  don't worry.  The display
driver works fine without a mouse.


31
This entry loads "VGAFX.EXE" which allows the user to configure
and test the audio portion of the VGASTEREOþF/X. Make sure that
"VGAFX.EXE", "VGAFX.HLP", "LEFT.WAV", "RIGHT.WAV" and "SANI.WAV"
are in the same directory. If they are in the default directory,
they will be loaded automatically. If they are located elsewhere
(on a floppy, or if you are executing this program from other
than its home directory) this program will prompt you for the
drive and explicit path to that directory. If you do not know
this, exit this program and locate these files.


32
Select the text mode that you are now going to set.


33
With this option,  if you leave your system unattended for a
specified period of time,  the display will be blanked to
protect your monitor from burning.


34
With this option,  if you leave your system unattended for a
specified period of time,  the display will be blanked to
protect your monitor from burning.

Select "Enabled" if you want to activate the SaveScreen
feature.  Select "Disabled" if you previously enabled
this feature and now do not want it.


35
Enter the length of wait before the screen is blanked.  After
the screen goes off,  to bring it back on again,  simply hit
any key.


36
This option provides an additional list of application
software.


37
DRIVER INSTALLATION PROCEDURE FOR 3D STUDIO:

1) The driver and related files will be copied to an existing
   directory on your hard disk.  Create a directory for use.

2) Further instructions will be given to configure the driver.


38
DRIVER INSTALLATION PROCEDURE FOR MICROSTATION:

1) This installation program assumes you have installed a
   MicroStation directory on your hard disk.

2) The driver and related files will be copied to the MicroStation
   directory.

3) Follow the instructions given to configure the driver.


39
DRIVER INSTALLATION PROCEDURE FOR CADKEY:

1) This installation program assumes you have installed a
   CADKEY directory on your hard disk.

2) The driver and related files will be copied to the CADKEY
   directory.

3) Follow the instructions given to configure the driver.


-1
