[<<Previous Entry]
[^^Up^^]
[Next Entry>>]
[Menu]
[About The Guide]
FT_ENDCAP()
Cancel a specific NetWare print queue capture
------------------------------------------------------------------------------
Syntax
FT_ENDCAP( [ <nLPTPortNumber> ] ) -> lResult
Arguments
<nLPTPortNumber> is the captured LPT port to cancel. If the
parameter is omitted, the default port of LPT1: is used.
Returns
.T. if successful
Description
This routine is used to close a specific capture on the specified LPT
port. When this command is issued, the LPT port is no longer redirected
to the print queue, and any information waiting in queue to be printed
will be printed.
This routine was designed and written for Advanced NetWare 286 v 2.1 or
NetWare 386 v 3.0 or better. It has been tested on Advanced NetWare 286
v 2.15 rev A & C and NetWare 386 v 3.0.
This source code was written for Microsoft Macro Assembler v 5.1. It
should work with any assembler with minor modifications.
Examples
(in DOS)
F:>CAPTURE S=ServerName Q=PrintQueueName T=0 L=2
Device LPT2: re-routed to queue PrintQueueName on server ServerName.
F:>CAPTURE S=ServerName Q=PrintQueueName T=0 L=1
Device LPT1: re-routed to queue PrintQueueName on server ServerName.
(in your Clipper application)
FT_ENDCAP(2) // Closes LPT2: capture, and flushes print buffer
...
...
FT_ENDCAP() // Closes LPT1: (default) capture, and flushes
// print buffer
Source: ENDCAP.ASM
Author: James R. Zack
This page created by ng2html v1.05, the Norton guide to HTML conversion utility.
Written by Dave Pearson