Stirling Technologies, Inc.  (c) 1990-1994
SRCDIR
SRCDISK
TARGETDISK
TARGETDIR
WINDIR
WINDISK
WINSYSDIR
WINSYSDISK
ERRORFILENAME	
INFOFILENAME
SUPPORTDIR
CMDLINE
ISVERSION
SHARED
UNINST
ISRES
ISUSER
FOLDER_DESKTOP
FOLDER_STARTMENU
FOLDER_STARTUP
PROGRAMFILES
COMMONFILES9
LAST_RESULT
CMDVALUE
HINST_INSTALL
BATCH_INSTALL
LOGHANDLE
_sdRECT
right
bottom
WINRECTSTRUCT
origX
origY
_sdSIZE
SelectObject
GetTextExtentPoint
EnableWindow
GetClassName
GetDC
GetDlgItem
GetFocus
GetWindowLong
GetWindowRect
GetWindowWord
IsIconic
IsWindow
IsWindowEnabled
MoveWindow
USER	
ReleaseDC
SetFocus
SetWindowText
ShowWindow
LoadString
KERNEL
GetModuleHandle
GetClientRect
SetWindowPos
PostMessage
ShowCursor
SystemParametersInfo
GetKeyState
USER32
ExitWindowsEx
Keyboard%
setup.ini&
Wonder Toolsa
VersionR$
Unable to retrieve version number.A
Compaqa
Launch and Learnb$
Launch and Learn.exe
setup.ini&
Wonder Toolsa
SpaceRequiredR
Unable to retrieve spaceRequired.A
setup.ini&
Wonder Toolsa
Win31SpaceRequiredR
Unable to retrieve spaceRequired.A
Unable to convert spaceRequired to a number.A
Wonder\LaunchL\
Wonder Tools\Launch and Learn\
Unable to retrieve driveA
There is not enough disk space available on the b#
 drive.
Press OK to exit setup and then free up at least 
%i.%i megabytes of disk space before running setup again. %s requires %i.%i megabytes of disk space and setup temporarily needs %i.%i megabytes B.
Launch and LearnB/
of space.
Otherwise, press Cancel to change the a+
destination directory to a different drive.
Warningb&
Launch and LearnA
Launch and Learna
Could not record Uninstall information.A
Creating Program Folder and Icons....&
ReadMe.txt
Would you like to read the ReadMe.txt file now?A
Launch and Learna
 Read Me%
ReadMe.txt
Please review the following Read Me file for late breaking information on hardware compatibility issues and other important details.a+
Are you finished with the Read Me document?b&
The software portion of the installation is complete.  Click a<
the OK button to shut down your computer.  It is important  $
that you turn off the power to your computer BEFORE unplugging  $
your keyboard to install the new Wonder Tools $
 or you could damage your computer.
Please wait while Windows 95 shuts down.A
sd.exe3
Some files could not be updated because they are a2
currently in use by other programs on the system. $
Files in use will be updated the next time you restart $
your system.
Restart Windowsb
Setup is complete.  a
Launch and Learn$
 is in the Wonder Tools folder$
 located under the Programs folder.*
Setup is complete.  You may run a
Launch and Learn$
by double-clicking on the program icon.*
setupbg.bmp6
Launch and Learna
 Setup
This program requires VGA or better resolution.A
Could not obtain CPU type.A
Launch and LearnaG
 will not run on a 286 Processor.  A 486 or better processor is needed.*
Launch and LearnaG
 will not run on a 386 Processor.  A 486 or better processor is needed.*
You have an unknown Processor. You need an X86 class processor.A
You have an unclassified Processor. You need an X86 class processor.A
Could not obtain OS type.A
Launch and Learna;
 will not run in WindowsNT.  It will only run in Windows95.*
Launch and Learnaf
 will only run in Windows95. Setup is unable to determine your operating sytem.  Proceed with caution.*
Could not record application path information.A
Launch and Learn.exe
Could not record working directory.A
Wonder.inia
Lnchnlrn.exea
Pathb
Could not write Path value in wonder.ini.A
Lnchnlrn.exe
Wonder.inia
Lnchnlrn.exea
Could not write Exe value in wonder.ini.A
General
DATA32.Za
*.* in Data32.zb
DATA16.Za
*.* in Data16.zb
Copying program files.../
Software\Compaq\Wonder Tools\Launch and Learn\General
RegDBSetDefaultRoot failed in RhinoSettings.A
RegDBCreateKeyEx failed in RhinoSettings.A
RhinoSettings - Key does not exist.A
Preview\Preview.exeQ
PreviewPathA
Could not set value in RhinoSettings.A
Could not save SRCDIR and TARGETDIR in RhinoSettings() function.A
Goodies.za	
vlnld.386A
vlnld.386b
SYSTEM.INIa
386EnhR
SYSTEM.INIa	
vlnld.386R
DEVICE!
SYSTEM.INIa	
vlnld.386R
SYSTEM.INIa
386Enha
devicea	
vlnld.386!
Could not add vlnld.386 to the 386Enh section of a$
the system.ini. Setup will now quit.*
 not found.$
RhinoSettings FileGrep Error: File b%
RhinoSettings FileGrep Error: The line exceeds the a
maximum length allowed.*
RhinoSettings FileGrep Error: An unspecified error a
has occurred.*
RhinoSettings FileGrep Error: No clue.A
Could not restore SRCDIR and TARGETDIR in RhinoSettings() function.A
Preview\Previe16.exe%
lnchnlrn.inia
Generala
PreviewPathb%
Could not write PreviewPath value in lnchnlrn.ini.A
Could not restore Program Manager to its original size.A
Wonder ToolsN
Wonder ToolsA
Wonder Toolsa
Launch and Learnb
Launch and Learna
 Uninstaller
Wonder Toolsb
Uninst16.dll
Wonder Toolsb%
_ConfigureUninstInfo failed.A
Preview\Preview.exe
Wonder Toolsa
Launch and Learnb
Uninst.dll
Launch and Learnb%
_ConfigureUninstInfo failed.A
CopyFile: A target directory could not be created.  a0
Make sure that the path in the TARGETDIR system $
variable is syntactically correct and you have $
access rights to the target drive.
Filename: $
CopyFile: The function was unable to allocate the a4
memory required to complete the copy file process.  $
Terminate as many running applications as possible $
to free memory.
Filename: $
CopyFile: The function could not find enough disk a.
space on the target drive to copy the files.  $
Free disk space on the target drive.
Filename: $
CopyFile: The function was unable to open the input a3
file in the SRCDIR system variable.  Make sure the $
source file is a valid filename, and that the source $
file as well as the target directory exist.
Filename: $
CopyFile: The function was unable to copy the a
requested file.
Filename: $
CopyFile: The file in TARGETDIR is read-only.  a/
Remove the read-only attribute from the target $
file and try again.
Filename: $
CopyFile: Unable to open input file. Check the SRCDIR a0
and existence of the file in SRCDIR.
Filename: $
CopyFile: Unable to open output file. Check the a3
content of TARGETDIR, file existence in TARGETDIR, $
and access privileges to TARGETDIR.
Filename: $
CopyFile: Unable to write to file. Check integrity a2
of source and target disk.  Make sure the correct $
source disk is chosen.
Filename: $
CopyFile: Memory allocation error. Close other a
applications.
Filename: $
CopyFile: Source and target directories conflict. a3
Make sure that target directory is not the same as $
the source directory (unless this is intended).
Filename: $
CopyFile: File cannot be found in the packaging a+
list. Make sure this file is listed in the $
packaging list before compiling it.
Filename: $
CopyFile: Unable to create directory. Check the a.
content of TARGETDIR and access privileges to $
drive and directory.
Filename: $
CopyFile: Error occurred during defining a a
FileSet.
Filename: $
CopyFile: Private object error.
Filename: b
CopyFile: File transfer process aborted.
Filename: b
CopyFile: Not enough disk space on target drive. a,
Free disk space on target drive.
Filename: $
CopyFile: Target file is read-only. Target file a3
is read-only and cannot be overwritten.
Filename: $
CopyFile: A self-registering file did not register a
successfully.
Filename: $
CopyFile: Unknown Error: %d has a
occurred.
Filename: $
CompressGet: A target directory could not be created.  a9
Make sure that the path in the TARGETDIR system variable $
is syntactically correct and you have access rights to $
the target drive.
Filename: $
CompressGet: The specified target file does not exist a=
in the specified compressed library.  Use the InstallShield3 $
Data Compression Program (ICOMP.EXE at the DOS system $
prompt) with the -L (listing) option to view the contents $
of the compressed library and determine if the file $
specified is located in the library.
Filename: $
CompressGet: The library file is not compatible with a0
InstallShield3's compression format.
Filename: $
CompressGet: The function was unable to allocate the a4
memory required to complete the copy file process.  $
Terminate as many running applications as possible $
to free memory.
Filename: $
CompressGet: The function could not find enough disk a3
space on the target drive to copy the files.  Free $
disk space on the target drive.
Filename: $
Setup has been canceled.A
CompressGet: The function was unable to copy the a
requested file.
Filename: $
CompressGet: The specified nOptions is invalid.
Filename: b
CompressGet: The file in TARGETDIR is read-only.  a4
Remove the read-only attribute from the target file $
and try again.
Filename: $
CompressGet: Unknown error.
Filename: b
CompressGet: Unable to open input file. Check the a7
SRCDIR and existence of the file in SRCDIR.
Filename: $
CompressGet: Unable to open output file. Check the a3
content of TARGETDIR, file existence in TARGETDIR, $
and access privileges to TARGETDIR.
Filename: $
CompressGet: Unable to write to file. Check integrity a2
of source and target disk.  Make sure the correct $
source disk is chosen.
Filename: $
CompressGet: Input file not compressed with a4
InstallShield Compressor. Make sure that input is a $
compressed library created by the InstallShield3 Data $
Compression Program or an InstallShield3 function.
Filename: $
CompressGet: Memory allocation error. Close other a6
applications, reboot system and try again.
Filename: $
CompressGet: Header information of compressed file a2
is incorrect.Make sure file is compressed and not $
corrupted.
Filename: $
CompressGet: Cannot decompress more than one a1
compressed library. Make sure that the input for $
decompression is not a wildcard.
Filename: $
CompressGet: Source and target directories conflict. a3
Make sure that target directory is not the same as $
the source directory (unless this is intended).
Filename: $
CompressGet: Specified input file is a wild card a4
(not allowed in some APIs).Make sure the input is a $
specific file, not a wildcard.
Filename: $
CompressGet: Specified output file is a wild card a4
(not allowed in some APIs).Make sure the input is a $
specific file, not a wildcard.
Filename: $
CompressGet: Library compacting error.
Filename: b
CompressGet: Internal pointer error.
Filename: b
CompressGet: File size error.
Filename: b
CompressGet: Linked list error.If CompressEnum a/
returns this error, make sure a string list is $
created and passed to this function.  Otherwise, $
contact InstallShield Technical Support.
Filename: $
CompressGet: Output file not compressed with a3
InstallShield Compressor.Make sure the output is a $
compressed library.
Filename: $
CompressGet: File is compressed with an older a3
compressor version.Use a compatible InstallShield3 $
compressor.
Filename: $
CompressGet: An error occurred in the has table.
Filename: b
CompressGet: Directory information is incorrect.
Filename: b
CompressGet: Incorrect switch (options) used.Refer to a?
reference guide or type 'compress' for information.
Filename: $
CompressGet: Incorrect data information.
Filename: b
CompressGet: Unable to create directory. Check the a.
content of TARGETDIR and access privileges to $
drive and directory.
Filename: $
CompressGet: Query information error.
Filename: b
CompressGet: Error occurred during defining a FileSet.
Filename: b
CompressGet: File is split.Use the original a
compressed library.
Filename: $
CompressGet: Unable to launch an internal process.
Filename: b
CompressGet: Internal error.
Filename: b
CompressGet: Internal error.
Filename: b
CompressGet: Private object error.
Filename: b
CompressGet: File transfer process aborted.
Filename: b
CompressGet: Not enough disk space on target drive. a,
Free disk space on target drive.
Filename: $
CompressGet: File cannot be found in the packaging a5
list. Make sure this file is listed in the packaging $
list before compiling it.
Filename: $
CompressGet: Compressed library backup failure. a,
Free disk space on target drive.
Filename: $
CompressGet: Specified file is not a compressed a+
library. Make sure the specified file is a $
compressed library.
Filename: $
CompressGet: File is not in the compressed a1
library. Make sure all target files specified in $
the CompressGet functions exist in the compressed $
library.
Filename: $
CompressGet: Target file is read-only. Target file a3
is read-only and cannot be overwritten.
Filename: $
CompressGet: Internal memory error.
Filename: b
CompressGet: A self-registering file did not register a
successfully.
Filename: $
CompressGet: Unknown Error: %d has occurred.
Filename: b
Unable to create a directory under b
. Please check write access to this directory.*
The target file requested by a CompressGet function a4
call does not exist in the compressed library.  Use $
the InstallShield3 Data Compression Program (ICOMP.E$
XE at the DOS system prompt) with the -L (listing) $
option to view the contents of the compressed $
library to determine if the file specified is $
located in the library.*
An unknown error occurred during processing and the a
file set has been deactivated.*
The disk inserted in the drive was not the disk a0
requested by this function.  Prompt the user to $
enter the correct disk.*
InstallShield3 cannot launch an intermediate file a3
needed to proceed with the installation.  Recreate $
steps to determine exactly what caused the error $
and contact InstallShield Technical Support.*
An error occurred during the process of copying or a
decompressing files.*
The specified file is not listed in the packaging a5
list.  Make sure the file is listed in the packaging $
list, recompile the packaging list, and update the $
SETUP.PKG file on the first distribution disk.*
An error occurred previously in the specified file a1
set.  You need to call the FileSetReset function $
before performing this file set again.*
General file transfer error. a0
Please check your target location and try again.$
 Error Number: %d
 Related File: %s
FileInsertLine: The length of the line exceeds the maximum length allowed for text files.A
FileInsertLine: Unable to find the file in szFileName.A
FileInsertLine: The file is write protected.A
FileInsertLine: One of the line numbers specified is less than zero, or the line number does not exist in the file.A
FileInsertLine: There is insufficient space on the disk drive to complete the specified operation.A
FileInsertLine: An unspecified error has occurred.A
Unknown FileInsertLine error.
 Error Number: %iB
Could not save SRCDIR and TARGETDIR in InstallWinG() function.A
WinG.za
WinG32.dllB-
WinG32.dllb
SYSTEM.INIa
386EnhR
SYSTEM.INIa
DVA.386R
DEVICE!
SYSTEM.INIa
DVA.386R
WinG.za
*.*B-
*.* in WinG.zb
SYSTEM.INIa
386Enha
devicea
dva.386!
Could not add dva.386 to the 386Enh section of a$
the system.ini. Setup will now quit.*
Wonder Tools is testing for optimal display performance so that it will look its best on your system. This will take a few minutes, but you will only see it again if you change to new display settings.
SYSTEM.INIa
WinGa
ProfileMessageb
Could not add ProfileMessage to the WinG section of a
the system.ini*
WinG.za
*.*B-
*.* in WinG.zb
 not found.$
InstallWinG FileGrep Error: File b%
InstallWinG FileGrep Error: The line exceeds the a
maximum length allowed.*
InstallWinG FileGrep Error: An unspecified error a
has occurred.*
InstallWinG FileGrep Error: No clue.A
Could not restore SRCDIR and TARGETDIR in InstallWinG() function.A
System.inia
386Enha
keyboardR
GetProfString failed looking for keyboard under 386Enh in system.iniA
System.inia
boota
keyboard.drvR
GetProfString failed looking for keyboard.drv under boot in system.iniA
*vkd(
*wt_vkd(
wt_vkd.386(
*vkd(
*wt_vkd(
wt_vkd.386(
The Keyboard line under the 386Enh section contains the value: b
keyboard.drv(
The Keyboard.drv line under the Boot section contains the value: $
Setup needs to modify a Windows program file called a+
system.ini to accommodate the Wonder Tools $
. This change may affect other devices attached to $
your computer (usually a keyboard, mouse, and/or trackball).$
Do you wish to continue with the installation?(
Installation has been canceled per the user's request.A
*wt_vkd(
*vkd(
*wt_vkd(
System.inia
386Enha
keyboardb
*wt_vkd,
System.inia
386Enha
keyboardb
wt_vkd.386
keyboard.drv(
System.inia
boota
keyboard.drvb
keyboard.drv
Could not save SRCDIR and TARGETDIR in InstallVKD() function.A
Goodies.za
Qp32.dllB-
Qp32.dllb
Goodies.za
Qp16.dllB-
Qp32.dllb
VMM32
Goodies.za
wt_vkd.vxdB-
wt_vkd.vxdb
Goodies.za
wt_vkd.386B-
wt_vkd.386b
Wonder.inia
Driversa
SharedCount2
Could not get SharedCount value in wonder.ini.A
Wonder.inia
Driversa
SharedCountb
Could not write SharedCount value in wonder.ini.A
Could not restore SRCDIR and TARGETDIR in InstallVKD() function.A
Could not save SRCDIR and TARGETDIR in a
CommentOutOldVKD() function.*
SYSTEM.INIa
386EnhR
SYSTEM.INIa
keyboardR
keyboard!
SYSTEM.INIa
keyboardR
system.inia9
; The following 'keyboard=' line was commented out by theB
system.inia/
; Wonder Tools installer. If a peripheral stopsB-
system.iniaE
; working, comment out the existing 'keyboard=' in the 386Enh sectionB-
system.inia3
; and uncomment out the following 'keyboard=' line.B-
system.inib%
CommentOutOldVKD() could not find keyboard under 386Enh.A
CommentOutOldVKD() FileGrep Error: System.ini not found.A
CommentOutOldVKD() FileGrep Error: The line exceeds the a
maximum length allowed.*
CommentOutOldVKD() FileGrep Error: An unspecified error a
has occurred.*
CommentOutOldVKD() FileGrep Error: No clue.A
Could not restore SRCDIR and TARGETDIR in CommentOutOldVKD() function.A
Video for Windows will now be installed onto your system. Once the Video for Windows installation has completed, it will restart your computer.
You will then need to shutdown your computer and connect the Wonder Tools $
Please refer to the Installation sheet that came with the $
 for continued instructions.
Note: It is important that you turn your computer off before unplugging your keyboard to plug in the new Wonder Tools $
 or you may damage your computer.
Setup.exe3
Could not save SRCDIR and TARGETDIR in InstallMiles() function.A
Goodies.za	
MSS32.dllA
MSS32.dllb
GOODIES.Za	
MSS16.DLLA
MSS16.dllb
GOODIES.Za
MSSB16.TSKA
MSSb16.tskb
Could not restore SRCDIR and TARGETDIR in InstallMiles() function.A
edit(
SETUPSTR862R%
Disk Space0
temp.txt
temp.txt
In function '%s':
Unable to create dialog.
Make sure the _ISRES.DLL is in _SETUP.LIB.
Errorb&
_sdSIZEa
%s-%ldb
SdRegisterUserEx!
ResultA
szNameA
szCompanyA
szSerialA
SdRegisterUserEx!
szNameA
szCompanyA
szSerialA
ResultA
SdRegisterUser!
ResultA
szNameA
szCompanyA
SdRegisterUser!
szNameA
szCompanyA
ResultA
SdConfirmRegistration!
ResultA
SdConfirmRegistration!
ResultA
SdConfirmNewDir!
ResultA
SdConfirmNewDir!
ResultA
SdAskDestPath!
ResultA
szDirA
SdAskDestPath!
szDirA
ResultA
SdWelcome!
ResultA
SdWelcome!
ResultA
SdShowInfoList!
ResultA
SdShowInfoList!
ResultA
SdSelectFolder!
ResultA
szFolderA
SdSelectFolder!
szFolderA
ResultA
SdSetupType!
ResultA
szDirA
SdSetupType!
szDirA
ResultA
SdShowAnyDialog!
ResultA
SdShowAnyDialog!
ResultA
SdDisplayTopics!
ResultA
SdDisplayTopics!
ResultA
SdShowMsg!
SdShowMsg/
_sdRECTa
_sdRECTa
bottom2
SdAskOptionsList!
ResultA
ComponentA
SdAskOptionsList!
ComponentA
ResultA
SdShowFileMods!
ResultA
nSelectionA
SdShowFileMods!
nSelectionA
ResultA
SdShowDlgEdit1!
ResultA
szEdit1A
SdShowEdit1!
szEdit1A
ResultA
SdShowDlgEdit2!
ResultA
szEdit1A
szEdit2A
SdShowEdit2!
szEdit1A
szEdit2A
ResultA
SdShowDlgEdit3!
ResultA
szEdit1A
szEdit2A
szEdit3A
SdShowEdit3!
szEdit1A
szEdit2A
szEdit3A
ResultA
SdAskOptions!
ResultA
ComponentA
SdAskOptions!
ComponentA
ResultA
SdComponentDialogAdv!
ResultA
ComponentA
szDirA
SdComponentDialogAdv!
szDirA
ComponentA
ResultA
SdComponentMult!
ResultA
ComponentA
SdComponentMult!
ComponentA
ResultA
SdOptionsButtons!
ResultA
SdOptionsButtons!
ResultA
SdBitmap!
ResultA
SdBitmap!
ResultA
SdComponentDialog2!
ResultA
ComponentA
SdComponentDialog2!
ComponentA
ResultA
SdComponentDialogEx
SdComponentDialogEx!
SdComponentDialog!
ResultA
ComponentA
szDirA
SdComponentDialog!
szDirA
ComponentA
ResultA
SdLicense!
ResultA
ResultA
SdStartCopy!
ResultA
ResultA
SdFinishReboot!
ResultA
BootOptionA
ResultA
BootOptionA
ResultA
ResultA
BootOptionA
SdFinish!
ResultA
bOpt1A
bOpt2A
ResultA
bOpt1A
bOpt2A
GetModuleHandle/
ShowWindow!
SetFocus!
GetDlgItem!
Enable!
SetWindowText!
IsWindow!
GetWindowRect!
WINRECTSTRUCTa
origX2
WINRECTSTRUCTa
origY2
WINRECTSTRUCTa
relX2
WINRECTSTRUCTa
relY2
GetClientRect!
WINRECTSTRUCTa
origX2
WINRECTSTRUCTa
origY2
WINRECTSTRUCTa
relX2
WINRECTSTRUCTa
relY2
SetWindowPos!
MoveWindow!
PostMessage!
InstallShield can not call DLL function: b
unInstallShield
SOFTWARE\MICROSOFT\WINDOWS\CURRENTVERSION\UNINSTALLb
UninstallString2
NONE(
UninstallStringB
_EWQ-
_MRQT$
3.00.074