• On/Off function to control fluorescent lights, air conditioners, coffee pots, fans etc.
• Designed to operate with 230V AC 500W loads.

The appliance module is a 500W receiver unit that works as a remote controlled switch or relay. the connected load can be used at any wall sockets in the house. The appliance module can switch incandescent lamps up to 500W, appliances with electric motors up to 250W or halogen floor lamps with foot dimmer up to 500W. As the X-10 switch is simply inserted into wall sockets like an ordinary plug, there is no installation to be carried out. Just set the wheels on the front to the desired device address (eg. G7) and note this address down.

The load connected to the switch module can still be controlled locally by its own switch, bit don't forget to leave the local switch in the "ON" position, as otherwise the load cannot be controlled by an X-10 controller. Switch the load off by remote control. The unit responds to "standard" X-10 commands. ie. All-Units-Off, On and Off.