image
Fun Project No.3 by Slate World Ltd
Company: Slate World Ltd

Fun project No.3

A garden walkway for Crazy Paving

  1. Dig out about 75-100mm of ground over the length and width of the proposed walkway or path. Install bender board along each side to define the walkway of about say 700 mm wide.

  2. Spread fine crushed granite (fines) to about 25mm from the top. Rake smooth, then water down with a garden spray.

  3. Lay some pieces of Crazy Paving irregular shape slates randomly along the walkway. Fit the sides together as best you can by sorting the material for matching edges.

  4. Spread more fines to bring the fines to the same level as the slates. Wash in with a garden spray. The walkway is ready to use and will become firm and very durable.

You will have an attractive and durable walkway, at minimum effort and expense. Try using, say, China Multicolour slate pieces with an occasional piece of Sea Green interspersed for a natural and dramatic effect.

Have fun, enjoy your home, and tell me about your project.

image
image
image
image
image
image
image