Screw Fastening Systems | |
5.3.1 | Kwik-Con II+ Fastening System |
5.3.1.4 INSTALLATION INSTRUCTIONS |
Determining
the Correct Kwik-Con II+ Fastener and Hole Depth The Kwik-Con II+ masonry fastening system consists of the Kwik-Con II+ fastener, the Kwik-Con II+ drive tool, and a TKC or TKB matched tolerance carbide-tipped drill bit. Consistent performance and maximum pullout strength can be assured only when all three elements of the system are properly used. Fastener
Length Kwik-Con II+ fasteners come in two diameters--1/4" and 3/16". The diameter of the fastener and the depth of embedment affect pullout strengths. Application strength requirements and safety factors should be considered when determining the depth of embedment and fastener diameter. For assistance, contact your local Hilti Sales Representative. Hole
Depth Hole
Diameter |
A = Fixture being
attached B = Kwik-Con II+
embedment A + B = Length Kwik-Con II+ to be used B
+ C = Depth of hole drilled |
Head Styles
|
TORX Hex
Washer Head Washer head provides a bearing surface for fast, secure driving TORX and Phillips
Flat Head |
[MAIN MENU] | [TABLE OF CONTENTS] | [SELECTOR GUIDE] |
[FIRESTOP PROGRAM] | [HAP PROGRAM] | [DECKING PROGRAM] |
[HILTI WEB SITE] | [SEARCH] | [SUBMITTAL PACKAGE] |
[Product Description] | [Product Approvals] | [Guide Specifications] | [Material Specifications] | [Technical Data] |
[Installation] | [Ordering] | [MSDS] | [Video] | [Product Data] |