HyCD Play&Record System Requirements

PLAY&RECORD SUPPORTS THE FOLLOWING OS PLATFORMS:

Windows 95; OSR2
Pentium 166Mhz
32MB RAM
 Required Microsoft Explorer, 4.01 with SP 1 (full install)
    This will fix many bugs on "My Computer and Explorer".  Please update it even if
    you are using the Netscape Browser.

Windows 98
Pentium 166Mhz
32MB RAM
    Optional-- Update your system via Start / Windows Update to keep up with the latest releases
     from Microsoft

Windows NT 4.0 (Service Pack 3 and above)
Pentium 166Mhz
32MB RAM
  Required Internet Explorer, 5.0 (full install)
    This will fix many bugs on "My Computer and Explorer".  Please update it even if
    you are using the Netscape Browser.

IMPORTANT: List Of Supported Recorders

BEFORE YOU PURCHASE OUR SOFTWARE, PLEASE CHECK THE LIST BELOW TO MAKE SURE THAT WE SUPPORT YOUR RECORDER.

Acer 6206A, 6232A, 4232A, 4432A, 4x4x32, 4x2x32, 2x2x32, 6432A, 8432A
Hewlett Packard 7100, 7200i (internal), HP 7500, HP 8100(IDE), HP 8110(IDE), HP 8200, HP9100(IDE), HP9200 (internal SCSI)
IDE-CD R/RW 2x2x24
Imation CD-R IMR080020
Iomega Zip CD, Zip CD 650
JVC XR-W 2080
LG 8041
Matsushita CD-R 7502
Memorex CDRW-4420
Mitsumi 2801, 4801, 4802, 4804te
Panasonic 7502
Philips CDD3600, 3610, 3801, 4201, 4401
Philips PCA382, 804
Plextor PX-R412C, 4220, 820, PX-W8432ti, PX-W124TSi
Ricoh 6200A, 6201S, 7040A, 7040S, 7060A, 7060S, RW7060A, RW7060S, RW7080A
SCSI-CD ReWritable 2x2x6
Sony CD-R 926S, 928
Sony CD-RW 100e
Teac 56S
Traxdata CDRW2224 PLUS, CDRW2260+, CRW2260 PRO
Waitec WT2422EI
Yamaha CDR400(c/t), 2216s, 4260, 4261, 4416(e/s), 6416S, CRW8424s

Please Note that your Recorder must have the latest firmware revision installed on your OS.  Please visit your CD-Recorders Web site to obtain the latest firmware updates.

If you Don't see your favorite recorder on the list, Please contact the company that makes the recorder and ask them to contact us! Come back often to see if your recorder
has been added to our list!

Free for Personal Use.

Most CD readers, although rated faster than 6X for data reading, can onlly extract audio at 6X reliably.  Because of this, we set the audio extraction speed to 6X by default.  If this is still too fast, the speed will be reduced automatically until the correct setting is reached.  The only readers that can extract audio at a higher speed reliably are made by Plextor.  If you use one of these readers the software will extract the audio at a higher speed.