#
        | README file for SNOOP.EXE, ver. 3.05
	|
	|       WINNER 100VL
	|       WINNER 1000
	|       WINNER 2000
	|       WINNER 1000PRO
	|       WINNER 2000PRO
	|       WINNER 1000PRO/X
	|       WINNER 2000PRO/X
	|       WINNER 1000TRIO
	|       WINNER 1000TRIO/V
        |       Victory 3D
	|
	| Copyright (c) 1994-96 ELSA GmbH, Aachen (Germany)
	|
        |                                     Subsidary:
        | ELSA GmbH                           ELSA Inc.
        | Sonnenweg 11                        2150 Trade Zone Blvd.
        | D-52070 Aachen                      Suite 101
        | Germany                             San Jose, CA 95131
        |                                     USA
        |
        | Phone      : +49-241-9177-0         Phone: +1-408-935-0350
        | Support Fax: +49-241-9177-213       Phone:  1-800-272-ELSA
        | BBS (modem): +49-241-9177-981       Fax  : +1-408-935-0370
        | BBS (ISDN) : +49-241-9177-7800      BBS  : +1-408-935-0380
        | CompuServe : GO ELSA                CIS  : GO ELSA
        | WWW        : http://www.elsa.de     WWW  : http://www.elsa.com
        |
        | 03/29/96, ba


	Table of contents

	1.      Introduction
	1.1     VL  - Graphics Boards
	1.2     PCI - Graphics Boards
	2.      Supported Graphics Boards
	3.      Using SNOOP
	4.      Cable connection


------------------------------------------------------------------------

1.      Introduction

	If a WINNER graphics board (e.g. WINNER 1000PRO) on the VL or
	PCI bus and a second, non-VGA graphics board (e.g. WINNER
	1280) are used at the same time, they may be connected via the
	feature connector.

	In this case only one of the hardware color palettes may be
	programmable, depending on the bus type (VL or PCI). This can
	cause incorrect colors to be displayed by one of the graphics
	boards.

	The SNOOP program allows to define the behavior of palette
	programming. This enables the user to see the correct colors on
	his monitor if it is connected to the second graphics board and
	displays the VGA screen via the feature connector.


1.1     Graphics boards on the VL Bus, WINNER 1000TRIO-PCI, WINNER
        1000TRIO/V and VICTORY 3D:

	SNOOP allows to choose wether only the color palette on the
	VGA board or both color palettes can be programmed.


1.2     Graphics Board on the PCI Bus with the exception of WINNER
        1000TRIO-PCI, WINNER 1000TRIO/V and VICTORY 3D:

	SNOOP allows to define which color palette can be programmed.
	It is not possible to activate both palettes at the same time.

	You should select "SNOOP OFF" before running Windows or other
	high resolution applications on the PCI WINNER graphics board.


------------------------------------------------------------------------

2.      Supported Graphics Boards

	The following ELSA graphics boards are supported by the program
        SNOOP.EXE in version 3.05 dated March 29th 1996:

		WINNER 100VL
		WINNER 1000-VL
		WINNER 2000-VL
		WINNER 1000-PCI
		WINNER 1000PRO-VL
		WINNER 2000PRO-VL
		WINNER 1000PRO-PCI
		WINNER 2000PRO-PCI
		WINNER 1000PRO/X
		WINNER 2000PRO/X
		WINNER 1000TRIO
		WINNER 1000TRIO/V
                VICTORY 3D


------------------------------------------------------------------------

3.      Using SNOOP

	Command line syntax:

		SNOOP [ON/OFF]

	Command line parameters:

        ON:  VL graphics boards, WINNER 1000TRIO-PCI, WINNER
             1000TRIO/V and VICTORY 3D:
	     The color palettes of both graphics boards will be
	     programmed.

             PCI graphics boards without WINNER 1000TRIO-PCI, WINNER
             1000TRIO/V and VICTORY 3D:
	     The color palette of the second graphics boards will be
	     programmed.

	     This setting is used to display the VGA screen via the
	     feature connector on the monitor connected to the second
	     graphics board.


	OFF: Only the color palette of the VGA graphics boards will be
	     programmed.

	     This setting is used to display high resolution graphics
	     (Windows, CAD etc.) on the monitor connected to the WINNER
	     VGA board.


	(none): The SNOOP program will display a help screen an the
	     current setting when called without command line
	     parameters.


------------------------------------------------------------------------

4.      Cable connection

	Connect the ELSA VL/PCI-board with the flat conductor cable to
	the second graphics board. Only for ELSA WINNER 1000TRIO and
	WINNER 1000TRIO/V the cable have to be twisted one times.