SPEA Hotline Information =========================================================================== Trouble Shooting Guide .............. Document G: Windows95 - Configuration SPEA V7 series Release 0696.5 =========================================================================== IMPORTANT NOTE Please also check the references to driver updates and to system-configurations in the respective help file. Windows 95 =========================================================================== Questions !.Answers --------------------------------------------------------------------------- How are (new) Windows 95 drivers installed ? !.G1 The graphics board isn't properly initialized by Windows 95? !.G2 The graphics board is properly installed and functioning according to the Device Manager, but resolutions over 640x480 can't be selected; multisync monitor has difficulties synchronizing? !.G2 Display incorrect: pixel artefacts, scroll bar runs independantly? !.G3 DOS full screen mode blanks screen but system still responds? !.G4 Windows 95 very slow? !.G5 Windows 95 hangs when shutting system down? !.G3 Windows 95 hangs when starting the system? !.G6 V7-VEGA Video: Windows 95 (German) won't boot? !.G100 V7-VEGA: are there drivers for Windows 95? !.G105 V7-STORM PRO - when will drivers be available for Windows 95? !.G101 V7-ShowTime: Button for Camera is not active. !.G109 V7-ShowTime: video acceleration for AVI files not working? !.G110 MPEG file playback causes error message "MMSYSTEM296... file can not be played ..." or "Illegal dynalink" !.G111 V7-ShowTime: Video CD or Cdi replay not possible? !.G112 V7-Mercury P64: Icons incorrectyl displayed. !.G107 .G103 V7SETUP: user-defined modes not available? !.G102 Animated cursor not possible? !.G106 Icons not correct, cursor is a black square? !.G103 During the driver installation: file ERGO640 not found? !.G104 V7-ShowTime + Crunch It: Icons halved? !.G107 How do I remove the V7 logo when starting Windows? !.G114 Windows95 - Configuration =========================================================================== Answers --------------------------------------------------------------------------- G1 In order to deinstall the old BIGWIN driver (or to install the new one) the following (existing) files are to be deleted : V7*.* SPEA*.* S3*.* BIGW*.* V7START.DLL [CAR1K.DRV] Block in the file SYSTEM.INI Important note: Reset the system to Standard VGA (see Windows95-SystemControl-Display) and then start the installation from the SPEA CD. The installed board will be automatically identified and installed. Do not manually copy files from the CD to your hard disk or use any other method to install the hardware. This can have drastic consequences for your PC! G2 For V7-Mirage, V7-Mirage P64 with the S3 Vision864 chip, V7-Mercury, V7-Mercury P64 please make sure that your AUTOEXEC.BAT calls the VESA driver V7xxxVBE.EXE and that its path is correctly stated. V7-Mirage -> V7mirvbe.exe V7-Mirage P64 / P32 -> V7mipvbe.exe V7-Mercury -> V7mervbe.exe V7-Mercury P64 -> v7mepvbe.exe It is possible that you have used another graphics board in your system and that this has not yet been removed from the registry. Use the operating system programs (Device Manager) to check this and ammend if necessary. G3 Edit your SYSTEM.INI in the [CAR1K.DRV] section and change the line CHIPSYNC=0 to CHIPSYNC=1. Start an anti-virus program. G4 Please make sure that you are using the drivers for Windows 95 and not those for Windows 3.x and make shure that no other desktop program (e.g. Norton Desktop) is active. Your V7SETUP will show you the current driver correctly such as BIGWIN95 Version x.xx. If this is not the case -> G1. G5 Microsoft recommends user to install the release version on a clean system (i.e. not to install over a previous beta version). G6 System Bios: Award Chipset Features... set option CACHE TIMING CONTROL to NORMAL. G100 The V7-VEGA VIDEO must have BIOS version 5.09 at least. Owners of boards with older BIOS versions should proceed as follows: During the system start, press the F8 key to open the boot menu and select the input prompt option. Edit your AUTOEXEC.BAT and include the line MODE CO80, then boot the system again. G101 Drivers are only available for PCI versions of boards with a Weitek processor (V7-STORM PRO). They are on the BBS. G102 For those boards not fitted with an EEPROM (Mirage with Trio32/64, Mirage P64V, Mercury P64V) reboot and start SPTUNE with the Explorer. Use this program to configure your monitor. When you restart the system the modes will be available as 'user-defined' (scroll to see). Note: V7HFREQ must be loaded via your AUTOEXEC.BAT with the option /T. G103 -Change the entry BASEADDRESS=0 to 1 or 2 in the [CAR1K.DRV] block of your SYSTEM.INI file. -Win95: Your Win95 directory contains a file "ShellIconCache" whose short form is Shelli~1 (instead of 1 it is possible that 2,3,4... etc. may be shown). This is a hidden file (hidden attribute). Win95 uses this file to remember the icon properties. Delete this file (back it up and remove the hidden attribute first!) Windows 95 will then display the icons correctly the next time. G104 It is most likely that you have selected the wrong driver for your board from the BBS or CD. Check and correct if necessary. G105 Please use the CIRRUS LOGIC CL54xx drivers offered with Windows 95 or the SPEA Win3.11 driver supplied with the board. G106 This function is implemented in version 2.10 of the V7-S3 driver. G107 Right-click on the desktop, select Properties/Display and in the list 'Display element' select 'Symbol'. Change the value for the size e.g. from 32 to 40. Then select Accept before changing back to 32 and exiting. The display will be correct until the resolution is changed. G108 If you use programs that access a modem under Windows then you should change your SYSTEM.INI file's [CAR1K.DRV] block from CHIPSYNC=0 to CHIPSYNC=1. G109 Install the latest drivers (see CompuServe or Mailbox)! First install the basic software (GDC) and then the Bigwin driver for Windows 3.x (V7SETUP). Next, install the BigWin driver for Windows95 (V7SETUP with rotating globe) over the previous driver. If the DOS box has been called then the camera button is made inactive and the overlay window is no longer possible. At present there is only one workaround: restart Win95 in order to reactivate the camera button. A proper solution will be provided as soon as possible. G110 Windows 95 doesn't support the Windows 3.1 DCI hardware acceleration. SPEA will be able to provide a driver update when Microsoft releases the Direct Draw functionality for Windows 95 expected in 1996. G111 With Mercury P64 V and Mirage P64 V boards this message only appears when then hardware acceleration is activated. This function is currently not supported by Windows 95 (see G110). V7-ShowTime: the microcode driver hasn't been loaded when the MediaStation is called: a) Start STTEST under DOS first. b) Configure (using V7SETUP) a higher refresh rate than the basic rate offered for the desired resolution. Then select a lower frequency in a further session. G112 Install the 'old' DOS drivers for the CD drive with the latest MSCDEX driver from Win95. Deactivate the 32-Bit access for the hard disk (test). G114 Include the following line in the [CAD1K.DRV] block of your SYSTEM.INI: LOGOOFF=1 --------------------------------------------------------------------------- -170696-TV-