SPEA Hotline Information
===========================================================================
Trouble Shooting Guide ................................... CAD Applications
GALLERY-HILITE-FGA-FIRE                              (Final) Release 0696.4
===========================================================================


Important note:
---------------
For this type of ISA based boards no more driver updates will be available.
The version of the following support notes is the final revision.  


Various CAD Application Configurations
===========================================================================
Questions                                                         !.Answers
---------------------------------------------------------------------------

    Are there CADdy 9.0 drivers for FGA und HiLite ?              !.D1

    Are there CADdy 9.0 drivers for Fire und 860GX ?              !.D2

    Are there CADdy 8.0 drivers ?                                 !.D3

    How to install 3D-Studio 3.0 with FIRE, HiLite and FGA        !.D4

    HILITE and 3DS 3.0, configuration of the driver 
    abort, message:
    Abnormal program termination: memory protection fault...      !.D5



Various CAD Application Configurations
===========================================================================
Answers
---------------------------------------------------------------------------

D1  FGA and HiLite use a special TIGA-driver by Ziegler Instruments.
    Find the corresponding TIGA-interface-drive on the Superdisk.
    Start the installation with A:INSTALL from disk 1.

D2  Fire and 860GX use a special driver by Ziegler Instruments.
    Find the corresponding interface-driver (SPDRIVER) on the Superdisk.
    Start the installation with A:INSTALL from disk 1.

D3  You can continue to use CADdy 8.0 with our CFOCUS driver.

D4  Set the environment-variable RCPADI (see the manual) and check with
    the DOS-command SET whether it is really set.
    Start the Vibrant driver configuration: 3DS VIBCFG
    Select RCPADI for the first graphics board.
    Configure all displays (Keyframer, Renderer...) for RCPADI.
    The file 3DS.SET will be automatically modified.

D5  Install the latest Hilite firmware (to get new video modes) from a 
    Superdisk rel 0294.7 or later.

---------------------------------------------------------------------------
-170696-TV-