******************************
         IMPORTANT INSTALLATION NOTES
        ******************************


        There are two steps that you must follow to install your new
        fonts into Microsoft Windows:  
        
           Step 1:  You must install the actual font files into 
                    your Windows "system" directory by using the 
                    setup program contained on the program disk.

           Step 2:  After the files are installed on your hard
                    drive, you must then access the Windows 
                    "Control Panel" to install the fonts into the 
                    Windows operating system.


        Quick instructions for both of these steps are contained in 
        this document.  If you need more help, please refer to your 
        product manual for additional details.

        IMPORTANT:  Your new fonts are stored on the program disks in
        compressed format to save space.  Do not try to copy the files
        manually.  The setup program will uncompress and install the
        font files into your system directory.




        ******************************
         STEP ONE:  THE SETUP PROGRAM
        ******************************

        
        As mentioned above the first step is to install the actual 
        font files on to your hard drive in the system directory.
        To do so, insert the main program disk into your 3-1/2 inch
        disk drive on Drive A or Drive B.

        From Windows "Program Manager" (the first Window that appears
        on screen whenever you start Microsoft Windows), select the
        "FILE" menu option on the left side of the menu bar which is
        located at the top of the screen.  A list of menu items will 
        appear.  
        
        Now select the "RUN" menu item and a text entry box will 
        pop into view.  Locate your mouse cursor on the text entry
        box and click your left mouse button one time to fix the
        cursor inside the box.

        If you did everything right, the cursor will change from an
        "arrow" into a flashing "i-beam".  If not, click on the box
        again until the mouse cursor changes shape.

        Type the following command to start the Fonts! Fonts! Fonts!
        setup program:

                    A:\SETUP     ( and then press the ENTER key )

        Or, if your program disk is located in Drive B, substitute 
        the letter "B" for "A".  Do not type any of the text which
        follows the word "setup".   Simply press the ENTER key after
        the setup command has been entered.

        At this time, the setup program will begin.  Follow the on
        screen instructions to install the font files on your hard
        drive.  If you need any additional help, refer to the program 
        manual.

                                VERY IMPORTANT!

        Microsoft Windows will expect to find your font files in the
        Windows "system" directory.
        
        If you installed Microsoft Windows in the default directory
        location (i.e. you did not change any of the settings during
        the installation), then C:\WINDOWS\SYSTEM will be the default
        directory where Windows will locate your fonts when it needs
        them.  Press the ENTER key or click your mouse on the "OK" 
        button to install the fonts into C:\WINDOWS\SYSTEM.

        If you installed Microsoft Windows on a different disk drive
        or in a custom directory of your own choosing, then type in
        the full path to the "system" directory in the text entry box. 
        Press the ENTER key or click your mouse on the "OK" button to
        install the fonts.

        The setup program will now install the font files on your hard
        drive.  When the setup program is over, you will be prompted to
        create a new Windows program group for Fonts! Fonts! Fonts!
        Select the "OK" button or press the ENTER key to install this
        document and the special "True Type Viewer" program into the 
        new program group.




        ***************************************************
         STEP TWO:  USE CONTROL PANEL TO INSTALL THE FONTS
        ***************************************************

        After your fonts are installed on your hard drive, they must be 
        installed into the Windows operating system before they can be
        used.  If this is a confusing notion, then compare your new font 
        files to a tray of freshly baked cookies.  They are just out of 
        the oven but you still have to put them on a serving tray before 
        you can eat them.
        
        Windows fonts can be added and removed at any time with a special 
        Fonts utility which is found in your Windows Control Panel.  Full 
        instructions on how to use the Control Panel Fonts program are
        contained in your product manual with illustrations.  Please
        refer to your manual at this time.

        If you are already familiar with the Fonts installation utility,
        here is a quick summary of the steps which you must follow:

                1.  Double-click your mouse on the "Main" program
                    group to locate the "Control Panel" icon.

                2.  Double-click on the "Control Panel" icon.
                
                3.  Double-click on the "Fonts" icon.
                
                4.  When the Fonts window appears, click your mouse
                    on the "ADD" button.

                5.  Click your mouse on the "System" subdirectory
                    which appears in the list box in the lower left
                    corner of the Fonts window.

                6.  Double click your mouse on the name of any font
                    that you want to install.

                7.  After the font is installed, it will appear in a
                    "Sample" box at the bottom of the Window.  If you
                    do not want to use the font, select the "Remove"
                    button.

                8.  After you install the fonts that you want to use,
                    close all Windows and return to Program Manager.


                Thank you for using this CompuWorks software program!




                -------------------------
                Installation Notes - End