IBM ThinkPad October 15, 1996 Utility Diskette for Windows 3.1/Windows 95 Version 3.51 ============================================================= Note: From the version 3.50, the programs have been grouped by operating system. For Windows3.1 and Windows 95 user, following diskettes are needed. Utility Diskette for Windows3.1/Windows95 Utility Diskette for DOS, Personalization What The Diskettes Do ----------------------- The Utility Diskettes for Windows 3.1/Windows95 provide the following utility programs for Windows 3.1 and Windows 95: - ThinkPad Features program (setup program) - Fuel-Gauge program - Docking Control program for Windows3.1 Supported Models ---------------- - ThinkPad 560 - ThinkPad 365X or 365XD - ThinkPad 760E, 760ED, 760EL, or 760ELD - ThinkPad 760C, 760CD, 760L, or 760LD Released Versions ----------------- Version 3.50 Initial release Version 3.51 Support for new functions and fix for problems Summary of Changed or Fixed Items --------------------------------- Key: Diskette version (for example, 1.00 means Version 1.00) (New) New function or enhancement (Fix) Correction to existing function (Restriction) Remaining restriction <3.50> - (New) Support for the XGA panel. - (New) (For Windows 95 only) The resolution and color settings are available. - (Fix) (For Windows 95 only) APM (advanced power management) now reports the same remaining time as the Fuel-Gauge program does. - (Fix) (For Windows 95 only) The child functions of Mwave, such as Sound Blaster or modem, is now selectable. - (Fix) DMA button is always properly unselectable in EPP mode. - (Fix) An incorrect conflict error will not occur when Sound Blaster is disabled. - (Fix) Installation program displays a warning message if a more recent version program has been already installed. - (Fix) (For Windows 95 only) Fuelwin (Fuel-Gauge program for Windows) does not start automatically after installation. - (Fix) Docking option now displays CMOS status correctly. - (Fix) (For Windows 95 and WIN-OS2 only) A disk write error does not occur anymore during hibernation file creation. - (Fix) (For Windows 95 only) The PCI-IDE bus master driver does not cause a data corruption on any hard disk drive. - (Fix) (For Windows 3.1 only) ESS audio now works when its IRQ level is set to IRQ 7 and IRQ 10. - (Fix) (For Windows 95 only) The system does not stop even when an external video card is installed. - (Fix) (For Windows 95 only) Fn+F7 does not works with 16M colors. - (Fix) (For Windows 95 only) Fn+F7 does not corrupt the DOS window screen. - (Fix) (For Windows 95 only) Fn+F7 does not corrupt the screen after exiting Windows 95 to the MS-DOS prompt. - (Fix) Installation program now recognizes a character of space in a responce file properly in CID installation. - (Fix) (For Windows 3.1 only) Restarting Windows is successful even if both the Docking Control program and QEMM Version 8 are installed. - (Restriction) (For Windows 95 only) The Video CD format cannot be recognized by the computer when the PCI-IDE bus master driver is installed. - (Restriction) (For Windows 95 only) When the Adaptec driver and PCI-IDE bus master driver are installed, Windows 95 may report the trap D or E intermittently when the computer is attached to the docking station (with "hot docking"). <3.51> - (Fix) Even if an unexpected PCI adapter card is installed, a system error does not occur. - (Fix) The resources of the multi function PCI adapter card is displayed correctly. - (Fix) (For ESS model only) An ISA adapter card using a 330-333 I/O address works properly. - (Fix) When an external video adapter card is installed, the display advanced setup does not report an error. - (Fix) An incorrect warning message is not displayed even if 56Hz is selected in 800x600/64K. Installation Guide ------------------ (For Windows 3.1) 1. Start Windows 3.1. 2. Select File from the Program Manager window; then select Run... from the pull-down menu. 3. Insert the Utility Diskette for Windows 3.1/Windows 95 into the diskette drive; then type A:˛INSTALLW and press Enter. 4. Follow the instructions on the screen. The default choices are already highlighted at the Installation Options screen. (For Windows 95) Note: If you installed Windows 95 on a computer in which Windows 3.1 and the ThinkPad Features program were already installed, the ThinkPad Features program migrates to the Start Menu of Windows 95 automatically. 1. Start Windows 95. 2. Insert the Utility Diskette for Windows 3.1/Windows 95 into the diskette drive. 3. Click on Start; then click on Run.. 4. Type A:INSTALLW and click on OK. 5. Follow the instructions on the screen. Trademarks ---------- IBM and ThinkPad are trademarks of IBM Corporation. Microsoft and Windows are trademarks of Microsoft Corporation. Intel is trademarks of Intel Corporation.