Int 7A  - Novell Netware - Low-level API - Notes                           [N]


Note:  this interrupt is used for IPX/SPX access in NetWare versions through
     2.0a; in later versions, you should use INT 2F/AX=7A00h to get an
     entry point even though INT 7A still exists.  For both INT 7A and
     the FAR entry point, BX contains the function number; IPX is
     sometimes called internally with BX bit 15 set.

See Also: INT 2F/AX=7A00h,INT 64"Novell",INT 7A/BX=0000h