Int 31 Fn 0008  P - DPMI 0.9+ - Set Segment LIMit                          [E]

   AX = 0008h
   BX = selector
   CX:DX = segment limit

Return: CF clear if successful
   CF set on error
       AX = error code (DPMI 1.0+) (8021h,8022h,8025h) (see AX=0000h)

Notes: CX must be zero for 16-bit DPMI implementations
   limits greater than 1MB must be page aligned (low 12 bits set)
   only modify descriptors allocated with INT 31/AX=0000h
   DPMI 1.0+ automatically reloads any segment registers containing the
     selector being modified
   not supported by MS Windows 3.0 in Standard mode

See Also: AX=0007h,AX=0009h,AX=000Ch,INT 21/AX=3505h,INT 21/AH=E9h"OS/286"

See Also: INT 2C/AX=0003h