[<<Previous Entry]
[^^Up^^]
[Next Entry>>]
[Menu]
[About The Guide]
Int 21 Fn E3 - Novell Netware - File Server - Get Drive Mapping Table [N]
AH = E3h subfn D7h
DS:SI -> request buffer (see below)
ES:DI -> reply buffer (see below)
Return: AL = status
00h successful
C6h no console rights
Notes: this function is supported by Advanced NetWare 2.1+
the calling workstation must have console operator privileges
See Also: AH=E3h/SF=C8h,AH=E3h/SF=D6h,AH=E3h/SF=D9h,AH=E3h/SF=E6h,AH=E3h/SF=E9h
Format of request buffer:
Offset Size Description
00h WORD 0001h (length of following data)
02h BYTE D7h (subfunction "Get Drive Mapping Table")
Format of reply buffer:
Offset Size Description
00h WORD (call) 00ECh (length of following results buffer)
02h DWORD (big-endian) clock tick elapsed since system started
06h BYTE fault tolerance (SFT) level
07h BYTE number of logical drives attached to server
08h BYTE number of physical drives attached to server
09h 5 BYTEs disk channel types (00h none, 01h XT, 02h AT, 03h SCSI,
04h disk coprocessor drive, 32h-FFh value-added drive types)
0Eh WORD (big-endian) number of outstanding controller commands
10h 32 BYTEs drive mapping table (FFh = no such drive)
30h 32 BYTEs drive mirror table (secondary physical drive, FFh = none)
50h 32 BYTEs dead mirror table (last drive mapped to, FFh if never mirrored)
70h BYTE physical drive being remirrored (FFh = none)
71h BYTE reserved
72h DWORD (big-endian) remirrored block
76h 60 BYTEs SFT error table (internal error counters)
This page created by ng2html v1.05, the Norton guide to HTML conversion utility.
Written by Dave Pearson