|
|
|
|
Setting the order of the hard disk drive (Master, Slave) |
|
Jumper Location |
|
 |
|
There are three cases of the installing jumper(shunt)
if the jumper is located in the middle of connectors as above. They are Lower 32GB, Upper 32GB and With capacity limitation
in upper 32GB. |
|
MASTER |
|
| |  | Master in lower 32GB (capacity < 32 GB) | |  | Master in upper 32GB (capacity ≥ 32 GB) | |  | Master with limit capacity in upper 32GB (capacity ≥ 32 GB) | | |
| |
|
SLAVE |
|
When adding another hard disk drive. If you're already using a hard disk drive, the jumper is already set as MA(Master) for this drive. Set the jumper on the addition drive as SL(Slave).
|
|
| |  | Slave in lower 32GB (capacity < 32 GB) | |  | Slave in upper 32GB (capacity ≥ 32 GB) | |  | Slave with limit capacity in upper 32GB (capacity ≥ 32 GB) | | |
|
|
|
CABLE SELECT |
|
When installing with a motherboard which supporting
the cable-select function. You must use the special cable for the cable-select. |
|
| |  | Cable Select in lower 32GB (capacity < 32 GB) | |  | Cable Select in upper 32GB (capacity ≥ 32 GB) | | |
| |
|
 |