home *** CD-ROM | disk | FTP | other *** search
- ; *************************************************************************
- ; This sample NET.CFG file is meant to supply some rudimentary understanding
- ; of parameters in NET.CFG and how they affect network operations.
- ; For a full description and explanation of the parameters, see the
- ; manual for the ODI shell for DOS, which ships with the NetWare package
- ; or is available from Novell part # 100-000871-001.
- ;
- ; Please pay attention to column spacing for the lines. The section header
- ; line MUST start in column 0 with subsequent lines in that section being
- ; indented. Comments are designated by semi-colons (;). The NET.CFG is not
- ; caps-sensitive.
- ;
- ; *************************************************************************
- ;
-
- LINK DRIVER 3C5X9
- ;
- ; The following two parameters are required when using two or more EtherLink
- ; III adapters in a single machine. This parameter specifies which specific
- ; EtherLink III adapter the driver is to attach itself to.
- ; PORT NNN, where NNN is the hex base address of the 3C509 ISA adapter
- ; SLOT NN, where NN is the slot number containing the 3C529, 3C579, or
- ; 3C509 configured as an EISA adatper.
- ;
- ; PORT 200
- ; SLOT 3
- ;
- ; The next few lines specify the frame type. 3C5X9.COM is a 4.0 DOS ODI
- ; driver. The default frame type is 802.2. To connect to a 3.11 server
- ; the frame type needs to be changed to 802.3. The following two lines
- ; perform that change.
- ;
- FRAME ETHERNET_802.3
- PROTOCOL IPX 0 ETHERNET_802.3 (binds IPX protocol to frame)
- ;
- ;
- ; This is the driver default
- ;
- ; FRAME ETHERNET_802.2
- ; PROTOCOL IPX E0 ETHERNET_802.2
- ;
- ;
- ;
- ; %VER NET.CFG - sample Netware DOS ODI configuration file V4.1a
-